Appium Flutter Driver

Appium Flutter Driver is a test automation tool for Flutter apps on multiple platforms/OSes. Appium Flutter Driver is part of the Appium mobile test automation tool maintained by the community. Feel free to create PRs to fix issues/improve this driver.

Flutter Driver vs Appium Flutter Driver

Even though Flutter comes with superb integration test support, Flutter Driver, it does not fit some specific use cases, such as

• Writing tests in other languages than Dart
• Running integration test for Flutter app with embedded webview or native view, or existing native app with embedded Flutter view
• Running tests on multiple devices simultaneously
• Running integration tests on device farms that offer Appium support (Please contact the availability for each vendor)

Under the hood, Appium Flutter Driver uses the Dart VM Service Protocol with extension ext.flutter.driver, similar to Flutter Driver, to control the Flutter app-under-test (AUT).

Appium drivers for Flutter

Appium community currently has two drivers for Flutter environment:

• Appium Flutter driver (this driver)
  • Run Flutter commands over websocekt connection against the observaory URL (calls Flutter APIs directly)
  • Base APIs are flutter_driver
• Appium Flutter Integration Driver
  • Run a server on DartVM as part of the application under test in order to call Flutter APIs via the server
  • Base APIs are integration_test

Appium Flutter Driver or Appium UiAutomator2/XCUITest driver

As a baseline, we recommend using official testing tools and strategy to test Flutter apps as possible in Dart.

If you'd like to test a release app, whcih can be released from app store as-is, Appium UIAutomator2/XCUITest driver is a good choice. Since Flutter 3.19, Flutter apps can expose identifier for SemanticsProperties as resource-id in Android and accessibilityIdentifier in iOS. They should help to achieve automation against release apps with Appium UIAutomator2/XCUITest as blackbox testing.

• Appium Flutter driver has three contexts to manage the application under test and the device under test. To achieve the FLUTTER context, the test package requires testing tools to import. The application under test cannot release as-is.
  • FLUTTER context sends commands to the Dart VM directly over the observatory URL. This allows you to interact with Flutter elements directly.
  • NATIVE_APP context is the same as the regular Appium UIAutomator2/XCUITest driver
  • WEBVIEW context manages the WebView contents over Appium UiAutomator2/XCUITest driver
• (Recommended if possible) Appium UIAutomator2/XCUITest driver directly must be sufficient to achieve automation if the application under test had semanticLabel properly. Then, the accessibility mechanism in each OS can expose elements for Appium through OS's accessibility features.
  • In addition to semanticLabel, Flutter 3.19+ may have identifier for SemanticsProperties (introduced by flutter/flutter#138331). It sets resource-id and accessibilityIdentifier for Android and iOS, then UiAutomator2/XCUITest drivers might also be able to interact with these elements without Appium Flutter Driver.
    • "appium:settings[disableIdLocatorAutocompletion]": true or configuring disableIdLocatorAutocompletion via Settings API would be necessary to make resource-id idea work without any package name prefix like Android compose.
    • e.g. flutter/flutter#17988 (comment)

Installation

Appium Flutter Driver version 1.0 and higher require Appium 2.0.

appium driver install --source=npm appium-flutter-driver

As a local:

appium driver install --source local /path/to/appium-flutter-driver/driver

Usage and requirement

If you are unfamiliar with running Appium tests, start with Quickstart Intro first.

Your Flutter application must be compiled in debug or profile mode. The dependency must have flutter_driver package like the below pubspec.yaml example with enableFlutterDriverExtension configuration in the main.dart.

# pubspec.yaml
dev_dependencies:
  flutter_driver:
    sdk: flutter

This snippet, taken from example directory, is a script written as an appium client with webdriverio, and assumes you have appium server (with appium-flutter-driver installed) running on the same host and default port (4723). For more info, see example's README.md

Note

This means this driver depends on flutter_driver. In the past, the Flutter team announced replacing flutter_driver with integration_test, but according to this ticket, this discussion is still ongoing. So flutter_driver would continue to be maintained for now.

Each client needs each finder module to handle Finders. Appium Flutter Driver communicates with the Dart VM directory in the FLUTTER context.

Doctor

Since driver version 2.4.0 you can automate the validation for the most of the above requirements as well as various optional ones needed by driver extensions by running the appium driver doctor flutter server command. The check runs for Android for UIAutomator2 driver and iOS for XCUITest driver.

