stm32/boards: Add definition for STM32H747I-DISCO.

Signed-off-by: Andrew Leech <[email protected]>
andrewleech · Sep 19, 2024 · 05d1693 · 05d1693
1 parent aba490d
commit 05d1693
Show file tree

Hide file tree

Showing 2 changed files with 77 additions and 68 deletions.
diff --git a/ports/stm32/boards/STM32H747I-DISCO/mpconfigboard.h b/ports/stm32/boards/STM32H747I-DISCO/mpconfigboard.h
@@ -130,12 +130,12 @@
 #define MICROPY_HW_QSPIFLASH_SIZE_BITS_LOG2 (27)
 // Reserve 1MiB at the end for compatibility with alternate firmware that places WiFi blob here.
 #define MICROPY_HW_SPIFLASH_SIZE_BITS       (120 * 1024 * 1024)
-#define MICROPY_HW_QSPIFLASH_CS             (pyb_pin_QSPI2_CS)
-#define MICROPY_HW_QSPIFLASH_SCK            (pyb_pin_QSPI2_CLK)
-#define MICROPY_HW_QSPIFLASH_IO0            (pyb_pin_QSPI2_D0)
-#define MICROPY_HW_QSPIFLASH_IO1            (pyb_pin_QSPI2_D1)
-#define MICROPY_HW_QSPIFLASH_IO2            (pyb_pin_QSPI2_D2)
-#define MICROPY_HW_QSPIFLASH_IO3            (pyb_pin_QSPI2_D3)
+#define MICROPY_HW_QSPIFLASH_CS             (pyb_pin_QSPI1_CS)
+#define MICROPY_HW_QSPIFLASH_SCK            (pyb_pin_QSPI1_CLK)
+#define MICROPY_HW_QSPIFLASH_IO0            (pyb_pin_QSPI1_D0)
+#define MICROPY_HW_QSPIFLASH_IO1            (pyb_pin_QSPI1_D1)
+#define MICROPY_HW_QSPIFLASH_IO2            (pyb_pin_QSPI1_D2)
+#define MICROPY_HW_QSPIFLASH_IO3            (pyb_pin_QSPI1_D3)
 
 // SPI flash #1, block device config
 extern const struct _mp_spiflash_config_t spiflash_config;
@@ -150,14 +150,14 @@ extern struct _spi_bdev_t spi_bdev;
 #define MICROPY_HW_FLASH_LATENCY    FLASH_LATENCY_2
 
 // UART config
-#define MICROPY_HW_UART1_TX         (pin_A9)
-#define MICROPY_HW_UART1_RX         (pin_A10)
+#define MICROPY_HW_UART1_TX         (pyb_pin_UART1_TX)
+#define MICROPY_HW_UART1_RX         (pyb_pin_UART1_RX)
 #define MICROPY_HW_UART_REPL        PYB_UART_1
 #define MICROPY_HW_UART_REPL_BAUD   115200
 
 // UART config
-#define MICROPY_HW_UART8_TX         (pin_J8)
-#define MICROPY_HW_UART8_RX         (pin_J9)
+#define MICROPY_HW_UART8_TX         (pyb_pin_UART8_TX)
+#define MICROPY_HW_UART8_RX         (pyb_pin_UART8_RX)
 
 // UART7 config
 // #define MICROPY_HW_UART7_TX         (pyb_pin_BT_TXD)
@@ -166,22 +166,22 @@ extern struct _spi_bdev_t spi_bdev;
 // #define MICROPY_HW_UART7_CTS        (pyb_pin_BT_CTS)
 
 // I2C buses
-#define MICROPY_HW_I2C1_SCL         (pin_B6)
-#define MICROPY_HW_I2C1_SDA         (pin_B7)
+// #define MICROPY_HW_I2C1_SCL         (pin_B6)
+// #define MICROPY_HW_I2C1_SDA         (pin_B7)
 
-#define MICROPY_HW_I2C3_SCL         (pin_H7)
-#define MICROPY_HW_I2C3_SDA         (pin_H8)
+// #define MICROPY_HW_I2C3_SCL         (pin_H7)
+// #define MICROPY_HW_I2C3_SDA         (pin_H8)
 
 // SPI buses
-#define MICROPY_HW_SPI1_NSS         (pin_C13)
-#define MICROPY_HW_SPI1_SCK         (pin_B3)
-#define MICROPY_HW_SPI1_MISO        (pin_B4)
-#define MICROPY_HW_SPI1_MOSI        (pin_D7)
+// #define MICROPY_HW_SPI1_NSS         (pin_C13)
+// #define MICROPY_HW_SPI1_SCK         (pin_B3)
+// #define MICROPY_HW_SPI1_MISO        (pin_B4)
+// #define MICROPY_HW_SPI1_MOSI        (pin_D7)
 
