ports/esp32: Add automatic bootloader handling for S2 and S3.

Enables support for the ESP standard DTR/RTS based reboot to bootloader. Switches from OTG to Serial/Jtag mode to workaround issue discussed in: espressif/arduino-esp32#6762 Signed-off-by: Andrew Leech <[email protected]>
andrewleech · Jun 7, 2024 · 352fc95 · 352fc95
1 parent caf38b8
commit 352fc95
Show file tree

Hide file tree

Showing 17 changed files with 55 additions and 15 deletions.
diff --git a/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board b/ports/esp32/boards/ESP32_GENERIC_S3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y

diff --git a/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS2/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_SPIRAM_MEMTEST=
 

diff --git a/ports/esp32/boards/UM_FEATHERS2NEO/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS2NEO/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 # LWIP
 CONFIG_LWIP_LOCAL_HOSTNAME="UMFeatherS2Neo"

diff --git a/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board b/ports/esp32/boards/UM_FEATHERS3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=

diff --git a/ports/esp32/boards/UM_NANOS3/sdkconfig.board b/ports/esp32/boards/UM_NANOS3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y

diff --git a/ports/esp32/boards/UM_PROS3/sdkconfig.board b/ports/esp32/boards/UM_PROS3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=

diff --git a/ports/esp32/boards/UM_TINYS2/sdkconfig.board b/ports/esp32/boards/UM_TINYS2/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 # LWIP
 CONFIG_LWIP_LOCAL_HOSTNAME="UMTinyS2"

diff --git a/ports/esp32/boards/UM_TINYS3/sdkconfig.board b/ports/esp32/boards/UM_TINYS3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y

diff --git a/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board b/ports/esp32/boards/UM_TINYWATCHS3/sdkconfig.board
@@ -1,6 +1,5 @@
 CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
-CONFIG_ESPTOOLPY_AFTER_NORESET=y
 
 CONFIG_ESPTOOLPY_FLASHSIZE_4MB=
 CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y

diff --git a/ports/esp32/modmachine.c b/ports/esp32/modmachine.c
@@ -222,8 +222,25 @@ static mp_int_t mp_machine_reset_cause(void) {
 
 #if MICROPY_ESP32_USE_BOOTLOADER_RTC
 #include "soc/rtc_cntl_reg.h"
+#include "usb.h"
+#if CONFIG_IDF_TARGET_ESP32S2
+#include "esp32s2/rom/usb/usb_dc.h"
+#include "esp32s2/rom/usb/usb_persist.h"
+#include "esp32s2/rom/usb/chip_usb_dw_wrapper.h"
+#elif CONFIG_IDF_TARGET_ESP32S3
+#include "esp32s3/rom/usb/usb_dc.h"
+#include "esp32s3/rom/usb/usb_persist.h"
+#include "esp32s3/rom/usb/chip_usb_dw_wrapper.h"
+#endif
+
 NORETURN static void machine_bootloader_rtc(void) {
+    #if CONFIG_IDF_TARGET_ESP32S3
+    usb_usj_mode();
+    #endif
+    usb_dc_prepare_persist();
+    chip_usb_set_persist_flags(USBDC_BOOT_DFU);
     REG_WRITE(RTC_CNTL_OPTION1_REG, RTC_CNTL_FORCE_DOWNLOAD_BOOT);
+    mp_hal_delay_ms(100);
     esp_restart();
 }
 #endif

diff --git a/ports/esp32/mpconfigport.h b/ports/esp32/mpconfigport.h
@@ -205,6 +205,7 @@
 
 #if MICROPY_HW_ENABLE_USBDEV
 #define MICROPY_SCHEDULER_STATIC_NODES      (1)
+#define MICROPY_HW_ESP_AUTOMATIC_BOOTLOADER (1)
 
 // Enable USB-CDC serial port
 #ifndef MICROPY_HW_USB_CDC
@@ -291,7 +292,7 @@ void *esp_native_code_commit(void *, size_t, void *);
         extern void mp_handle_pending(bool); \
         mp_handle_pending(true); \
         MICROPY_PY_SOCKET_EVENTS_HANDLER \
-        MICROPY_HW_USBDEV_TASK_HOOK \
+            MICROPY_HW_USBDEV_TASK_HOOK \
         asm ("waiti 0"); \
     } while (0);
 #endif

diff --git a/ports/esp32/usb.c b/ports/esp32/usb.c
@@ -81,6 +81,18 @@ void usb_init(void) {
 