SKIP_ANDROID or SKIP_IOS environment variable helps to skip these checks.

# skip Android check
SKIP_ANDROID=1 appium driver doctor flutter
# skip iOS check
SKIP_IOS=1 appium driver doctor flutter

Note

• Flutter context does not support page source
  • Please use getRenderTree command instead
• You can send appium-xcuitest-driver/appium-uiautomator2-driver commands in NATIVE_APP context
• scrollUntilVisible command : An expectation for checking that an element, known to be present on the widget tree, is visible. Using waitFor to wait element
• scrollUntilTapable command : An expectation for checking an element is visible and enabled such that you can click it. Using waitTapable to wait element
• driver.activateApp(appId) starts the given app and attaches to the observatory URL in the FLUTTER context. The method may raise an exception if no observaotry URL was found. The typical case is the appId is already running. Then, the driver will fail to find the observatory URL.
• getClipboard and setClipboard depend on each NATIVE_APP context behavior
• Launch via flutter:launchApp or 3rd party tool (via instrument service) and attach to the Dart VM for an iOS real device (profile build)
  1. Do not set app nor bundleId to start a session without launching apps
  2. Start the app process via 3rd party tools such as go-ios to start the app process with debug mode in the middle of the new session process in 1) the above.
     • Then, the appium flutter session establish the WebSocket and proceed the session
• keyboard interaction may not work in Android because of flutter/flutter#15415 that is caused by flutter_driver

Capabilities

For the Appium Flutter Driver only

Capability	Description	Example Values
appium:retryBackoffTime	The interval to find the observetory url from logs. (default 3000ms)	500
appium:maxRetryCount	The count to find the observatory url. (default 10)	20
appium:observatoryWsUri	The URL to attach to the Dart VM. The Appium Flutter Driver finds the WebSocket URL from the device log by default. You can skip the finding the URL process by specifying this capability. Then, this driver attempt to establish a WebSocket connection against the given WebSocket URL. Note that this capability expects the URL is ready for access by outside an appium session. This flutter driver does not do port-forwarding with this capability. You may need to coordinate the port-forwarding as well.	'ws://127.0.0.1:60992/aaaaaaaaaaa=/ws'
appium:isolateId	The isolate id to attach to as the initial attempt. A session can change the isolate with flutter:setIsolateId command. The default behavior finds main isolate id and attaches it.	isolates/2978358234363215, 2978358234363215
appium:skipPortForward	Whether skip port forwarding from the flutter driver local to the device under test with observatoryWsUri capability. It helps you to manage the application under test, the observatory URL and the port forwarding configuration. The default is true.	true, false
appium:remoteAdbHost	The IP/hostname of the remote host ADB is running on. This capability only makes sense for Android platform. Providing it will implicitly override the host for the Observatory URL if the latter is determined from device logs. localhost be default	192.168.1.20
appium:adbPort	The port number ADB server is running on. This capability only makes sense for Android platform. 5037 by default	9999
appium:forwardingPort	The port number that will be used to forward the traffic from the device under test to locahost. Only applicable if skipPortForward is falsy. Not applicable if the test is executed on iOS Simulator. By default, it is the same as in the provided or autodetected Observatory URL.	9999

UIA2/XCUITest driver

Please check each driver's documentation

• https://github.com/appium/appium-uiautomator2-driver
• https://appium.github.io/appium-xcuitest-driver/latest/capabilities/

Context Management

Appium Flutter Driver allows you to send flutter_driver commands to the Dart VM in the FLUTTER context, but it does not support native Android/iOS since the Dart VM can handle in the Dart VM contents. NATIVE_APP context provides you to use the UIA2 driver for Android and the XCUITest driver for iOS automation. WEBVIEW_XXXX context helps WebView testing over the UIA2/XCUITest driver that is not available via the flutter_driver.

Thus, you need to switch proper contexts, FLUTTER, NATIVE_APP or WEBVIEW_XXXX, to automate a proper application target.

