Merge branch 'feat/support_mipi_dsi_lcd' into 'master'

feat(bus & lcd): support MIPI-DSI LCD

Closes #119
Closes #39

See merge request ae_group/ESP32_Display_Panel!2

.build-rules.yml

@@ -15,6 +15,10 @@ test_apps/lcd/qspi:
   disable:
     - if: SOC_GPSPI_SUPPORTED != 1
 
+test_apps/lcd/mipi_dsi:
+  disable:
+    - if: SOC_MIPI_DSI_SUPPORTED != 1
+
 test_apps/lcd/rgb:
   disable:
     - if: SOC_LCD_RGB_SUPPORTED != 1

.gitlab/ci/build.yml

@@ -49,6 +49,13 @@
       - IMAGE: espressif/idf:release-v5.1
       - IMAGE: espressif/idf:release-v5.2
       - IMAGE: espressif/idf:release-v5.3
+      - IMAGE: espressif/idf:release-v5.4
+
+.build_esp32_p4_idf_release_version:
+  parallel:
+    matrix:
+      - IMAGE: espressif/idf:release-v5.3
+      - IMAGE: espressif/idf:release-v5.4
 
 # Test apps
 build_test_apps_lcd_3wire_spi_rgb:
@@ -59,6 +66,14 @@ build_test_apps_lcd_3wire_spi_rgb:
   variables:
     EXAMPLE_DIR: test_apps/lcd/3wire_spi_rgb
 
+build_test_apps_lcd_mipi_dsi:
+  extends:
+    - .build_examples_template
+    - .build_esp32_p4_idf_release_version
+    - .rules:build:test_apps_lcd_mipi_dsi
+  variables:
+    EXAMPLE_DIR: test_apps/lcd/mipi_dsi
+
 build_test_apps_lcd_qspi:
   extends:
     - .build_examples_template

.gitlab/ci/rules.yml

@@ -26,6 +26,9 @@
 .patterns-test_apps_lcd_3wire_spi_rgb: &patterns-test_apps_lcd_3wire_spi_rgb
   - "test_apps/lcd/3wire_spi_rgb/**/*"
 
+.patterns-test_apps_lcd_mipi_dsi: &patterns-test_apps_lcd_mipi_dsi
+  - "test_apps/lcd/mipi_dsi/**/*"
+
 .patterns-test_apps_lcd_qspi: &patterns-test_apps_lcd_qspi
   - "test_apps/lcd/qspi/**/*"
 
@@ -103,6 +106,19 @@
     - <<: *if-dev-push
       changes: *patterns-test_apps_lcd_3wire_spi_rgb
 
+.rules:build:test_apps_lcd_mipi_dsi:
+  rules:
+    - <<: *if-protected
+    - <<: *if-label-build
+    - <<: *if-label-target_test
+    - <<: *if-trigger-job
+    - <<: *if-dev-push
+      changes: *patterns-build_system
+    - <<: *if-dev-push
+      changes: *patterns-component
+    - <<: *if-dev-push
+      changes: *patterns-test_apps_lcd_mipi_dsi
+
 .rules:build:test_apps_lcd_qspi:
   rules:
     - <<: *if-protected

CHANGELOG.md

@@ -1,21 +1,36 @@
 # ChangeLog
 
-## v0.1.9 - 2024-10-29
+## v0.2.0 - 2024-11-08
 
-* feat(board): add support for Waveshare ESP32-S3-Touch-LCD-2.1
+### Enhancements:
 
-## v0.1.8 - 2024-10-25
+* feat(repo): support build on the esp-idf
+* feat(bus & lcd): support MIPI-DSI LCD
+* feat(lcd): add LCD controller EK79007
+* feat(lcd): add LCD controller ILI9881C
+* feat(panel): add support for MIPI-DSI LCD
+* feat(board): add support for Waveshare ESP32-S3-Touch-LCD-2.1 @martinroger (#117)
+* feat(board): add support for Espressif ESP32-P4-Function-EV-Board
+* feat(examples): add MIPI-DSI LCD
+* feat(examples): optimize anti-tear rotation in lvgl_port_v8
+* feat(ci): update for MIPI-DSI LCD
+* feat(test_apps): add MIPI-DSI LCD
 
-* feat(board): add support for Waveshare ESP32-S3-Touch-LCD-1.85
+### Bugfixes:
 
