Add: seamless boot splash, daemon for disabling keyboard and touchpad, and remove gzip compression on initramfs

.gitignore

@@ -1,4 +1,6 @@
 tmp.*
 PrawnOS-Shiba-*
-PrawnOS-initramfs.cpio.gz
+PrawnOS-initramfs.cpio
 build
+kernel/sources/linux-*.tar.gz
+*.dsc

README.md

@@ -271,7 +271,7 @@ To begin with:
 
 `make filesystem` builds the -BASE filesystem image with no kernel
 
-`make initramfs` builds the PrawnOS-initramfs.cpio.gz, which can be found in /build
+`make initramfs` builds the PrawnOS-initramfs.cpio, which can be found in /build
 
 `make image` builds the initramfs image, builds the kernel, builds the filesystem if a -BASE image doesn't exist, and combines the two into a new PrawnOS.img using kernel_install
 

filesystem/resources/splash-recover-cursor.issue

@@ -0,0 +1 @@
+[?25h[?0c

filesystem/resources/system.conf

@@ -0,0 +1,71 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See systemd-system.conf(5) for details.
+
+[Manager]
+#LogLevel=info
+#LogTarget=journal-or-kmsg
+#LogColor=yes
+#LogLocation=no
+#LogTime=no
+#DumpCore=yes
+ShowStatus=no
+#CrashChangeVT=no
+#CrashShell=no
+#CrashReboot=no
+#CtrlAltDelBurstAction=reboot-force
+#CPUAffinity=1 2
+#NUMAPolicy=default
+#NUMAMask=
+#RuntimeWatchdogSec=0
+#RebootWatchdogSec=10min
+#ShutdownWatchdogSec=10min
+#KExecWatchdogSec=0
+#WatchdogDevice=
+#CapabilityBoundingSet=
+#NoNewPrivileges=no
+#SystemCallArchitectures=
+#TimerSlackNSec=
+#StatusUnitFormat=description
+#DefaultTimerAccuracySec=1min
+#DefaultStandardOutput=journal
+#DefaultStandardError=inherit
+#DefaultTimeoutStartSec=90s
+#DefaultTimeoutStopSec=90s
+#DefaultTimeoutAbortSec=
+#DefaultRestartSec=100ms
+#DefaultStartLimitIntervalSec=10s
+#DefaultStartLimitBurst=5
+#DefaultEnvironment=
+#DefaultCPUAccounting=no
+#DefaultIOAccounting=no
+#DefaultIPAccounting=no
+#DefaultBlockIOAccounting=no
+#DefaultMemoryAccounting=yes
+#DefaultTasksAccounting=yes
+#DefaultTasksMax=
+#DefaultLimitCPU=
+#DefaultLimitFSIZE=
+#DefaultLimitDATA=
+#DefaultLimitSTACK=
+#DefaultLimitCORE=
+#DefaultLimitRSS=
+#DefaultLimitNOFILE=1024:524288
+#DefaultLimitAS=
+#DefaultLimitNPROC=
+#DefaultLimitMEMLOCK=
+#DefaultLimitLOCKS=
+#DefaultLimitSIGPENDING=
+#DefaultLimitMSGQUEUE=
+#DefaultLimitNICE=
+#DefaultLimitRTPRIO=
+#DefaultLimitRTTIME=

initramfs/resources/initramfs-init

@@ -17,12 +17,11 @@
 # You should have received a copy of the GNU General Public License
 # along with PrawnOS.  If not, see <https://www.gnu.org/licenses/>.
 
-echo In PrawnOS Init
 
 #add this to start shell at desired point
 rescue_shell() {
-    [ "{$1}" != "debug" ] && echo "Something went wrong. Dropping to a shell." > /dev/tty1
     [ "{$1}" == "debug" ] && echo "Debug flag detected, entering debug shell" > /dev/tty1
+    dmesg -n 4
     echo "Something went wrong. Dropping to a shell." > /dev/tty1
     exec setsid /bin/sh -c 'exec /bin/sh </dev/tty1 >/dev/tty1 2>&1'
 }
@@ -66,14 +65,26 @@ mount -n -t devtmpfs devtmpfs  /dev
 # get the root device, so we can find the boot partiton
 UNPARSED=$(cmdline root)
 ROOT_PARTUUID=$(rootpartuuid $UNPARSED)
-echo ${ROOT_PARTUUID} > /dev/tty1
 BLKID=$(/sbin/blkid | grep $ROOT_PARTUUID )
-echo ${BLKID} > /dev/tty1
 #If its an mmcblk device, the kernel partiton will p1. If it is a usb device, the partiton will just be 1
 #Just want everything before the 1
 ROOT_DEV="${BLKID%1:*}"
 