-#define MICROPY_HW_SPI2_NSS         (pin_I0)
-#define MICROPY_HW_SPI2_SCK         (pin_I1)
-#define MICROPY_HW_SPI2_MISO        (pin_C2)
-#define MICROPY_HW_SPI2_MOSI        (pin_C3)
+// #define MICROPY_HW_SPI2_NSS         (pin_I0)
+// #define MICROPY_HW_SPI2_SCK         (pin_I1)
+// #define MICROPY_HW_SPI2_MISO        (pin_C2)
+// #define MICROPY_HW_SPI2_MOSI        (pin_C3)
 
 // USRSW is pulled low. Pressing the button makes the input go high.
 #define MICROPY_HW_USRSW_PIN        (pin_C13)
@@ -197,25 +197,25 @@ extern struct _spi_bdev_t spi_bdev;
 #define MICROPY_HW_LED_OFF(pin)     (mp_hal_pin_high(pin))
 
 // SD Card SDMMC
-#define MICROPY_HW_SDCARD_SDMMC     (2)
-#define MICROPY_HW_SDCARD_CK        (pin_D6)
-#define MICROPY_HW_SDCARD_CMD       (pin_D7)
-#define MICROPY_HW_SDCARD_D0        (pin_B14)
-#define MICROPY_HW_SDCARD_D1        (pin_B15)
-#define MICROPY_HW_SDCARD_D2        (pin_B3)
-#define MICROPY_HW_SDCARD_D3        (pin_B4)
-#define MICROPY_HW_SDCARD_MOUNT_AT_BOOT (0)
+// #define MICROPY_HW_SDCARD_SDMMC     (2)
+// #define MICROPY_HW_SDCARD_CK        (pin_D6)
+// #define MICROPY_HW_SDCARD_CMD       (pin_D7)
+// #define MICROPY_HW_SDCARD_D0        (pin_B14)
+// #define MICROPY_HW_SDCARD_D1        (pin_B15)
+// #define MICROPY_HW_SDCARD_D2        (pin_B3)
+// #define MICROPY_HW_SDCARD_D3        (pin_B4)
+// #define MICROPY_HW_SDCARD_MOUNT_AT_BOOT (0)
 
 // FDCAN bus
-#define MICROPY_HW_CAN1_NAME        "FDCAN1"
-#define MICROPY_HW_CAN1_TX          (pin_H13)
-#define MICROPY_HW_CAN1_RX          (pin_B8)
+// #define MICROPY_HW_CAN1_NAME        "FDCAN1"
+// #define MICROPY_HW_CAN1_TX          (pin_H13)
+// #define MICROPY_HW_CAN1_RX          (pin_B8)
 
 // USB config
 #define MICROPY_HW_USB_HS           (1)
-#define MICROPY_HW_USB_HS_ULPI_NXT  (pin_H4)
-#define MICROPY_HW_USB_HS_ULPI_STP  (pin_C0)
-#define MICROPY_HW_USB_HS_ULPI_DIR  (pin_I11)
+#define MICROPY_HW_USB_HS_ULPI_NXT  (pyb_pin_USB_HS_NXT)
+#define MICROPY_HW_USB_HS_ULPI_STP  (pyb_pin_USB_HS_STP)
+#define MICROPY_HW_USB_HS_ULPI_DIR  (pyb_pin_USB_HS_DIR)
 #define MICROPY_HW_USB_HS_ULPI3320  (1)
 
 #define MICROPY_HW_USB_CDC_RX_DATA_SIZE     (1024)
@@ -227,7 +227,7 @@ extern struct _spi_bdev_t spi_bdev;
 // SDRAM TODO update to: 8M x 32bit SDRAM is connected to SDRAM Bank1 of the STM32H747XIH6 FMC
 #define MICROPY_HW_SDRAM_SIZE               (256 * 1024 * 1024 / 8)  // 256 Mbit
 #define MICROPY_HW_SDRAM_STARTUP_TEST       (1)
-#define MICROPY_HW_SDRAM_TEST_FAIL_ON_ERROR (true)
+#define MICROPY_HW_SDRAM_TEST_FAIL_ON_ERROR (false)
 // #define MICROPY_HW_FMC_SWAP_BANKS           (1)
 
 // Timing configuration for 200MHz/2=100MHz (10ns)
@@ -326,15 +326,15 @@ extern struct _spi_bdev_t spi_bdev;
 #define MICROPY_HW_FMC_D31          (pin_I10)
 
