Updated MD File Changes from cosmos-sdk/docs

docs/build/building-apps/00-app-go.md

@@ -1,6 +1,5 @@
 ---
 sidebar_position: 1
-
 ---
 
 # Overview of `app.go`
@@ -11,5 +10,5 @@ For now please instead read the [tutorials](https://tutorials.cosmos.network) fo
 ## Complete `app.go`
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app.go#L107-L738
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app.go
 ```

docs/build/building-apps/01-app-go-v2.md

@@ -1,23 +1,20 @@
 ---
 sidebar_position: 1
-
 ---
 
 # Overview of `app_v2.go`
 
 :::note Synopsis
 
-The Cosmos SDK allows much easier wiring of an `app.go` thanks to App Wiring and [`depinject`](../libraries/01-depinject.md).
+The Cosmos SDK allows much easier wiring of an `app.go` thanks to App Wiring and [`depinject`](../packages/01-depinject.md).
 Learn more about the rationale of App Wiring in [ADR-057](../architecture/adr-057-app-wiring.md).
 
 :::
 
-:::note
-
-### Pre-requisite Readings
+:::note Pre-requisite Readings
 
 * [ADR 057: App Wiring](../architecture/adr-057-app-wiring.md)
-* [Depinject Documentation](../libraries/01-depinject.md)
+* [Depinject Documentation](../packages/01-depinject.md)
 * [Modules depinject-ready](../building-modules/15-depinject.md)
 
 :::
@@ -31,29 +28,29 @@ The `app_config.go` file is the single place to configure all modules parameters
 1. Create the `AppConfig` variable:
 
     ```go reference
-    https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_config.go#L91-L93
+    https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_config.go#L103
     ```
 
 2. Configure the `runtime` module:
 
     ```go reference
-    https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_config.go#L94-L158
+    https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_config.go#L103-L167
     ```
 
-3. Configure the modules defined in the `BeginBlocker` and `EndBlocker` and the `tx` module:
+3. Configure the modules defined in the `PreBlocker`, `BeginBlocker` and `EndBlocker` and the `tx` module:
 
     ```go reference
-    https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_config.go#L159-L177
+    https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_config.go#L112-L129
     ```
 
     ```go reference
-    https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_config.go#L192-L194
+    https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_config.go#L200-L203
     ```
 
 ### Complete `app_config.go`
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_config.go#L52-L254
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_config.go
 ```
 
 ### Alternative formats
@@ -93,7 +90,7 @@ modules:
       "@type": cosmos.staking.module.v1.Module
   - name: tx
     config:
-      "@type": cosmos.tx.module.v1.Module
+      "@type": cosmos.tx.config.v1.Config
 ```
 
 A more complete example of `app.yaml` can be found [here](https://github.com/cosmos/cosmos-sdk/blob/91b1d83f1339e235a1dfa929ecc00084101a19e3/simapp/app.yaml).
@@ -104,7 +101,7 @@ A more complete example of `app.yaml` can be found [here](https://github.com/cos
 In short `depinject` and the [`runtime` package](https://pkg.go.dev/github.com/cosmos/cosmos-sdk/runtime) abstract the wiring of the app, and the `AppBuilder` is the place where the app is constructed. [`runtime`](https://pkg.go.dev/github.com/cosmos/cosmos-sdk/runtime) takes care of registering the codecs, KV store, subspaces and instantiating `baseapp`.
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_v2.go#L158-L291
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_v2.go#L101-L245
 ```
 
 :::warning
@@ -118,15 +115,40 @@ In this case, use `depinject.Configs` for combining the extra configuration and
 More information on how work `depinject.Configs` and `depinject.Supply` can be found in the [`depinject` documentation](https://pkg.go.dev/cosmossdk.io/depinject).
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_v2.go#L186-L216
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_v2.go#L114-L146
+```
+
+### Registering non app wiring modules
+
+It is possible to combine app wiring / depinject enabled modules with non app wiring modules.
+To do so, use the `app.RegisterModules` method to register the modules on your app, as well as `app.RegisterStores` for registering the extra stores needed.
+
+```go
+// ....
+app.App = appBuilder.Build(db, traceStore, baseAppOptions...)
+
+// register module manually
+app.RegisterStores(storetypes.NewKVStoreKey(example.ModuleName))
+app.ExampleKeeper = examplekeeper.NewKeeper(app.appCodec, app.AccountKeeper.AddressCodec(), runtime.NewKVStoreService(app.GetKey(example.ModuleName)), authtypes.NewModuleAddress(govtypes.ModuleName).String())
+exampleAppModule := examplemodule.NewAppModule(app.ExampleKeeper)
+if err := app.RegisterModules(&exampleAppModule); err != nil {
+	panic(err)
+}
+
+// ....
 ```
 
+:::warning
+When using AutoCLI and combining app wiring and non app wiring modules. The AutoCLI options should be manually constructed instead of injected.
+Otherwise it will miss the non depinject modules and not register their CLI.
+:::
+
 ### Complete `app_v2.go`
 
 :::tip
 Note that in the complete `SimApp` `app_v2.go` file, testing utilities are also defined, but they could as well be defined in a separate file.
 :::
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/simapp/app_v2.go#L75-L395
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/simapp/app_v2.go
 ```