-### Enhancements:
+* fix(touch): release ISR semaphore when delete
 
-## v0.1.7 - 2024-08-22
+## v0.1.8 - 2024-10-25
 
 ### Enhancements:
 
+* feat(board): add support for Waveshare ESP32-S3-Touch-LCD-1.85 @martinroger (#115)
 * feat(docs): add additional information about screen drift issue
 
+### Bugfixes:
+
+* fix(examples): correct readme broken links
+
 ## v0.1.6 - 2024-07-30
 
 ### Enhancements:

ESP_Panel_Board_Custom.h

@@ -110,8 +110,6 @@
                                                         // |--------------|---------------|
     #define ESP_PANEL_LCD_RGB_DATA_WIDTH        (16)    // |      8       |      16       |
     #define ESP_PANEL_LCD_RGB_PIXEL_BITS        (16)    // |      24      |      16       |
-
-    #define ESP_PANEL_LCD_RGB_FRAME_BUF_NUM     (1)     // 1/2/3
     #define ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE   (0)     // Bounce buffer size in bytes. This function is used to avoid screen drift.
                                                         // To enable the bounce buffer, set it to a non-zero value. Typically set to `ESP_PANEL_LCD_WIDTH * 10`
                                                         // The size of the Bounce Buffer must satisfy `width_of_lcd * height_of_lcd = size_of_buffer * N`,
@@ -121,7 +119,6 @@
     #define ESP_PANEL_LCD_RGB_IO_DE             (17)    // -1 if not used
     #define ESP_PANEL_LCD_RGB_IO_PCLK           (9)
     #define ESP_PANEL_LCD_RGB_IO_DISP           (-1)    // -1 if not used
-
                                                         // | RGB565 | RGB666 | RGB888 |
                                                         // |--------|--------|--------|
     #define ESP_PANEL_LCD_RGB_IO_DATA0          (10)    // |   B0   |  B0-1  |   B0-3 |
@@ -158,6 +155,22 @@
                                                                 // The `mirror()` function will be implemented by LCD command if set to 1.
 #endif
 
+#elif ESP_PANEL_LCD_BUS_TYPE == ESP_PANEL_BUS_TYPE_MIPI_DSI
+
+    #define ESP_PANEL_LCD_MIPI_DSI_LANE_NUM         (2)     // ESP32-P4 supports 1 or 2 lanes
+    #define ESP_PANEL_LCD_MIPI_DSI_LANE_RATE_MBPS   (1000)  // Single lane bit rate, should consult the LCD supplier or check the
+                                                            // LCD drive IC datasheet for the supported lane rate.
+                                                            // ESP32-P4 supports max 1500Mbps
+    #define ESP_PANEL_LCD_MIPI_DSI_PHY_LDO_ID       (3)     // -1 if not used
+    #define ESP_PANEL_LCD_MIPI_DPI_CLK_MHZ          (52)
+    #define ESP_PANEL_LCD_MIPI_DPI_PIXEL_BITS       (ESP_PANEL_LCD_RGB565_COLOR_BITS_16)
+    #define ESP_PANEL_LCD_MIPI_DSI_HPW              (10)
+    #define ESP_PANEL_LCD_MIPI_DSI_HBP              (160)
+    #define ESP_PANEL_LCD_MIPI_DSI_HFP              (160)
+    #define ESP_PANEL_LCD_MIPI_DSI_VPW              (1)
+    #define ESP_PANEL_LCD_MIPI_DSI_VBP              (23)
+    #define ESP_PANEL_LCD_MIPI_DSI_VFP              (12)
+
 #else
 
 #error "The function is not ready and will be implemented in the future."
@@ -380,8 +393,8 @@
  *
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 2
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 3
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 3
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
 
 #endif /* ESP_PANEL_USE_CUSTOM_BOARD */
 

ESP_Panel_Board_Supported.h

@@ -31,6 +31,7 @@
  *  - BOARD_ESP32_S3_LCD_EV_BOARD_2 (ESP32-S3-LCD-EV-Board-2(v1.1-v1.4))): https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/user_guide_v1.4.html
  *  - BOARD_ESP32_S3_LCD_EV_BOARD_2_V1_5 (ESP32-S3-LCD-EV-Board-2(v1.5)): https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/user_guide.html
  *  - BOARD_ESP32_S3_USB_OTG (ESP32-S3-USB-OTG): https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-usb-otg/index.html
+ *  - BOARD_ESP32_P4_FUNCTION_EV_BOARD (ESP32-P4-Function-EV-Board): https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html
  *
  */
 // #define BOARD_ESP32_C3_LCDKIT
@@ -45,6 +46,7 @@
 // #define BOARD_ESP32_S3_LCD_EV_BOARD_2
 // #define BOARD_ESP32_S3_LCD_EV_BOARD_2_V1_5
 // #define BOARD_ESP32_S3_USB_OTG
+// #define BOARD_ESP32_P4_FUNCTION_EV_BOARD
 
