Clean up, see original files on the parent repo

.gitignore

@@ -16,6 +16,7 @@ _autosave-*
 *-save.pro
 *-save.kicad_pcb
 fp-info-cache
+.DS_Store
 
 # Netlist files (exported from Eeschema)
 *.net

README.md

@@ -1,25 +1,13 @@
-# Swoop
+# Arkenswoop
 
-A WIP fork of [David Barr's Sweep](https://github.com/davidphilipbarr/Sweep), which is itself based on the fabulous [Ferris by Pierre Chevalier](https://github.com/pierrechevalier83/ferris).
-
-There are two editions of the Swoop.
-
-<span>
-  <a href="https://discord.com/invite/JxfcFuUGhR">
-    <img src="https://img.shields.io/static/v1?label=Join Discord:&message=Absolem Club&color=6e85ce">
-  </a>
-  <img src="https://img.shields.io/github/last-commit/jimmerricks/swoop">
-</span>
-
-## Swoop LP 🦀
-
-![](./images/swoop_small.jpg)
+A WIP fork of [jimmerricks's Swoop](https://github.com/jimmerricks/swoop), which is a fork of [David Barr's Sweep](https://github.com/davidphilipbarr/Sweep), which is itself based on the fabulous [Ferris by Pierre Chevalier](https://github.com/pierrechevalier83/ferris).
 
 | Front | Back |
 | :---: | :---: |
-| ![front](/images/exports/swoop/front.png) | ![back](/images/exports/swoop/back.png) |
+| ![front](/images/exports/arkenswoop/front.png) | ![back](/images/exports/arkenswoop/back.png) |
 
 ### Features
+
 ⭕ Low profile Kailh Choc switches  
 ⭕ Per-key RGB LEDs (mini-e)  
 ⭕ Dual side-scrolling encoder  
@@ -30,57 +18,25 @@ There are two editions of the Swoop.
 
 ### Components list
 
-To build and use a Swoop LP you will need:
+To build and use an Arkenswoop you will need:
 
 * 1× PCB Kit
+* 1× back plate kit (optional)
 * 2× promicro compatible boards or 2 nice!nanos.
 * 34× Kailh Choc v1 switches
 * 34× SK6812 Mini-E RGB SMD Leds (optional; not recommended for wireless)
 * 34× keycaps
 * 2× side-scrolling encoders
 * 2× OLED LCD Display 128x32 SSD1306 (optional)
 * 2× reset switches (optional; B3U-1000P(M))
-* Some little rubber feet/bumpers
+* Some little rubber feet/bumpers (a minimum of 4 on each side)
 * 2× power switches (wireless only; MSK 12C02)
 * 2× lipo batteries (wireless only; 301230 or 301228)
 * 1× TRRS (not TRS!) cable (wired only)
 * 2× TRRS Jack [PJ-320A] (wired only)
 * 1× USB Cable (depends on your micro-controller choice)
 
-## Swoop MX / Howarya 🦞
-
-![](./images/howarya_small.jpg)
-
-| Front | Back |
-| :---: | :---: |
-| ![front](/images/exports/howarya/front.png) | ![back](/images/exports/howarya/back.png) |
-
-### Features
-⭕ Cherry MX style switches  
-⭕ Hotswap support  
-⭕ Per-key RGB LEDs (mini-e)  
-⭕ Up to 2 encoders  
-⭕ Oled screens  
-⭕ Power switch for battery management  
-⭕ Bluetooth support w/ nice!nano  
-⭕ Plate style case with mcu cover
-
-### Components list
+### Todo
 
-To build and use a Swoop MX you will need:
-
-* 1× PCB Kit
-* 2× promicro compatible boards or 2 nice!nanos.
-* 34-36× Cherry MX style switches
-* 34-36× Kailh hotswap sockets
-* 34-36× SK6812 Mini-E RGB SMD Leds (optional; not recommended for wireless)
-* 34-36× keycaps
-* 2× Rotary encoders & knobs (optional)
-* 2× OLED LCD Display 128x32 SSD1306 (optional)
-* 2× reset switches (optional; B3U-1000P(M))
-* Some little rubber feet/bumpers
-* 2× power switches (wireless only; MSK 12C02)
-* 2× lipo batteries (wireless only; 301230 or 301228)
-* 1× TRRS (not TRS!) cable (wired only)
-* 2× TRRS Jack [PJ-320A] (wired only)
-* 1× USB Cable (depends on your micro-controller choice)
+- [ ] add hotswap socket support
+- [ ] convert the SMD diodes to through hole diodes to ease soldering