docs/build/building-apps/02-app-mempool.md

@@ -1,9 +1,8 @@
 ---
 sidebar_position: 1
-
 ---
 
-# Application mempool
+# Application Mempool
 
 :::note Synopsis
 This sections describes how the app-side mempool can be used and replaced. 
@@ -14,9 +13,7 @@ block building than previous versions. This change was enabled by
 [ABCI 1.0](https://github.com/cometbft/cometbft/blob/v0.37.0/spec/abci).
 Notably it introduces the `PrepareProposal` and `ProcessProposal` steps of ABCI++.
 
-:::note
-
-### Pre-requisite Readings
+:::note Pre-requisite Readings
 
 * [BaseApp](../../develop/advanced/00-baseapp.md)
 
@@ -44,14 +41,18 @@ all transactions, it can provide greater control over transaction ordering.
 Allowing the application to handle ordering enables the application to define how
 it would like the block constructed. 
 
-Currently, there is a default `PrepareProposal` implementation provided by the application.
+The Cosmos SDK defines the `DefaultProposalHandler` type, which provides applications with
+`PrepareProposal` and `ProcessProposal` handlers. If you decide to implement your
+own `PrepareProposal` handler, you must be sure to ensure that the transactions
+selected DO NOT exceed the maximum block gas (if set) and the maximum bytes provided
+by `req.MaxBytes`.
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/baseapp/baseapp.go#L868-L916
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/baseapp/abci_utils.go
 ```
 
 This default implementation can be overridden by the application developer in
-favor of a custom implementation in [`app.go`](01-app-go-v2.md):
+favor of a custom implementation in [`app.go`](./01-app-go-v2.md):
 
 ```go
 prepareOpt := func(app *baseapp.BaseApp) {
@@ -78,10 +79,13 @@ proposal is proposed.
 Here is the implementation of the default implementation:
 
 ```go reference
-https://github.com/cosmos/cosmos-sdk/blob/v0.47.0-rc1/baseapp/baseapp.go#L927-L942
+https://github.com/cosmos/cosmos-sdk/blob/v0.50.0-alpha.0/baseapp/abci_utils.go#L153-L159
 ```
 
-Like `PrepareProposal` this implementation is the default and can be modified by the application developer in [`app.go`](01-app-go-v2.md):
+Like `PrepareProposal` this implementation is the default and can be modified by
+the application developer in [`app.go`](./01-app-go-v2.md). If you decide to implement
+your own `ProcessProposal` handler, you must be sure to ensure that the transactions
+provided in the proposal DO NOT exceed the maximum block gas (if set).
 
 ```go
 processOpt := func(app *baseapp.BaseApp) {
@@ -103,7 +107,7 @@ Namely, the SDK provides the following mempools:
 * [Sender Nonce Mempool](#sender-nonce-mempool)
 * [Priority Nonce Mempool](#priority-nonce-mempool)
 
-The default SDK is a [No-op Mempool](#no-op-mempool), but it can be replaced by the application developer in [`app.go`](01-app-go-v2.md):
+The default SDK is a [No-op Mempool](#no-op-mempool), but it can be replaced by the application developer in [`app.go`](./01-app-go-v2.md):
 
 ```go
 nonceMempool := mempool.NewSenderNonceMempool()
@@ -117,6 +121,9 @@ A no-op mempool is a mempool where transactions are completely discarded and ign
 When this mempool is used, it assumed that an application will rely on CometBFT's transaction ordering defined in `RequestPrepareProposal`,
 which is FIFO-ordered by default.
 
+> Note: If a NoOp mempool is used, PrepareProposal and ProcessProposal both should be aware of this as
+> PrepareProposal could include transactions that could fail verification in ProcessProposal.
+
 ### Sender Nonce Mempool
 
 The nonce mempool is a mempool that keeps transactions from an sorted by nonce in order to avoid the issues with nonces.