 }
 
+#if CONFIG_IDF_TARGET_ESP32S3
+void usb_usj_mode(void) {
+    // Switch the USB PHY back to Serial/Jtag mode, disabling OTG support
+    // This should be run before jumping to bootloader.
+    usb_del_phy(phy_hdl);
+    usb_phy_config_t phy_conf = {
+        .controller = USB_PHY_CTRL_SERIAL_JTAG,
+    };
+    usb_new_phy(&phy_conf, &phy_hdl);
+}
+#endif
+
 void mp_usbd_port_get_serial_number(char *serial_buf) {
     // use factory default MAC as serial ID
     uint8_t mac[8];

diff --git a/ports/esp32/usb.h b/ports/esp32/usb.h
@@ -29,5 +29,6 @@
 #define MICROPY_HW_USB_CDC_TX_TIMEOUT_MS (500)
 
 void usb_init(void);
+void usb_usj_mode(void);
 
 #endif // MICROPY_INCLUDED_ESP32_USB_H
diff --git a/ports/renesas-ra/README.md b/ports/renesas-ra/README.md
@@ -43,7 +43,7 @@ when invoking `make`.
 * Protocol buffer compiler
 Building for the `ARDUINO_PORTENTA_C33` board will build the `esp_hosted` driver, that depends
 on the Protocol Buffer Compiler being installed. On Debian/Ubuntu, this can be installed with
-`sudo apt-get install protobuf-compiler`.
+`sudo apt-get install protobuf-c-compiler`.
 
 * Obtain submodules
 First the submodules must be obtained using:

diff --git a/ports/renesas-ra/boards/EK_RA4W1/mpconfigboard.h b/ports/renesas-ra/boards/EK_RA4W1/mpconfigboard.h
@@ -19,7 +19,7 @@
 #define MICROPY_HW_ENABLE_ADC       (1)
 #define MICROPY_HW_HAS_FLASH        (1)
 #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
-
+#define MICROPY_HW_ENABLE_USBDEV  (0)
 // board config
 
 // UART

diff --git a/ports/renesas-ra/main.c b/ports/renesas-ra/main.c
@@ -36,7 +36,6 @@
 #include "shared/readline/readline.h"
 #include "shared/runtime/pyexec.h"
 #include "shared/runtime/softtimer.h"
-#include "shared/tinyusb/mp_usbd.h"
 #include "lib/oofatfs/ff.h"
 #include "lib/littlefs/lfs1.h"
 #include "lib/littlefs/lfs1_util.h"

diff --git a/shared/tinyusb/mp_usbd_cdc.c b/shared/tinyusb/mp_usbd_cdc.c
@@ -135,9 +135,12 @@ void tud_sof_cb(uint32_t frame_count) {
 
 #endif
 
-#if MICROPY_HW_ENABLE_USBDEV && (MICROPY_HW_USB_CDC_1200BPS_TOUCH || MICROPY_HW_USB_CDC)
+#if MICROPY_HW_ENABLE_USBDEV && ( \
+    MICROPY_HW_USB_CDC_1200BPS_TOUCH || \
+    MICROPY_HW_USB_CDC || \
+    MICROPY_HW_ESP_AUTOMATIC_BOOTLOADER)
 
-#if MICROPY_HW_USB_CDC_1200BPS_TOUCH
+#if MICROPY_HW_USB_CDC_1200BPS_TOUCH || MICROPY_HW_ESP_AUTOMATIC_BOOTLOADER
 static mp_sched_node_t mp_bootloader_sched_node;
 
 static void usbd_cdc_run_bootloader_task(mp_sched_node_t *node) {
@@ -146,6 +149,13 @@ static void usbd_cdc_run_bootloader_task(mp_sched_node_t *node) {
 }
 #endif
 
+#if MICROPY_HW_ESP_AUTOMATIC_BOOTLOADER
+static struct {
+    bool dtr : 1;
+    bool rts : 1;
+} prev_line_state = {0};
+#endif
+
 void
 #if MICROPY_HW_USB_EXTERNAL_TINYUSB
 mp_usbd_line_state_cb
@@ -162,6 +172,15 @@ tud_cdc_line_state_cb
         tud_sof_cb_enable(true);
     }
     #endif
+    #if MICROPY_HW_ESP_AUTOMATIC_BOOTLOADER
+    if (dtr && !rts) {
+        if (prev_line_state.rts && !prev_line_state.dtr) {
+            mp_sched_schedule_node(&mp_bootloader_sched_node, usbd_cdc_run_bootloader_task);
+        }
+    }
+    prev_line_state.rts = rts;
+    prev_line_state.dtr = dtr;
+    #endif
     #if MICROPY_HW_USB_CDC_1200BPS_TOUCH
     if (dtr == false && rts == false) {
         // Device is disconnected.