KU-Cambium-e400-setup-guide

default ip: 192.168.0.1 default username and password: admin

1. Setting up the router

Configure->System

Set Name: KUCC

Set Country-Code: China or India (Closest to Nepal)

Configure->Network->VLAN

Add new L3 Interface (VLAN) if not created already.

VLAN 1 is the Default VLAN

Static IP: 192.168.xx.xx ( Provided by ISMS.)

Network Mask: 255.255.255.0

Configure->Network->DHCP

Create DHCP Pool

Set address range: 192.168.1.10 - 192.168.1.254 ( This can be of your choice)

Default router IP: 192.168.1.1 ( You can use this to access the router)

DNS Address: 101.251.6.5 (This is KU's DNS) and 1.1.1.1 (Domain name for client)

Network: 192.168.1.0 and 255.255.255.0 (Subnet number and mask of DHCP address pool)

Configure->Network->VLAN

Default Gateway: 192.168.25.1

DNS Server 1: 101.251.6.5 (Again KU's DNS)

DNS Server 2: 1.1.1.1

Configure->Network->VLAN

Create VLAN 2

Static IP: 192.168.1.1

Network Mask: 255.255.255.0

NAT: "checked"

Default Gateway: 192.168.25.1

DNS Server 1: 101.251.6.5 (Again KU's DNS)

DNS Server 2: 1.1.1.1

Configure->Network->WLAN

Add WLAN

Mesh: Off

SSIS: KUCC

VLAN: 2 (The one we created earlier)

Security: WAP2 Pre-shared Keys

Passphrase: your password here

Radio: 2.5GHz and 5GHz(You can create two different WLAN for 2.5GHz and 5GHz)

And that's it. You are ready to rock and roll.

2. Reset

    Press and hold "Reset button" for 10 seconds.
   
    Connect Router to PoE and then PoE(LAN) to Computer
   
    Go to Network and Sharing center->LAN Properties->Properties->Internet Protocol Version 4->Use the following address
   
    IP address: 192.168.xx.xx or 192.168.25.1 or 192.168.1.1
   
    Subnet Mask: 255.255.255.0
   
    Default gateway: 192.168.25.1
   
    DNS: 1.1.1.1
   

Now you should be able to access the router from browser and follow Setting up the router above.