 /*
  * Elecrow (https://www.elecrow.com):
@@ -101,7 +103,7 @@
  *
  */
 #define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MAJOR 0
-#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MINOR 5
-#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_PATCH 1
+#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MINOR 6
+#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_PATCH 0
 
 #endif

README.md

@@ -36,7 +36,7 @@ Below is the list of [supported development boards](docs/Board_Instructions.md):
 
 | **Manufacturer** | **Board Model** |
 | ---------------- | --------------- |
-| [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG |
+| [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG, ESP32-P4-Function-EV-Board |
 | [Elecrow](docs/Board_Instructions.md#elecrow) | CrowPanel 7.0" |
 | [M5Stack](docs/Board_Instructions.md#m5stack) | M5STACK-M5CORE2, M5STACK-M5DIAL, M5STACK-M5CORES3 |
 | [Jingcai](docs/Board_Instructions.md#shenzhen-jingcai-intelligent) | ESP32-4848S040C_I_Y_3 |

README_CN.md

@@ -36,7 +36,7 @@ ESP32_Display_Panel 的功能框图如下所示，主要包含以下特性：
 
 | **厂商** | **开发板型号** |
 | -------- | -------------- |
-| [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG |
+| [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG, ESP32-P4-Function-EV-Board |
 | [M5Stack](docs/Board_Instructions.md#m5stack) | M5STACK-M5CORE2, M5STACK-M5DIAL, M5STACK-M5CORES3 |
 | [Elecrow](docs/Board_Instructions.md#elecrow) | CrowPanel 7.0" |
 | [Jingcai](docs/Board_Instructions.md#shenzhen-jingcai-intelligent) | ESP32-4848S040C_I_Y_3 |

docs/Board_Contribution_Guide.md

@@ -1,5 +1,15 @@
 # Board Contribution Guide
 
+* [中文版本](./Board_Contribution_Guide_CN.md)
+
+## Table of Contents
+
+- [Board Contribution Guide](#board-contribution-guide)
+  - [Table of Contents](#table-of-contents)
+  - [Contribution Guidelines](#contribution-guidelines)
+  - [File Modifications](#file-modifications)
+  - [Adaptation Process](#adaptation-process)
+
 ## Contribution Guidelines
 
 1. The development board must at least ensure its hardware schematic is open-source, providing a link or file for reference.

docs/Board_Contribution_Guide_CN.md

@@ -1,5 +1,15 @@
 # 开发板贡献指南
 
+* [English Version](./Board_Contribution_Guide.md)
+
+## 目录
+
+- [开发板贡献指南](#开发板贡献指南)
+  - [目录](#目录)
+  - [贡献说明](#贡献说明)
+  - [文件修改](#文件修改)
+  - [适配流程](#适配流程)
+
 ## 贡献说明
 
 1. 开发板至少需要确保其硬件原理图开源，并提供链接或文件。

docs/Board_Instructions.md

@@ -16,6 +16,7 @@
 |             <img src="https://docs.espressif.com/projects/esp-dev-kits/en/latest/_images/ESP32-S3-LCD-EV-Board_480x480.png" width="150">             |    [ESP32-S3-LCD-EV-Board](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/index.html)    | 3-wire SPI + RGB |       GC9503       |      480x480       |      I2C      |        FT5x06        |
 |             <img src="https://docs.espressif.com/projects/esp-dev-kits/en/latest/_images/ESP32-S3-LCD-EV-Board_800x480.png" width="150">             |   [ESP32-S3-LCD-EV-Board-2](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-lcd-ev-board/index.html)   |       RGB        |     ST7262E43      |      800x480       |      I2C      |        GT1151        |
 |               <img src="https://docs.espressif.com/projects/esp-dev-kits/en/latest/_images/pic_product_esp32_s3_otg.png" width="150">                |         [ESP32-S3-USB-OTG](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-usb-otg/index.html)         |       SPI        |       ST7789       |      240x240       |       -       |          -           |
+|               <img src="https://www.espressif.com/sites/default/files/dev-board/ESP32-P4-Function-EV-Board_L_2.png" width="150">                |         [ESP32-P4-Function-EV-Board](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html)         |       MIPI-DSI        |       EK79007       |      1024x600       |       I2C       |          GT911           |
 
