Tag the LUFA 120730 release.

Bootloaders/CDC/BootloaderAPI.c

@@ -38,12 +38,14 @@
 void BootloaderAPI_ErasePage(const uint32_t Address)
 {
 	boot_page_erase_safe(Address);
+	boot_spm_busy_wait();
 	boot_rww_enable();
 }
 
 void BootloaderAPI_WritePage(const uint32_t Address)
 {
 	boot_page_write_safe(Address);
+	boot_spm_busy_wait();
 	boot_rww_enable();
 }
 

Bootloaders/CDC/BootloaderAPITable.S

@@ -1,6 +1,6 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
@@ -28,41 +28,44 @@
   this software.
 */
 
-; Bootloader API Jump Table
-.section .apitable, "ax"
-
 ; Trampolines to actual API implementations if the target address is outside the
 ; range of a rjmp instruction (can happen with large bootloader sections)
-.org 0
-BootloaderAPI_ErasePage_Trampoline:
-	jmp BootloaderAPI_ErasePage
-BootloaderAPI_WritePage_Trampoline:
-	jmp BootloaderAPI_WritePage
-BootloaderAPI_FillWord_Trampoline:
-	jmp BootloaderAPI_FillWord
-BootloaderAPI_ReadSignature_Trampoline:
-	jmp BootloaderAPI_ReadSignature
-BootloaderAPI_ReadFuse_Trampoline:
-	jmp BootloaderAPI_ReadFuse
-BootloaderAPI_ReadLock_Trampoline:
-	jmp BootloaderAPI_ReadLock
-BootloaderAPI_WriteLock_Trampoline:
-	jmp BootloaderAPI_WriteLock
-BootloaderAPU_UNUSED1:
-	ret
-BootloaderAPU_UNUSED2:
-	ret
-BootloaderAPU_UNUSED3:
-	ret
-BootloaderAPU_UNUSED4:
-	ret
-BootloaderAPU_UNUSED5:
-	ret
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPU_UNUSED1:
+		ret
+	BootloaderAPU_UNUSED2:
+		ret
+	BootloaderAPU_UNUSED3:
+		ret
+	BootloaderAPU_UNUSED4:
+		ret
+	BootloaderAPU_UNUSED5:
+		ret
+
+
 
 ; API function jump table
-.org (96 - 32)
+.section .apitable_jumptable, "ax"
 .global BootloaderAPI_JumpTable
 BootloaderAPI_JumpTable:
+
 	rjmp BootloaderAPI_ErasePage_Trampoline
 	rjmp BootloaderAPI_WritePage_Trampoline
 	rjmp BootloaderAPI_FillWord_Trampoline
@@ -76,10 +79,13 @@ BootloaderAPI_JumpTable:
 	rjmp BootloaderAPU_UNUSED4 ; UNUSED ENTRY 4
 	rjmp BootloaderAPU_UNUSED5 ; UNUSED ENTRY 5
 
+
+
 ; Bootloader table signatures and information
-.org (96 - 8)
-BootloaderAPI_Signatures:
+.section .apitable_signatures, "ax"
 .global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
 	.long BOOT_START_ADDR ; Start address of the bootloader
-	.word 0xCDC1 ; Signature for the CDC class bootloader, V1
+	.word 0xDFB1 ; Signature for the DFU class bootloader, V1
 	.word 0xDCFB ; Signature for a LUFA class bootloader

Bootloaders/CDC/BootloaderCDC.c

@@ -61,7 +61,7 @@ static bool RunBootloader = true;
  *  low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value
  *  \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start.
  */
-uint32_t MagicBootKey ATTR_NO_INIT;
+uint16_t MagicBootKey ATTR_NO_INIT;
 
