3D Case for Hoermann HCP Bridge assembled on prototype PCB

Description

I created a simple case (body + lid) for Hoermann HCP Bridge based on the project https://github.com/Gifford47/HCPBridgeMqtt.

Due weak WiFi signal I needed to place the HCP Bridge out of Hoermann SupraMatic/ProMatic case. My HCP Bridge is connected to the Hoermann motor with 5m flat data cable terminated with RJ12 6P6C connector. To create the model I used the OpenSCAD - The Programmers Solid 3D CAD Modeller

Feel free to modify the OpenSCAD source code of the 3D case.

Electronic component

• ESP32S
• 2.4GHz WiFi 2.4g Antenna RP-SMA
• Step Down Power Supply Module Mini (set to 5V)
• RS485 to TTL converter
• prototype PCB 70x50 mm
• 4P Screw PCB Terminal Block Connector
• flat cable
• RJ12 6P6C or 6P4C connector
• some pins

Project photos