 ### [Elecrow](https://www.elecrow.com/)
 
@@ -62,6 +63,7 @@ Below are recommended configurations for developing GUI applications on differen
 |      ESP32-S3-LCD-EV-Board       | ESP32S3 Dev Module |   OPI    | QIO 80MHz  |    16MB    | **See Note 1**  |     16M Flash (3MB)     |
 |     ESP32-S3-LCD-EV-Board-2      | ESP32S3 Dev Module |   OPI    | QIO 80MHz  |    16MB    | **See Note 1**  |     16M Flash (3MB)     |
 |         ESP32-S3-USB-OTG         |  ESP32-S3-USB-OTG  |    -     |     -      |     -      |        -        |     8M with spiffs      |
+|   ESP32-P4-Function-EV-Board     | ESP32P4 Dev Module | Enabled  |    QIO     |    16MB    |    Disabled     |     16M Flash (3MB)     |
 |         M5STACK-M5CORE2          |   M5Stack-Core2    | Enabled  |     -      |     -      |        -        |         Default         |
 |          M5STACK-M5DIAL          | ESP32S3 Dev Module |   OPI    | QIO 80MHz  |    8MB     |    Disabled     |         Default         |
 |         M5STACK-M5CORES3         | ESP32S3 Dev Module |   OPI    | QIO 80MHz  |    16MB    |     Enabled     | Default 4MB with spiffs |

docs/FAQ.md

@@ -1,5 +1,17 @@
 # FAQ
 
+* [中文版本](./FAQ_CN.md)
+
+## Table of Contents
+
+- [FAQ](#faq)
+  - [Table of Contents](#table-of-contents)
+  - [Where is the directory for Arduino libraries?](#where-is-the-directory-for-arduino-libraries)
+  - [How to Install ESP32\_Display\_Panel in Arduino IDE?](#how-to-install-esp32_display_panel-in-arduino-ide)
+  - [Where are the installation directory for arduino-esp32 and the SDK located?](#where-are-the-installation-directory-for-arduino-esp32-and-the-sdk-located)
+  - [How to fix screen drift issue when driving RGB LCD with ESP32-S3?](#how-to-fix-screen-drift-issue-when-driving-rgb-lcd-with-esp32-s3)
+  - [How to Use ESP32\_Display\_Panel on PlatformIO?](#how-to-use-esp32_display_panel-on-platformio)
+
 ## Where is the directory for Arduino libraries?
 
 You can find and modify the directory path for Arduino libraries by selecting `File` > `Preferences` > `Settings` > `Sketchbook location` from the menu bar in the Arduino IDE.

docs/FAQ_CN.md

@@ -1,5 +1,17 @@
 # 常见问题解答
 
+* [English Version](./FAQ.md)
+
+## 目录
+
+- [常见问题解答](#常见问题解答)
+  - [目录](#目录)
+  - [Arduino 库的目录在哪儿？](#arduino-库的目录在哪儿)
+  - [如何在 Arduino IDE 中安装 ESP32\_Display\_Panel？](#如何在-arduino-ide-中安装-esp32_display_panel)
+  - [arduino-eps32 的安装目录以及 SDK 的目录在哪儿？](#arduino-eps32-的安装目录以及-sdk-的目录在哪儿)
+  - [使用 ESP32-S3 驱动 RGB LCD 时出现画面漂移问题的解决方案](#使用-esp32-s3-驱动-rgb-lcd-时出现画面漂移问题的解决方案)
+  - [如何在 PlatformIO 上使用 ESP32\_Display\_Panel？](#如何在-platformio-上使用-esp32_display_panel)
+
 ## Arduino 库的目录在哪儿？
 
 您可以在 Arduino IDE 的菜单栏中选择 `File` > `Preferences` > `Settings` > `Sketchbook location` 来查找和修改 Arduino 库的目录路径。