This repository contains code for finding the query points that stab (or overlap) the given intervals. First, given a set of intervals, precompiled macros are used for programming the intervals on the AP board. Then, all the points to be checked are streamed to the board and the reports generated by the board are used to determine the intervals stabbed by every point.
- Following two repositories are used as submodules:
- gcc (with C++11 support)
This project has been test built only on Linux platform, using gcc with C++11 support. - AP SDK (tested with v1.7.26 and v1.7.34)
- Boost
Boost libraries are used for parsing the command line options and a few other purposes.
More information about Boost libraries can be found at http://boost.org/. - SCons
SCons, a cross-platform Python based build environment, is required for building the project.
More information about the tool can be found at http://scons.org/.
After all the dependencies have been installed, the project can be built as:
scons
This will create an executable named stab-intervals, which can be used for stabbing intervals.
Further, path to Boost libraries can be specified as:
scons BOOSTLIBPATH=<Boost library path, default is /usr/lib/x86_64-lib-gnu>
For building the debug version of the executable, following can be executed:
scons DEBUG=1
Debug version of the executable is named stab-intervals_debug.
Once the project has been built, the application can be used with any combination of user provided or random intervals and points. The executable accepts the following arguments:
-h [ --help ] Print this message.
-d [ --device ] arg Name of the AP device to be used for
stabbing intervals.
-m [ --macros ] arg (=./comparators) Directory which contains all the
comparator macros.
-f [ --fsm ] arg Name of the FSM file to be written.
-i [ --intervals ] arg Name of the file from which intervals
are to be read.
-p [ --points ] arg Name of the file from which points are
to be read.
-b [ --bytes ] arg (=4) Number of bytes.
-s [ --seed ] arg (=0) Seed for random number generator.
-I [ --random-intervals ] arg (=0) Number of random intervals to be
programmed.
-P [ --random-points ] arg (=0) Number of random points to be used for
stabbing.
-c [ --chunks ] arg Maximum chunk size for flows to the AP.
--real Use real numbers for labeling.
--signed Use signed numbers for labeling.
The application assumes unsigned 4-byte integer intervals, unless specified otherwise using the options --bytes=8 for 8-byte numbers, --signed for signed numbers, and/or --real for real numbers.
The application exits if the name of the AP device is not provided, or if it can not be opened. If the AP device can be opened, the AP-FSM is loaded on the device and a flow constructed from all the points is streamed to the device. The application then reports all the intervals stabbed by every point, using the reports generated by the device. Further, an ANML file and an AP-FSM, corresponding to the automaton to be programmed on the AP board, are generated for the provided intervals if the name of the FSM is given.
./stab-intervals -d /dev/fri0 -i intervals.txt -p points.txt
The above command will read intervals from the file named intervals.txt and points from the file named points.txt. A sample of both the files is shown below.
intervals.txt
-------------
1000 1100
1100 1200
...
...
points.txt
----------
1005
994
...
...
./stab-intervals -d /dev/fri0 -I 100 -P 1000
This will generate and print out 100 random intervals and 1000 random points and then use them for comparison.
- Roy, Indranil, Ankit Srivastava, Matt Grimm, and Srinivas Aluru. "Interval Stabbing on the Automata Processor." Journal of Parallel and Distributed Computing (2018).
- Roy, Indranil, Ankit Srivastava, Matt Grimm, and Srinivas Aluru. "Parallel Interval Stabbing on the Automata Processor." In Irregular Applications: Architecture and Algorithms (IA3), Workshop on, pp. 10-17. IEEE, 2016.