Example

# webdriverio
const wdio = require('webdriverio');
const assert = require('assert');
const { byValueKey } = require('appium-flutter-finder');

const osSpecificOps = process.env.APPIUM_OS === 'android' ? {
  'platformName': 'Android',
  'appium:deviceName': 'Pixel 2',
  'appium:app': __dirname +  '/../apps/app-free-debug.apk',
}: process.env.APPIUM_OS === 'ios' ? {
  'platformName': 'iOS',
  'appium:platformVersion': '12.2',
  'appium:deviceName': 'iPhone X',
  'appium:noReset': true,
  'appium:app': __dirname +  '/../apps/Runner.zip',
} : {};

const opts = {
  port: 4723,
  capabilities: {
    ...osSpecificOps,
    'appium:automationName': 'Flutter',
    'appium:retryBackoffTime': 500
  }
};

(async () => {
  const counterTextFinder = byValueKey('counter');
  const buttonFinder = byValueKey('increment');

  const driver = await wdio.remote(opts);

  if (process.env.APPIUM_OS === 'android') {
    await driver.switchContext('NATIVE_APP');
    await (await driver.$('~fab')).click();
    await driver.switchContext('FLUTTER');
  } else {
    console.log('Switching context to `NATIVE_APP` is currently only applicable to Android demo app.')
  }

  assert.strictEqual(await driver.getElementText(counterTextFinder), '0');

  await driver.elementClick(buttonFinder);
  await driver.touchAction({
    action: 'tap',
    element: { elementId: buttonFinder }
  });

  assert.strictEqual(await driver.getElementText(counterTextFinder), '2');

  driver.deleteSession();
})();

Please check example in this repository for more languages.

Several ways to start an application

You have a couple of methods to start the application under test by establishing the Dart VM connection as below:

1. Start with app in the capabilities
   1. The most standard method. You may need to start a new session with app capability. Then, appium-flutter-driver will start the app, and establish a connection with the Dart VM immediately.
2. Start with activate_app: for users who want to start the application under test in the middle of a session
   1. Start a session without app capability
   2. Install the application under test via driver.install_app or mobile:installApp command
   3. Activate the app via driver.activate_app or mobile:activateApp command
      • Then, appium-flutter-driver establish a connection with the Dart VM
3. Launch the app outside the driver: for users who want to manage the application under test by yourselves
   1. Start a session without app capability
   2. Install the application under test via driver.install_app or mobile:installApp command etc
   3. Calls flutter:connectObservatoryWsUrl command to keep finding an observatory URL to the Dart VM
   4. (at the same time) Launch the application under test via outside the appium-flutter-driver
      • e.g. Launch an iOS process via ios-go, iproxy or tidevice
   5. Once flutter:connectObservatoryWsUrl identify the observatory URL, the command will establish a connection to the Dart VM
4. Launch the app with flutter:launchApp for iOS and attach to the Dart VM: for users whom application under test do not print the observatory url via regular launch/activate app method
   1. Start a session without app capability
   2. Install the application under test via driver.install_app or mobile:installApp command etc
   3. Calls flutter:launchApp command to start an iOS app via instrument service
      • driver.execute_script 'flutter:launchApp', 'com.example.bundleId', {arguments: ['arg1'], environment: {ENV1: 'env'}} is example usage
      • This launching method is the same as the above 3rd party method, but does the same thing only via the appium flutter driver.

Please make sure the target app process stops before starting the target app with the above.

Changelog

• appium-flutter-driver
• each finder

Commands for NATIVE_APP/WEBVIEW context

Please check each driver's documentation

• https://github.com/appium/appium-uiautomator2-driver
• https://appium.github.io/appium-xcuitest-driver/latest

Commands for FLUTTER context

Legend:

Icon	Description
✅	integrated to CI
🆗	manual tested without CI
⚠️	available without manual tested
❌	unavailable

Finders

Flutter Driver API	Status	WebDriver example
ancestor	🆗
bySemanticsLabel	🆗
byTooltip	🆗	byTooltip('Increment')
byType	🆗	byType('TextField')
byValueKey	🆗	byValueKey('counter')
descendant	🆗
pageBack	🆗	pageBack()
text	🆗	byText('foo')

Commands

The below WebDriver example is by webdriverio. flutter: prefix commands are mobile: command in appium for Android and iOS. Please replace them properly with your client.

