[WIP] Layer 2 example including interconnection and VRF

examples/layer2/README.md

@@ -0,0 +1,34 @@
+# Layer 2 networking with Equinix Metal
+
+This example playbook demonstrates the use of the `equinix.cloud.metal_connection`, `equinix.cloud.metal_device`, and `equinix.cloud.metal_port` modules to configure Layer 2 connectivity from an Equinix Metal device to an AWS S3 bucket over a Metal-billed Fabric interconnection.
+
+## Overview
+
+The [playbook](main.yml) creates a new project, creates 2 VLANs, provisions a device, and configures the device through different [network types](https://deploy.equinix.com/developers/docs/metal/layer2-networking/overview/#network-configuration-types).
+
+
+## Prerequisites
+
+Before running the playbook, you will need to have the following:
+
+- Ansible installed on your local machine.
+- The Equinix Ansible Collection installed. You can install it using the following command:
+  ```bash
+  ansible-galaxy collection install equinix.cloud
+  ```
+- An Equinix Metal API token. You can obtain an API token from the Equinix Metal Portal. Set the environment variable METAL_AUTH_TOKEN to your API token:
+  ```bash
+  export METAL_AUTH_TOKEN=your_api_token_here
+  ```
+
+## Variables
+
+You can customize some variables from [vars/equinix_metal_vars.yml](vars/equinix_metal_vars.yml).
+
+## Running the Playbook
+
+To run the playbook, navigate to the directory containing the playbook file `main.yml` and run the following command:
+
+```bash
+ansible-playbook main.yml
+```

examples/layer2/main.yml

@@ -0,0 +1,115 @@
+---
+- name: Equinix Metal Example Playbook
+  hosts: localhost
+  gather_facts: no
+  tasks:
+    - name: Include the required variables
+      include_vars: "vars/equinix_metal_vars.yml"
+
+    # Equinix resources
+    - name: Create a project
+      equinix.cloud.metal_project:
+        name: "{{ project_name }}"
+      register: project
+
+    - name: create a vlan
+      equinix.cloud.metal_vlan:
+        project_id: "{{ project.id }}"
+        metro: "{{ metro }}"
+        vxlan: "1234"
+      register: vlan
+
+    - name: create a VRF
+      equinix.cloud.metal_vrf:
+        name: example-vrf
+        metro: "{{ metro }}"
+        local_asn: 65000
+        ip_ranges:
+          - 192.168.200.0/25
+          - 169.254.0.0/29
+        project_id: "{{ project.id }}"
+      register: vrf
+
+    - name: create a VRF IP reservation
+      equinix.cloud.metal_reserved_ip_block:
+        project_id: "{{ project.id }}"
+        vrf_id: "{{ vrf.id }}"
+        type: "vrf"
+        metro: "{{ metro }}"
+        network: 192.168.200.0
+        cidr: 25
+      register: vrf_ip_reservation
+
+    - name: create a VRF Metal Gateway
+      equinix.cloud.metal_gateway:
+        project_id: "{{ project.id }}"
+        ip_reservation_id: "{{ vrf_ip_reservation.id }}"
+        virtual_network_id: "{{ vlan.id }}"
+      register: gateway
+
+    # Create a device
+    # TODO: gateway module does not expose the
+    # gateway IP so I'm hard-coding it for now.
+    # In the future it should be referenced as
+    # {{gateway.ip}} (or similar) instead. The
+    # device IP address should also be calculated
+    # rather than hard-coded
+    - name: Create a device
+      equinix.cloud.metal_device:
+        project_id: "{{ project.id }}"
+        metro: "{{ metro }}"
+        hostname: "{{ device_hostname }}"
+        operating_system: "{{ operating_system }}"
+        plan: "{{ plan }}"
+        state: present
+        userdata: |2
+          #!/bin/bash
+
+          cat <<EOF >> /etc/network/interfaces
+          auto bond0.{{vlan.vxlan}}
+          iface bond0.{{vlan.vxlan}} inet static
+              address 192.168.200.2
+              netmask 255.255.255.128
+              post-up route add -net 192.168.200.0/25 gw 192.168.200.1
+              post-up route add -net {{aws_network_cidr}} gw 192.168.200.1
+          EOF
+
+          systemctl restart networking
+      register: device
+
+    - name: capture port ids for device
+      set_fact:
+        bond_port_id: "{{ device.network_ports | selectattr('name', 'match', 'bond0') | map(attribute='id') | first }}"
+        eth1_port_id: "{{ device.network_ports | selectattr('name', 'match', 'eth1') | map(attribute='id') | first }}"
+
+    - name: convert bond port to hybrid bonded mode
+      equinix.cloud.metal_port:
+        id: "{{ bond_port_id }}"
+        bonded: true
+        layer2: false
+        vlan_ids:
+          - "{{ vlan.id }}"
+
+    - name: create a Metal-billed VRF interconnection
+      equinix.cloud.metal_connection:
+        project_id: "{{ project.id }}"
+        metro: "{{ metro }}"
+        name: "{{ interconnection_name }}"
+        type: "shared"
+        speed: "1Gbps"
+        service_token_type: a_side
+        redundancy: primary
+        vrfs:
+          - "{{ vrf.id }}"
+      register: connection
+
+    - debug:
+        var: connection
+
+    - name: configure BGP for interconnection virtual circuit
+      equinix.cloud.metal_virtual_circuit:
+        id: "{{ connection.virtual_circuits[0].id }}"
+        peer_asn: 65100
+        customer_ip: 169.254.0.2
+        metal_ip: 169.254.0.1
+        subnet: 169.254.0.0/30

examples/layer2/vars/equinix_metal_vars.yml

@@ -0,0 +1,7 @@
+project_name: my_metal_layer2_project
+device_hostname: layer2-device
+metro: sv
+operating_system: ubuntu_20_04
+plan: c3.small.x86
+interconnection_name: "layer2 interconnection"
+aws_network_cidr: 172.31.0.0/16