Improve examples so that they work for small MCUs (e.g. Arduino Uno).

examples/Example1_NotecardBasics/Example1_NotecardBasics.ino

@@ -69,8 +69,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -127,7 +133,7 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
+        usbSerial.println("[APP] Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }

examples/Example2_PeriodicCommunications/Example2_PeriodicCommunications.ino

@@ -88,8 +88,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -151,7 +157,7 @@ void loop()
         if (millis() > lastStatusMs + 10000)
         {
             lastStatusMs = millis();
-            notecard.logDebug("press button to simulate a sensor measurement\n");
+            usbSerial.println("[APP] press button to simulate a sensor measurement");
         }
         delay(25);
         digitalWrite(ledPin, LOW);
@@ -165,7 +171,7 @@ void loop()
     }
 
     // The button was pressed, so we should begin a transaction
-    notecard.logDebug("performing sensor measurement\n");
+    usbSerial.println("[APP] performing sensor measurement");
     lastStatusMs = millis();
 
     // Read the notecard's current temperature and voltage, as simulated sensor

examples/Example3_InboundPolling/Example3_InboundPolling.ino

@@ -58,8 +58,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -129,9 +135,9 @@ void loop()
                 {
 
                     // Simulate Processing the response here
-                    notecard.logDebug("INBOUND REQUEST: ");
-                    notecard.logDebug(JGetString(body, INBOUND_QUEUE_COMMAND_FIELD));
-                    notecard.logDebug("\n\n");
+                    usbSerial.print("[APP] INBOUND REQUEST: ");
+                    usbSerial.println(JGetString(body, INBOUND_QUEUE_COMMAND_FIELD));
+                    usbSerial.println();
                 }
             }
             notecard.deleteResponse(rsp);

examples/Example4_InboundInterrupts/Example4_InboundInterrupts.ino

@@ -71,8 +71,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -160,7 +166,9 @@ void loop()
             {
                 // Simulate Processing the response here
                 char *myCommandType = JGetString(body, INBOUND_QUEUE_COMMAND_FIELD);
-                notecard.logDebugf("INBOUND REQUEST: %s\n\n", myCommandType);
+                usbSerial.print("[APP] INBOUND REQUEST: ");
+                usbSerial.println(myCommandType);
+                usbSerial.println();
             }
         }
         notecard.deleteResponse(rsp);

examples/Example5_UsingTemplates/Example5_UsingTemplates.ino

@@ -76,8 +76,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -155,7 +161,7 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
+        usbSerial.println("[APP] Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }

examples/Example6_SensorTutorial/Example6_SensorTutorial.ino

@@ -38,8 +38,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -66,18 +72,18 @@ void loop()
     static unsigned eventCounter = 0;
     if (++eventCounter > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
+        usbSerial.println("[APP] Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }
 
     float temperature = sensor.temp();
     float humidity = sensor.humidity();
 
-    usbSerial.print("Temperature = ");
+    usbSerial.print("[APP] Temperature = ");
     usbSerial.print(temperature);
     usbSerial.println(" *C");
-    usbSerial.print("Humidity = ");
+    usbSerial.print("[APP] Humidity = ");
     usbSerial.print(humidity);
     usbSerial.println(" %");
 

examples/Example7_PowerControl/Example7_PowerControl.ino

@@ -71,8 +71,15 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !txRxSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(txRxSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // txRxSerial
+
 
     // Initialize the physical I2C I/O channel to the Notecard
     notecard.begin();
@@ -134,7 +141,7 @@ void loop()
     // Bump the number of cycles
     if (++globalState.cycles > 25)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
+        txRxSerial.println("[APP] Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }

examples/Example8_BinarySendReceive/Example8_BinarySendReceive.ino

@@ -42,8 +42,14 @@ void setup()
     const size_t usb_timeout_ms = 3000;
     for (const size_t start_ms = millis(); !usbSerial && (millis() - start_ms) < usb_timeout_ms;)
         ;
+
+    // For low-memory platforms, don't turn on internal Notecard logs.
+#ifndef NOTE_C_LOW_MEM
     notecard.setDebugOutputStream(usbSerial);
-#endif
+#else
+#pragma message("INFO: Notecard debug logs disabled. (non-fatal)")
+#endif // !NOTE_C_LOW_MEM
+#endif // usbSerial
 
     // Initialize the physical I/O channel to the Notecard
 #ifdef txRxPinsSerial
@@ -74,7 +80,7 @@ void loop()
     static unsigned event_counter = 0;
     if (++event_counter > 5)
     {
-        notecard.logDebug("Demo cycle complete. Program stopped. Press RESET to restart.\n");
+        usbSerial.println("[APP] Demo cycle complete. Program stopped. Press RESET to restart.");
         delay(10000); // 10 seconds
         return;
     }
@@ -89,23 +95,26 @@ void loop()
         uint32_t data_len = strlen(data);
         const uint32_t notecard_binary_area_offset = 0;
         NoteBinaryStoreTransmit(reinterpret_cast<uint8_t *>(data), data_len, sizeof(data), notecard_binary_area_offset);
-        notecard.logDebugf("\n[INFO] Transmitted %d bytes.\n", data_len);
+        usbSerial.print("\n[APP] Transmitted ");
+        usbSerial.print(data_len);
+        usbSerial.println(" bytes.");
 
         // Log for the sake of curiosity (not necessary for operation)
         // NOTE: NoteBinaryMaxEncodedLength() is imprecise. It will most
         //       commonly return a number greater than the actual bytes encoded.
         //       However, in this contrived example there is no difference,
         //       so it works for the purposes of displaying the encoded data --
         //       which would never be done in practice.
-        notecard.logDebug("\n*** Encoded Binary Transmission ***\n");
+        usbSerial.println("\n[APP] *** Encoded Binary Transmission ***");
         uint32_t tx_len = NoteBinaryCodecMaxEncodedLength(data_len);
         for (size_t i = 0 ; i < tx_len ; ++i) {
-            notecard.logDebugf("%02x ", data[i]);
+            usbSerial.print(data[i], HEX);
+            usbSerial.print(" ");
             if ((i + 1) % 16 == 0) {
-                notecard.logDebug("\n");
+                usbSerial.println();
             }
         }
-        notecard.logDebug("\n*** Encoded Binary Transmission ***\n\n");
+        usbSerial.println("\n[APP] *** Encoded Binary Transmission ***\n");
 
         /////////////////////////////////////////////////
         // Receive data from the Notecard binary data store
@@ -125,14 +134,16 @@ void loop()
 
         // Receive the data
         NoteBinaryStoreReceive(reinterpret_cast<uint8_t *>(rx_buffer), rx_buffer_len, 0, data_len);
-        notecard.logDebugf("\n[INFO] Received %d bytes.\n", data_len);
+        usbSerial.print("\n[APP] Received ");
+        usbSerial.print(data_len);
+        usbSerial.println(" bytes.");
 
         // Display received buffer
-        notecard.logDebug("\n*** Decoded Data ***\n");
+        usbSerial.println("\n[APP] *** Decoded Data ***");
         for (size_t i = 0 ; i < data_len ; ++i) {
-            notecard.logDebugf("%c", rx_buffer[i]);
+            usbSerial.print(rx_buffer[i]);
         }
-        notecard.logDebug("\n*** Decoded Data ***\n\n");
+        usbSerial.println("\n[APP] *** Decoded Data ***\n");
 
         // Free the receive buffer
         free(rx_buffer);