Flutter API	Status	WebDriver example (JavaScript, webdriverio)	Scope
FlutterDriver.connectedTo	🆗	wdio.remote(opts)	Session
checkHealth	🆗	driver.execute('flutter:checkHealth')	Session
clearTextbox	🆗	driver.elementClear(find.byType('TextField'))	Session
clearTimeline	🆗	driver.execute('flutter:clearTimeline')	Session
enterText	🆗	driver.elementSendKeys(find.byType('TextField'), 'I can enter text') (no focus required) driver.elementClick(find.byType('TextField')); driver.execute('flutter:enterText', 'I can enter text') (focus required by tap/click first)	Session
forceGC	🆗	driver.execute('flutter:forceGC')	Session
getBottomLeft	🆗	driver.execute('flutter:getBottomLeft', buttonFinder)	Widget
getBottomRight	🆗	driver.execute('flutter:getBottomRight', buttonFinder)	Widget
getCenter	🆗	driver.execute('flutter:getCenter', buttonFinder)	Widget
getRenderObjectDiagnostics	🆗	driver.execute('flutter:getRenderObjectDiagnostics', counterTextFinder, { includeProperties: true, subtreeDepth: 2 })	Widget
getWidgetDiagnostics	🆗 (v2.8.0+)	driver.execute('flutter:getWidgetDiagnostics', counterTextFinder, { includeProperties: true, subtreeDepth: 2 })	Widget
getRenderTree	🆗	driver.execute('flutter: getRenderTree')	Session
getSemanticsId	🆗	driver.execute('flutter:getSemanticsId', counterTextFinder)	Widget
getText	🆗	driver.getElementText(counterTextFinder)	Widget
getTopLeft	🆗	driver.execute('flutter:getTopLeft', buttonFinder)	Widget
getTopRight	🆗	driver.execute('flutter:getTopRight', buttonFinder)	Widget
getVmFlags	❌		Session
requestData	🆗	driver.execute('flutter:requestData', json.dumps({"deepLink": "myapp://item/id1"}))	Session
runUnsynchronized	❌		Session
setFrameSync	🆗	driver.execute('flutter:setFrameSync', bool , durationMilliseconds)	Session
screenshot	🆗	driver.takeScreenshot()	Session
screenshot	🆗	driver.saveScreenshot('a.png')	Session
scroll	🆗	driver.execute('flutter:scroll', find.byType('ListView'), {dx: 50, dy: -100, durationMilliseconds: 200, frequency: 30})	Widget
scrollIntoView	🆗	driver.execute('flutter:scrollIntoView', find.byType('TextField'), {alignment: 0.1}) driver.execute('flutter:scrollIntoView', find.byType('TextField'), {alignment: 0.1, timeout: 30000})	Widget
scrollUntilVisible	🆗	driver.execute('flutter:scrollUntilVisible', find.byType('ListView'), {item:find.byType('TextField'), dxScroll: 90, dyScroll: -400});, driver.execute('flutter:scrollUntilVisible', find.byType('ListView'), {item:find.byType('TextField'), dxScroll: 90, dyScroll: -400, waitTimeoutMilliseconds: 20000});	Widget
scrollUntilTapable	🆗	driver.execute('flutter:scrollUntilTapable', find.byType('ListView'), {item:find.byType('TextField'), dxScroll: 90, dyScroll: -400});, driver.execute('flutter:scrollUntilTapable', find.byType('ListView'), {item:find.byType('TextField'), dxScroll: 90, dyScroll: -400, waitTimeoutMilliseconds: 20000});	Widget
setSemantics	❌		Session
setTextEntryEmulation	🆗	driver.execute('flutter:setTextEntryEmulation', false)	Session
startTracing	❌		Session
stopTracingAndDownloadTimeline	❌		Session
tap	🆗	driver.elementClick(buttonFinder)	Widget
tap	🆗	driver.touchAction({action: 'tap', element: {elementId: buttonFinder}})	Widget
tap	🆗	driver.execute('flutter:clickElement', buttonFinder, {timeout:5000})	Widget
traceAction	❌		Session
waitFor	🆗	driver.execute('flutter:waitFor', buttonFinder, 100)	Widget
waitForAbsent	🆗	driver.execute('flutter:waitForAbsent', buttonFinder)	Widget
waitForTappable	🆗	driver.execute('flutter:waitForTappable', buttonFinder)	Widget
waitUntilNoTransientCallbacks	❌		Widget
-	🆗	driver.execute('flutter:getVMInfo')	System
-	🆗	driver.execute('flutter:setIsolateId', 'isolates/2978358234363215')	System
-	🆗	driver.execute('flutter:getIsolate', 'isolates/2978358234363215') or driver.execute('flutter:getIsolate')	System
❓	🆗	driver.execute('flutter:longTap', find.byValueKey('increment'), {durationMilliseconds: 10000, frequency: 30})	Widget
❓	🆗	driver.execute('flutter:waitForFirstFrame')	Widget
-	🆗	(Ruby) driver.execute_script 'flutter:connectObservatoryWsUrl'	Flutter Driver
-	🆗	(Ruby) driver.execute_script 'flutter:launchApp', 'bundleId', {arguments: ['arg1'], environment: {ENV1: 'env'}}	Flutter Driver
dragAndDropWithCommandExtension	🆗	(Python) driver.execute_script('flutter:dragAndDropWithCommandExtension', payload)	Command Extension

