Merge pull request #1482 from MichaelDvP/dev2

Testbuild

CHANGELOG.md

@@ -5,6 +5,45 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [3.6.4] November 24 2023
+
+## **IMPORTANT! BREAKING CHANGES**
+
+Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`... You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
+
+## Added
+
+- humidity for ventilation devices
+- telegrams for RC100H, hc2, etc. (seen on discord, not tested)
+- names for BC400, GB192i.2, read temperatures for low loss header and heatblock [#1317](https://github.com/emsesp/EMS-ESP32/discussions/1317)
+- option for `forceheatingoff` [#1262](https://github.com/emsesp/EMS-ESP32/issues/1262)
+- remote thermostat emulation RC100H for RC3xx [#1278](https://github.com/emsesp/EMS-ESP32/discussions/1278)
+- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
+- HA discovery for writeable text entities [#1337](https://github.com/emsesp/EMS-ESP32/pull/1377)
+- autodetect board_profile, store in nvs, add telnet command option, add E32V2
+- heat pump high res energy counters [#1348, #1349. #1350](https://github.com/emsesp/EMS-ESP32/issues/1348)
+- optional bssid in network settings
+- extension module EM100 [#1315](https://github.com/emsesp/EMS-ESP32/discussions/1315)
+- digital_out with new options for polarity and startup state
+- added 'system allvalues' command that dumps all the EMS device values, plus sensors and any custom entities
+
+## Fixed
+
+- remove command `remoteseltemp`, thermostat accept it only from remote thermostat
+- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
+- fixed helper text in Web Device Entity dialog box for numerical ranges
+- MQTT base with paths not working in HA [#1393](https://github.com/emsesp/EMS-ESP32/issues/1393)
+- set/read thermostat mode for RC100-RC300, [#1440](https://github.com/emsesp/EMS-ESP32/issues/1440) [#1442](https://github.com/emsesp/EMS-ESP32/issues/1442)
+- some setting commands for ems-boiler have used wrong ems+ telegram in 3.6.3
+
+## Changed
+
+- update to platform 6.4.0, arduino 2.0.14 / idf 4.4.6
+- small changes for arduino 3.0.0 / idf 5.1 compatibility (not backward compatible to platform 6.3.2 and before)
+- AP start after 10 sec, stay until station/eth connected
+- tested wifi-all-channel-scan (3.6.3-dev4 a-e), removed again because of connect issues
+- mqtt disconnect stops queue
+
 ## [3.6.2] October 1 2023
 
 ## **IMPORTANT! BREAKING CHANGES**

CHANGELOG_LATEST.md

@@ -1,38 +1,25 @@
 # Changelog
 
-## [3.6.3]
+## [3.6.5]
 
 ## **IMPORTANT! BREAKING CHANGES**
 
-Writeable Text entities have moved from type `sensor` to `text` in Home Assistant to make them also editable within an HA dashboard. Examples are `datetime`, `holidays`, `switchtime`, `vacations`, `maintenancedate`... You will need to manually remove any old discovery topics from your MQTT broker using an application like MQTT Explorer.
+- new device WATER shows dhw entities from MM100 and SM100 in dhw setting
 
 ## Added
 
-- humidity for ventilation devices
-- telegrams for RC100H, hc2, etc. (seen on discord, not tested)
-- names for BC400, GB192i.2, read temperatures for low loss header and heatblock [#1317](https://github.com/emsesp/EMS-ESP32/discussions/1317)
-- option for `forceheatingoff` [#1262](https://github.com/emsesp/EMS-ESP32/issues/1262)
-- remote thermostat emulation RC100H for RC3xx [#1278](https://github.com/emsesp/EMS-ESP32/discussions/1278)
-- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
-- HA discovery for writeable text entities [#1337](https://github.com/emsesp/EMS-ESP32/pull/1377)
-- autodetect board_profile, store in nvs, add telnet command option, add E32V2
-- heatpump high res energy counters [#1348, #1349. #1350](https://github.com/emsesp/EMS-ESP32/issues/1348)
-- optional bssid in network settings
-- extension module EM100 [#1315](https://github.com/emsesp/EMS-ESP32/discussions/1315)
-- digital_out with new options for polarity and startup state
-- added 'system allvalues' command that dumps all the EMS device values, plus sensors and any custom entities
+- some more entities for dhw with SM100 module
+- thermostat boost mode and boost time [#1446](https://github.com/emsesp/EMS-ESP32/issues/1446)
+- heatpump energy meters [#1463](https://github.com/emsesp/EMS-ESP32/issues/1463)
+- heatpump max power [#1475](https://github.com/emsesp/EMS-ESP32/issues/1475)
+- checkbox for MQTT-TLS enable [#1474](https://github.com/emsesp/EMS-ESP32/issues/1474)
 
 ## Fixed
 
-- remove command `remoteseltemp`, thermostat accept it only from remote thermostat
-- shower_data MQTT payload contains the timestamp [#1329](https://github.com/emsesp/EMS-ESP32/issues/1329)
-- fixed helper text in Web Device Entity dialog box for numerical ranges
-- MQTT base with paths not working in HA [#1393](https://github.com/emsesp/EMS-ESP32/issues/1393)
+- exhaust temperature for some boilers
+- add back boil2hyst [#1477](https://github.com/emsesp/EMS-ESP32/issues/1477)
 
 ## Changed
 
-- update to platform 6.4.0, arduino 2.0.14 / idf 4.4.6
-- small changes for arduino 3.0.0 / idf 5.1 compatibility (not backward compatible to platform 6.3.2 and before)
-- AP start after 10 sec, stay until station/eth connected
-- tested wifi-all-channel-scan (3.6.3-dev4 a-e), removed again because of connect issues
-- mqtt disconnect stops queue
+- use flag for BC400 compatible thermostats, manage different mode settings
+- HA don't set entity_category to Diagnostic/Configuration for EMS entities [#1459](https://github.com/emsesp/EMS-ESP32/discussions/1459)

Makefile

@@ -42,7 +42,7 @@ DEFINES += -DARDUINOJSON_ENABLE_STD_STRING=1 -DARDUINOJSON_ENABLE_PROGMEM=1 -DAR
 DEFINES += -DEMSESP_DEBUG -DEMSESP_STANDALONE -DEMSESP_TEST -D__linux__ -DEMC_RX_BUFFER_SIZE=1500
 DEFINES += $(ARGS)
 
-DEFAULTS = -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.0-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
+DEFAULTS = -DEMSESP_DEFAULT_LOCALE=\"en\" -DEMSESP_DEFAULT_TX_MODE=8 -DEMSESP_DEFAULT_VERSION=\"3.6.4-dev\" -DEMSESP_DEFAULT_BOARD_PROFILE=\"S32\"
 
 #----------------------------------------------------------------------
 # Sources & Files