-echo ${ROOT_DEV} > /dev/tty1
+
+# happens when kernel takes its time looking for devices
+if [ -z ${ROOT_DEV} ]
+then
+    sleep 1
+    # get the root device, so we can find the boot partiton
+    UNPARSED=$(cmdline root)
+    ROOT_PARTUUID=$(rootpartuuid $UNPARSED)
+    BLKID=$(/sbin/blkid | grep $ROOT_PARTUUID )
+    #If its an mmcblk device, the kernel partiton will p1. If it is a usb device, the partiton will just be 1
+    ROOT_DEV="${BLKID%1:*}"
+    # if device is still not seen, bail out
+    [ -z ${ROOT_DEV} ] && rescue_shell
+fi
+
 
 # label any partition on the system with RESCUESHELL to enter the initramfs rescue shell before mount and root_switch.
 # you can do this with "cgpt add -i 1 -l RESCUESHELL /dev/sda" for example to label the first partiton of a usb drive.
@@ -89,14 +100,17 @@ then
     dmesg -n 2
     echo "Opening encrypted root partition, this will take 30s..."
     cryptsetup --tries 5 luksOpen ${ROOT_DEV}2 luksroot || rescue_shell
-    dmesg -n 7
     mount /dev/mapper/luksroot /newroot
 else
     # mount the unencrypted root filesystem
     [ -d "/newroot" ] || mkdir -p /newroot
     mount ${ROOT_DEV}2 /newroot
 fi
 
+dmesg -n 1
+echo -e '\033[?17;0;0c' > /dev/tty1 # magically make cursor disappear
+dd status=none if=/newroot/PrawnOS-$(cat /sys/class/graphics/fb0/virtual_size | tr ',' 'x') of=/dev/fb0 # write splash to framebuffer
+
 umount /sys
 umount /proc
 

kernel/resources/arm64/config

@@ -161,17 +161,17 @@ CONFIG_SCHED_AUTOGROUP=y
 # CONFIG_SYSFS_DEPRECATED is not set
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="PrawnOS-initramfs.cpio.gz"
+CONFIG_INITRAMFS_SOURCE="PrawnOS-initramfs.cpio"
 CONFIG_INITRAMFS_ROOT_UID=0
 CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
+# CONFIG_RD_GZIP is not set
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
 CONFIG_BOOT_CONFIG=y
 # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -7315,7 +7315,7 @@ CONFIG_SBITMAP=y
 #
 CONFIG_PRINTK_TIME=y
 # CONFIG_PRINTK_CALLER is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=2
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_BOOT_PRINTK_DELAY is not set

kernel/resources/armhf/config

@@ -158,16 +158,16 @@ CONFIG_NET_NS=y
 # CONFIG_SYSFS_DEPRECATED is not set
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="PrawnOS-initramfs.cpio.gz"
+CONFIG_INITRAMFS_SOURCE="PrawnOS-initramfs.cpio"
 CONFIG_INITRAMFS_ROOT_UID=0
 CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_RD_XZ=y
+# CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
-CONFIG_INITRAMFS_COMPRESSION=".gz"
+CONFIG_INITRAMFS_COMPRESSION=""
 # CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -5275,7 +5275,6 @@ CONFIG_SECURITYFS=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 CONFIG_SECURITY_PATH=y
-CONFIG_LSM_MMAP_MIN_ADDR=32768
 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_HARDENED_USERCOPY_FALLBACK=y
@@ -5302,8 +5301,7 @@ CONFIG_INTEGRITY=y
 CONFIG_INTEGRITY_AUDIT=y
 # CONFIG_IMA is not set
 # CONFIG_EVM is not set
-CONFIG_DEFAULT_SECURITY_SELINUX=y
-# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
 
 #
@@ -5589,7 +5587,7 @@ CONFIG_SBITMAP=y
 #
 CONFIG_PRINTK_TIME=y
 # CONFIG_PRINTK_CALLER is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=1
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_BOOT_PRINTK_DELAY is not set

scripts/BuildScripts/BuildCommon.mk

@@ -165,7 +165,7 @@ PRAWNOS_KERNEL_PACKAGE_IMAGE := $(PRAWNOS_KERNEL_PACKAGES)/prawnos-linux-image-$
 PRAWNOS_KERNEL_PACKAGE_HEADERS := $(PRAWNOS_KERNEL_PACKAGES)/prawnos-linux-headers-$(TARGET)
 
 ### INITRAMFS
-PRAWNOS_INITRAMFS_IMAGE := $(PRAWNOS_BUILD)/PrawnOS-initramfs.cpio.gz
+PRAWNOS_INITRAMFS_IMAGE := $(PRAWNOS_BUILD)/PrawnOS-initramfs.cpio
 
