Terraform - Hcloud - Talos

---

This repository contains a Terraform module for creating a Kubernetes cluster with Talos in the Hetzner Cloud.

• Talos is a modern OS for Kubernetes. It is designed to be secure, immutable, and minimal.
• Hetzner Cloud is a cloud hosting provider with nice terraform support and cheap prices.

Warning

This module is under active development. Not all features are compatible with each other yet. Known issues are listed in the Known Issues section. If you find a bug or have a feature request, please open an issue.

---

Goals 🚀

Goals	Status	Description
Production ready	✅	All recommendations from the Talos Production Clusters are implemented. But you need to read it carefully to understand all implications.
Use private networks for the internal communication of the cluster	✅
Do not expose the Kubernetes and Talos API to the public internet via Load-Balancer	✅	Actually, the APIs are exposed to the public internet, but secured via the firewall_use_current_ip flag and a firewall rule that only allows traffic from one IP address.
Possibility to change alls CIDRs of the networks	⁉️	Needs to be tested.
Configure the Cluster as good as possible to run in the Hetzner Cloud	✅	This includes manual configuration of the network devices and not via DHCP, provisioning of Floating IPs (VIP), etc.

Information about the Module

• A lot of information can be found directly in the descriptions of the variables.
• You can configure the module to create a cluster with 1, 3 or 5 control planes and n workers or only the control planes.
• It allows scheduling pods on the control planes if no workers are created.
• It has Multihoming configuration (etcd and kubelet listen on public and private IP).
• It uses KubePrism as cluster endpoint.
• If cluster_api_host is set, then you should create a corresponding DNS record pointing to either one control plane, the load balancer, floating IP, or alias IP. If cluster_api_host is not set, then a record for kube.[cluster_domain] should be created. It totally depends on your setup.

Additional installed software in the cluster

Cilium

• Cilium is a modern, efficient, and secure networking and security solution for Kubernetes.
• Cilium is used as the CNI instead of the default Flannel.
• It provides a lot of features like Network Policies, Load Balancing, and more.

Important

The Cilium version (cilium_version) has to be compatible with the Kubernetes (kubernetes_version) version.

Hcloud Cloud Controller Manager

• Updates the Node objects with information about the server from the Cloud , like instance Type, Location, Datacenter, Server ID, IPs.
• Cleans up stale Node objects when the server is deleted in the API.
• Routes traffic to the pods through Hetzner Cloud Networks. Removes one layer of indirection.
• Watches Services with type: LoadBalancer and creates Hetzner Cloud Load Balancers for them, adds Kubernetes Nodes as targets for the Load Balancer.

Talos Cloud Controller Manager

• Applies labels to the nodes.
• Validates and approves node CSRs.
• In DaemonSet mode: CCM will use hostNetwork and current node to access kubernetes/talos API

Prerequisites

Required Software

• terraform
• packer

Recommended Software

• hcloud cli
• talosctl
• kubectl

Hetzner Cloud

Tip

If you don't have a Hetzner account yet, you are welcome to use this Hetzner Cloud Referral Link to claim 20€ credit and support this project.

• Create a new project in the Hetzner Cloud Console
• Create a new API token in the project
• You can store the token in the environment variable HCLOUD_TOKEN or use it in the following commands/terraform files.

Usage

Packer

Create the talos os images (ARM and x86) via packer through running the create.sh. It is using the HCLOUD_TOKEN environment variable to authenticate against the Hetzner Cloud API and uses the project of the token to store the images. The talos os version is defined in the variable talos_version in talos-hcloud.pkr.hcl.

./_packer/create.sh

Terraform

Use the module as shown in the following working minimal example:

Note

Actually, your current IP address has to have access to the nodes during the creation of the cluster.

module "terraform-hcloud-talos" {
  source  = "hcloud-talos/talos/hcloud"
  version = "the-latest-version-of-the-module"

  talos_version = "v1.7.5" # The version of talos features to use in generated machine configurations

  hcloud_token = "your-hcloud-token"
  
  # If true, the current IP address will be used as the source for the firewall rules.
  # ATTENTION: to determine the current IP, a request to a public service (https://ipv4.icanhazip.com) is made.
  # If false, you have to provide your public IP address (as list) in the variable `firewall_kube_api_source` and `firewall_talos_api_source`.
  firewall_use_current_ip = true

  cluster_name    = "dummy.com"
  datacenter_name = "fsn1-dc14"

  control_plane_count       = 1
  control_plane_server_type = "cax11"
}

Or a more advanced example:

module "talos" {
  source  = "hcloud-talos/talos/hcloud"
  version = "the-latest-version-of-the-module"

  talos_version = "v1.7.5"
  kubernetes_version = "1.29.7"
  cilium_version = "1.15.7"

  hcloud_token = "your-hcloud-token"

  cluster_name     = "dummy.com"
  cluster_domain   = "cluster.dummy.com.local"
  cluster_api_host = "kube.dummy.com"

  firewall_use_current_ip = false
  firewall_kube_api_source = ["your-ip"]
  firewall_talos_api_source = ["your-ip"]

  datacenter_name = "fsn1-dc14"

  control_plane_count       = 3
  control_plane_server_type = "cax11"

  worker_count       = 3
  worker_server_type = "cax21"

  network_ipv4_cidr = "10.0.0.0/16"
  node_ipv4_cidr    = "10.0.1.0/24"
  pod_ipv4_cidr     = "10.0.16.0/20"
  service_ipv4_cidr = "10.0.8.0/21"
}

You need to pipe the outputs of the module:

output "talosconfig" {
  value     = module.talos.talosconfig
  sensitive = true
}

output "kubeconfig" {
  value     = module.talos.kubeconfig
  sensitive = true
}

Then you can then run the following commands to export the kubeconfig and talosconfig:

terraform output --raw kubeconfig > ./kubeconfig
terraform output --raw talosconfig > ./talosconfig

Move these files to the correct location and use them with kubectl and talosctl.

Additional Configuration Examples

Kubelet Extra Args

kubelet_extra_args = {
  system-reserved            = "cpu=100m,memory=250Mi,ephemeral-storage=1Gi"
  kube-reserved              = "cpu=100m,memory=200Mi,ephemeral-storage=1Gi"
  eviction-hard              = "memory.available<100Mi,nodefs.available<10%"
  eviction-soft              = "memory.available<200Mi,nodefs.available<15%"
  eviction-soft-grace-period = "memory.available=2m30s,nodefs.available=4m"
}

Sysctls Extra Args

sysctls_extra_args = {
  # Fix for https://github.com/cloudflare/cloudflared/issues/1176
  "net.core.rmem_default" = "26214400"
  "net.core.wmem_default" = "26214400"
  "net.core.rmem_max"     = "26214400"
  "net.core.wmem_max"     = "26214400"
}

Activate Kernel Modules

kernel_modules_to_load = [
  {
    name = "binfmt_misc" # Required for QEMU
  }
]

Known Limitations

• Changes in the user_data (e.g. talos_machine_configuration) and image (e.g. version upgrades with packer) will not be applied to existing nodes, because it would force a recreation of the nodes.

Known Issues

• IPv6 dual stack is not supported by Talos yet. You can activate IPv6 with enable_ipv6, but it should not have any effect.
• enable_kube_span let's the cluster not get in ready state. It is not clear why yet. I have to investigate it.
• 403 Forbidden user in startup log: This is a known issue with Hetzner IPs. See #46 and registry.k8s.io #138

Credits

• kube-hetzner For the inspiration and the great terraform module. This module is based on many ideas and code snippets from kube-hetzner.
• Talos For the incredible OS.
• Hetzner Cloud For the great cloud hosting.