 
 /** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application
@@ -70,8 +70,29 @@ uint32_t MagicBootKey ATTR_NO_INIT;
  */
 void Application_Jump_Check(void)
 {
+	bool JumpToApplication = false;
+
+	#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
+		/* Disable JTAG debugging */
+		JTAG_DISABLE();
+
+		/* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
+		PORTF |= (1 << 4);
+		Delay_MS(10);
+
+		/* If the TCK pin is not jumpered to ground, start the user application instead */
+		JumpToApplication |= ((PINF & (1 << 4)) != 0);
+
+		/* Re-enable JTAG debugging */
+		JTAG_ENABLE();
+	#endif
+
 	/* If the reset source was the bootloader and the key is correct, clear it and jump to the application */
 	if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
+	  JumpToApplication |= true;
+
+	/* If a request has been made to jump to the user application, honor it */
+	if (JumpToApplication)
 	{
 		/* Turn off the watchdog */
 		MCUSR &= ~(1<<WDRF);

Bootloaders/CDC/BootloaderCDC.h

@@ -69,7 +69,7 @@
 		#define SOFTWARE_IDENTIFIER          "LUFACDC"
 
 		/** Magic bootloader key to unlock forced application start mode. */
-		#define MAGIC_BOOT_KEY            0xDC42CACA
+		#define MAGIC_BOOT_KEY               0xDC42
 
 	/* Type Defines: */
 		/** Type define for a non-returning pointer to the start of the loaded application in flash memory. */

Bootloaders/CDC/Descriptors.c

@@ -57,8 +57,8 @@ const USB_Descriptor_Device_t DeviceDescriptor =
 	.ProductID              = 0x204A,
 	.ReleaseNumber          = VERSION_BCD(01.00),
 
-	.ManufacturerStrIndex   = NO_DESCRIPTOR,
-	.ProductStrIndex        = 0x01,
+	.ManufacturerStrIndex   = 0x01,
+	.ProductStrIndex        = 0x02,
 	.SerialNumStrIndex      = NO_DESCRIPTOR,
 
 	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
@@ -185,15 +185,26 @@ const USB_Descriptor_String_t LanguageString =
 	.UnicodeString          = {LANGUAGE_ID_ENG}
 };
 
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+	.UnicodeString          = L"Dean Camera"
+};
+
 /** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
  *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */
 const USB_Descriptor_String_t ProductString =
 {
-	.Header                 = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String},
+	.Header                 = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String},
 
-	.UnicodeString          = L"AVR CDC Bootloader"
+	.UnicodeString          = L"LUFA CDC Bootloader"
 };
 
 /** This function is called by the library when in device mode, and must be overridden (see LUFA library "USB Descriptors"
@@ -228,7 +239,12 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 				Address = &LanguageString;
 				Size    = LanguageString.Header.Size;
 			}
-			else
+			else if (DescriptorNumber == 0x01)
+			{
+				Address = &ManufacturerString;
+				Size    = ManufacturerString.Header.Size;
+			}
+			else if (DescriptorNumber == 0x02)
 			{
 				Address = &ProductString;
 				Size    = ProductString.Header.Size;

Bootloaders/CDC/Doxygen.conf

@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 

Bootloaders/CDC/LUFA CDC Bootloader.inf

@@ -1,78 +1,36 @@
 ;************************************************************
 ; Windows USB CDC ACM Setup File
 ; Copyright (c) 2000 Microsoft Corporation
-
+;************************************************************
 
 [Version]
 Signature="$Windows NT$"
 Class=Ports
 ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
 Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
+DriverVer=7/1/2012,10.0.0.0
 
 [Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
 
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
+[SourceDisksNames]
 
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
+[SourceDisksFiles]
 
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+[DestinationDirs]
+DefaultDestDir=12
 
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
 
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
 
 ;------------------------------------------------------------------------------
 ;  Vendor and Product ID Definitions
@@ -83,24 +41,20 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ; Note: One INF file can be used for multiple devices with different VID and PIDs.
 ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
 ;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
 [DeviceList]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A
 
 [DeviceList.NTamd64]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A
 
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204A
 
 ;------------------------------------------------------------------------------
 ;  String Definitions
 ;------------------------------------------------------------------------------
 ;Modify these strings to customize your device
 ;------------------------------------------------------------------------------
 [Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
 MFGNAME="http://www.lufa-lib.org"
-INSTDISK="LUFA CDC Bootloader Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
+DESCRIPTION="LUFA CDC Class Bootloader"