 ### ATH9K
 PRAWNOS_ATH9K_BUILD := $(PRAWNOS_BUILD_SHARED)/open-ath9k-htc-firmware

scripts/BuildScripts/FilesystemScripts/buildFilesystem.sh

@@ -246,6 +246,13 @@ cp $build_resources_apt/deb.prawnos.com.gpg.key $outmnt/InstallResources/
 chroot $outmnt apt-key add /InstallResources/deb.prawnos.com.gpg.key
 chroot $outmnt apt update
 
+#Copy splash screen
+cp $build_resources/PrawnOS-* $outmnt/
+
+#Copy /etc/issue
+mkdir -p $outmnt/etc/issue.d/
+cp $build_resources/splash-recover-cursor.issue $outmnt/etc/issue.d/splash-recover-cursor.issue
+
 #Setup the locale
 cp $build_resources/locale.gen $outmnt/etc/locale.gen
 chroot $outmnt locale-gen
@@ -314,6 +321,24 @@ echo -n "127.0.0.1        PrawnOS" > $outmnt/etc/hosts
 #Cleanup apt retry
 chroot $outmnt rm -f /etc/apt/apt.conf.d/80-retries
 
+#Copy systemd config. This is on the end to make sure that no package overrides this
+cp $build_resources/system.conf $outmnt/etc/systemd/
+
+#install hwdb file for iio-sensor-proxy to work
+printf 'sensor:modalias:platform:*\n ACCEL_MOUNT_MATRIX=-1, 0, 0; 0, -1, 0; 0, 0, -1\n' > $outmnt/etc/udev/hwdb.d/61-sensor-local.hwdb
+chroot $outmnt systemd-hwdb update
+
+#make bootsplash not disappear again
+chroot $outmnt systemctl mask plymouth-start
+chroot $outmnt dpkg-reconfigure -f noninteractive console-setup
+grep -v setfont $outmnt/etc/console-setup/cached_setup_font.sh > /tmp/cached_setup_font.sh
+cp /tmp/cached_setup_font.sh $outmnt/etc/console-setup/cached_setup_font.sh
+
+mkdir -p $outmnt/opt/git/
+cd $outmnt/opt/git/
+rm -rf $outmnt/opt/git/c100pa-daemon
+git clone https://github.com/Maccraft123/c100pa-daemon.git $outmnt/opt/git/c100pa-daemon
+
 # do a non-error cleanup
 umount -l $outmnt > /dev/null 2>&1
 rmdir $outmnt > /dev/null 2>&1

scripts/BuildScripts/InitramfsScripts/buildInitramFs.sh

@@ -165,14 +165,13 @@ chmod +x $initramfs_src/init
 cp $initramfs_src/init $initramfs_src/sbin/init
 
 #compress and install
-rm -rf $outmnt/boot/PrawnOS-initramfs.cpio.gz
+rm -rf $outmnt/boot/PrawnOS-initramfs.cpio
 cd $initramfs_src
 ln -s busybox bin/cat
 ln -s busybox bin/mount
 ln -s busybox bin/sh
 ln -s busybox bin/switch_root
 ln -s busybox bin/umount
 
-# store for kernel building
-find . -print0 | cpio --null --create --verbose --format=newc | gzip --best > $OUT_DIR/PrawnOS-initramfs.cpio.gz
-
+# store for kernel building. gzip is not needed becase kernel + initramfs are gzipped together
+find . -print0 | cpio --null --create --verbose --format=newc > $OUT_DIR/PrawnOS-initramfs.cpio

scripts/InstallScripts/InstallPackages.sh

@@ -240,6 +240,25 @@ do
     done
 done
 
+#install hwdb file for iio-sensor-proxy to work
+printf 'sensor:modalias:platform:*\n ACCEL_MOUNT_MATRIX=-1, 0, 0; 0, -1, 0; 0, 0, -1\n' > /etc/udev/hwdb.d/61-sensor-local.hwdb
+systemd-hwdb update
+udevadm trigger
+
+#make bootsplash not disappear again
+systemctl mask plymouth-start
+dpkg-reconfigure -f noninteractive console-setup
+grep -v setfont /etc/console-setup/cached_setup_font.sh > /tmp/cached_setup_font.sh
+cp /tmp/cached_setup_font.sh /etc/console-setup/cached_setup_font.sh
+
+#daemon for disabling touchpad and keyboard
+mkdir -p /opt/git
+cd /opt/git/
+cd c100pa-daemon
+make
+make install
+systemctl enable c100pa-daemon
+
 usermod -a -G sudo,netdev,input,video,bluetooth $username
 
 dmesg -E