I created a simple case (body + lid) for Hoermann HCP Bridge based on the project https://github.com/Gifford47/HCPBridgeMqtt.
Due weak WiFi signal I needed to place the HCP Bridge out of Hoermann SupraMatic/ProMatic case. My HCP Bridge is connected to the Hoermann motor with 5m flat data cable terminated with RJ12 6P6C connector. To create the model I used the OpenSCAD - The Programmers Solid 3D CAD Modeller
Feel free to modify the OpenSCAD source code of the 3D case.
- ESP32S
- 2.4GHz WiFi 2.4g Antenna RP-SMA
- Step Down Power Supply Module Mini (set to 5V)
- RS485 to TTL converter
- prototype PCB 70x50 mm
- 4P Screw PCB Terminal Block Connector
- flat cable
- RJ12 6P6C or 6P4C connector
- some pins