NOTE

flutter:launchApp launches an app via instrument service. mobile:activateApp and driver.activate_app are via XCTest API. They are a bit different.

isolate handling

Change the flutter engine attache to

1. Get available isolate ids
   • id key in the value of isolates by flutter:getVMInfo
2. Set the id via setIsolateId

# ruby
info = driver.execute_script 'flutter:getVMInfo'
# Change the target engine to "info['isolates'][0]['id']"
driver.execute_script 'flutter:setIsolateId', info['isolates'][0]['id']

Check current isolate, or a particular isolate

1. Get available isolates
   • driver.execute('flutter:getVMInfo').isolates (JS)
2. Get a particular isolate or current isolate
   • Current isolate: driver.execute('flutter:getIsolate') (JS)
   • Particular isolate: driver.execute('flutter:getIsolate', 'isolates/2978358234363215') (JS)

Commands across contexts

These Appium commands can work across context

• deleteSession
• setContext
• getCurrentContext
• getContexts
• activateApp('appId')/mobile:activateApp
  • mobile:activateApp has skipAttachObservatoryUrl key to not try to attach to an observatory url. e.g. driver.execute_script 'mobile:activateApp', {skipAttachObservatoryUrl: true, appId: 'com.android.chrome'}
• terminateApp('appId')/mobile:terminateApp
• installApp(appPath, options)
• getClipboard
• setClipboard

Command Extension (Flutter Driver)

This is a command extension for Flutter Driver, utilizing the CommandExtension-class within ext.flutter.driver

Available commands:

• dragAndDropWithCommandExtension – performs a drag-and-drop action on the screen by specifying the start and end coordinates and the action duration.

How to use

Copy the extended_commands.dart file to the lib folder of your Flutter project.

The entry point must include the List<CommandExtension>? commands argument in either main.dart or test_main.dart to properly handle the command extension.

import 'extended_commands.dart';


void main() {
  enableFlutterDriverExtension(
      commands: [DragCommandExtension()]);
  runApp(const MyApp());
}

Simple example using dragAndDropWithCommandExtension command in Python

# python
coord_item_1 = driver.execute_script("flutter:getCenter", item_1)
coord_item_2 = driver.execute_script("flutter:getCenter", item_2)
start_x = coord_item_1["dx"]
start_y = coord_item_1["dy"]
end_y = coord_item_2["dy"]

payload = {
    "startX": start_x,
    "startY": start_y,
    "endX": "0",
    "endY": end_y,
    "duration": "15000" # minimum 15000ms needed to drag n drop
}

driver.execute_script("flutter:dragAndDropWithCommandExtension", payload)

For debugging or testing in other programming languages, you can use the APK available in this repository or build an IPA.

Troubleshooting

• Input texts #417
• Looks hanging in click #181 (comment)
  • flutter:setFrameSync may help
• flutter:waitFor would help to handle "an element does not exist/is not enabled" behavior. exmaple issue
• Appium Inspector does not work with FLUTTER context

TODO?

• switching context between Flutter and AndroidView
• switching context between Flutter and UiKitView
• Web: FLUTTER_WEB context?
• macOS: with https://github.com/appium/appium-mac2-driver
• Windws?
• Linux?

Release appium-flutter-driver

$ cd driver
$ sh release.sh
$ npm version <major|minor|patch>
# update changelog
$ git commit -am 'chore: bump version'
$ git tag <version number> # e.g. git tag v0.0.32
$ git push origin v0.0.32
$ git push origin main
$ npm publish

Java implementation

• https://github.com/appium/appium-flutter-driver/tree/main/finder/kotlin via jitpack
• https://github.com/ashwithpoojary98/javaflutterfinder
• https://github.com/5v1988/appium-flutter-client