 // Ethernet via RMII
-#define MICROPY_HW_ETH_MDC          (pin_C1)
-#define MICROPY_HW_ETH_MDIO         (pin_A2)
-#define MICROPY_HW_ETH_RMII_REF_CLK (pin_A1)
-#define MICROPY_HW_ETH_RMII_CRS_DV  (pin_A7)
-#define MICROPY_HW_ETH_RMII_RXD0    (pin_C4)
-#define MICROPY_HW_ETH_RMII_RXD1    (pin_C5)
-#define MICROPY_HW_ETH_RMII_TX_EN   (pin_G11)
-#define MICROPY_HW_ETH_RMII_TXD0    (pin_G13)
-#define MICROPY_HW_ETH_RMII_TXD1    (pin_G12)
+#define MICROPY_HW_ETH_MDC          (pyb_pin_ETH_MDC)
+#define MICROPY_HW_ETH_MDIO         (pyb_pin_ETH_MDIO)
+#define MICROPY_HW_ETH_RMII_REF_CLK (pyb_pin_ETH_RMII_REF_CLK)
+#define MICROPY_HW_ETH_RMII_CRS_DV  (pyb_pin_ETH_RMII_CRS_DV)
+#define MICROPY_HW_ETH_RMII_RXD0    (pyb_pin_ETH_RMII_RXD0)
+#define MICROPY_HW_ETH_RMII_RXD1    (pyb_pin_ETH_RMII_RXD1)
+#define MICROPY_HW_ETH_RMII_TX_EN   (pyb_pin_ETH_RMII_TX_EN)
+#define MICROPY_HW_ETH_RMII_TXD0    (pyb_pin_ETH_RMII_TXD0)
+#define MICROPY_HW_ETH_RMII_TXD1    (pyb_pin_ETH_RMII_TXD1)
 
 // #define MICROPY_HW_USB_VID                      0x2341
 // #define MICROPY_HW_USB_PID                      0x055B

diff --git a/ports/stm32/boards/STM32H747I-DISCO/pins.csv b/ports/stm32/boards/STM32H747I-DISCO/pins.csv
@@ -198,13 +198,15 @@ A7,PA6
 
 UART1_TX,PA9
 UART1_RX,PA10
-UART4_TX,PA0
-UART4_RX,PI9
-UART6_TX,PG14
-UART6_RX,PG9
+
+#UART4_TX,PA0
+#UART4_RX,PI9
+#UART6_TX,PG14
+#UART6_RX,PG9
+
 UART8_TX,PJ8
 UART8_RX,PJ9
--ETH_RST,PJ15
+
 -ETH_RMII_REF_CLK,PA1
 -ETH_MDIO,-PA2
 -ETH_RMII_CRS_DV,-PA7
@@ -214,6 +216,7 @@ UART8_RX,PJ9
 -ETH_RMII_TX_EN,PG11
 -ETH_RMII_TXD0,PG13
 -ETH_RMII_TXD1,PG12
+
 -USB_HS_CLK,-PA5
 -USB_HS_STP,-PC0
 -USB_HS_NXT,-PH4
@@ -226,24 +229,30 @@ UART8_RX,PJ9
 -USB_HS_D5,PB12
 -USB_HS_D6,PB13
 -USB_HS_D7,PB5
--USB_HS_RST,PJ4
--USB_DM,PA11
--USB_DP,PA12
+
+
 #BOOT0,BOOT0
-OSCEN,PH1
-DAC1,PA4
-DAC2,-PA5
-I2C1_SDA,PB7
-I2C1_SCL,PB6
-I2C3_SDA,PH8
-I2C3_SCL,PH7
--QSPI2_CS,PG6
--QSPI2_CLK,-PF10
--QSPI2_D0,PD11
--QSPI2_D1,PD12
--QSPI2_D2,-PF7
--QSPI2_D3,PD13
--SE05X_EN,-PI12
+
+# DAC1,PA4
+# DAC2,-PA5
+# I2C1_SDA,PB7
+# I2C1_SCL,PB6
+# I2C3_SDA,PH8
+# I2C3_SCL,PH7
+
+-QSPI1_CS,PG6
+-QSPI1_CLK,PB2
+-QSPI1_D0,PD11
+-QSPI1_D1,PF9
+-QSPI1_D2,PF7
+-QSPI1_D3,PF6
+
+-QSPI2_D0,PH2
+-QSPI2_D1,PH3
+-QSPI2_D2,PG9
+-QSPI2_D3,PG14
+
+
 
 LEDR,PI12
 LEDG,PI13