Adding The Wand Company's PipBoy to master

espruino · Nov 21, 2024 · 88d280e · 88d280e
1 parent d803dfc
commit 88d280e
Show file tree

Hide file tree

Showing 23 changed files with 3,005 additions and 3 deletions.
diff --git a/boards/PIPBOY.py b/boards/PIPBOY.py
@@ -0,0 +1,195 @@
+#!/bin/false
+# This file is part of Espruino, a JavaScript interpreter for Microcontrollers
+#
+# Copyright (C) 2013 Gordon Williams <[email protected]>
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# ----------------------------------------------------------------------------------------
+# This file contains information for a specific board - the available pins, and where LEDs,
+# Buttons, and other in-built peripherals are. It is used to build documentation as well
+# as various source and header files for Espruino.
+# ----------------------------------------------------------------------------------------
+
+import pinutils;
+info = {
+ 'name' : "Fallout TV series Pip-Boy",
+ 'link' :  [ "https://www.thewandcompany.com/fallout-pip-boy" ],
+ 'variables' : 5000, # 5000 -> 65k for vars (we have 128k main memory, but 40k is the stream buffer)
+ 'binary_name' : 'espruino_%v_pipboy.bin',
+ 'default_console' : "EV_SERIAL3",
+ 'default_console_tx' : "B10",
+ 'default_console_rx' : "B11",
+ 'default_console_baudrate' : "115200",
+ 'io_buffer_size' : 512,
+ 'xoff_thresh' : 3,
+ 'xon_thresh' : 2,
+ 'build' : {
+   'optimizeflags' : '-Os',
+   'libraries' : [
+     'USB_HID',
+     'GRAPHICS',
+     'LCD_FSMC',
+     'FILESYSTEM',
+     'FILESYSTEM_SDIO',
+     'JIT'
+   ],
+   'makefile' : [
+     'DEFINES+=-DUSE_USB_OTG_FS=1',
+     'DEFINES+=-DUSE_RTC',
+    #'DEFINES+=-DESPR_MIN_WFI_TIME_MS=200', # delays when we enter __WFI sleep - but we don't need this after #2575
+     'DEFINES+=-DUSE_FONT_6X8 -DGRAPHICS_PALETTED_IMAGES -DGRAPHICS_ANTIALIAS -DESPR_PBF_FONTS -DESPR_GRAPHICS_INTERNAL -DESPR_GRAPHICS_SELF_INIT -DESPR_GRAPHICS_NO_SPLASH -DGRAPHICS_FAST_PATHS',
+     'DEFINES+=-DESPR_SDIO_FAST_UNALIGNED',  # see sdio_diskio.c - this is a nasty hack to increase unaligned read speed
+     'DEFINES+=-DLCD_ORIENTATION_LANDSCAPE',
+     'DEFINES+=-DUSE_AUDIO_CODEC',
+     'DEFINES+=-DESPR_DELAY_MULTIPLIER=28672', # don't work out what to use for jshDelayMicroseconds at boot, just hard-code it
+     'DEFINES+=-DESPR_RTC_INITIALISE_TICKS=30', # 168Mhz so we need to wait more ticks for the RTC to init (21->2s doesn't seem to be enough - this is nearer 3s!)
+     'DEFINES+=-DESPR_RTC_ALWAYS_TRY_LSE', # If we boot and RTC is initialised but using LSI, try again at starting LSE
+     'DEFINES+=-DESPR_FS_LARGE_WRITE_BUFFER', # speeds up SD card writes ~3x
+     'DEFINES+=-DESPR_LCD_MANUAL_BACKLIGHT', # Pipboy handles LCD backlight on/off so we can reduce flicker
+     'DEFINES+=-DESPR_OFFICIAL_BOARD', # Don't display the donations nag screen
+     'STLIB=STM32F407xx',
+     '-DHSE_VALUE=9000000',
+#     'DEFINES+=-DFSMC_BITBANG',
+     'PRECOMPILED_OBJS+=$(ROOT)/targetlibs/stm32f4/lib/startup_stm32f40_41xxx.o',
+     'TARGETSOURCES+=targetlibs/stm32f4/lib/stm32f4xx_fsmc.c',
+     'INCLUDE += -I$(ROOT)/libs/pipboy',
+     'WRAPPERSOURCES += libs/pipboy/avi.c libs/pipboy/stm32_i2s.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_pipboy.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_120.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_96.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_36.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_28.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_23.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_18.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_font_monofonto_16.c',
+#     'USE_DFU=1'
+   ]
+  }
+};
+
+chip = {
+  'part' : "STM32F407VE",
+  'family' : "STM32F4",
+  'package' : "LQFP100",
+  'ram' : 192,
+  'flash' : 512,
+#  'flash_base' : 0x08000000,
+  'speed' : 168,
+  'usart' : 6,
+  'spi' : 3,
+  'i2c' : 3,
+  'adc' : 3,
+  'dac' : 2,
+  'saved_code' : { # last page
+    'address' : 0x08060000,
+    'page_size' : 131072, # size of pages
+    'pages' : 1, # number of pages we're using
+    'flash_available' : 384 # Saved code is after binary
+  },
+};
+
+devices = {
+  'OSC' : { 'pin_1' : 'H0',
+            'pin_2' : 'H1' },
+  'OSC_RTC' : { 'pin_1' : 'C14',
+                'pin_2' : 'C15' },
+  'LED1' : { 'pin' : 'E4', 'pinstate' : 'OUT_OPENDRAIN' }, # Red element of RGB LED - needs to be open-drain otherwise we can't turn it off completely
+  'LED2' : { 'pin' : 'E5' }, # Green element of RGB LED
+  'LED3' : { 'pin' : 'E6' }, # Blue element of RGB LED
+  'LED4' : { 'pin' : 'E3' }, # Radio tuning indicator LED
+  'BTN1' : { 'pin' : 'A1' }, # "Play" button
+  'BTN2' : { 'pin' : 'E1' }, # "Up" button
+  'BTN3' : { 'pin' : 'E2' }, # "Down" button
+  'BTN4' : { 'pin' : 'A2' }, # "Flashlight" button
+  'BTN5' : { 'pin' : 'A10' }, # Thumbwheel encoder A - PA9 for v0.3, PA10 for v0.5 and later
+  'BTN6' : { 'pin' : 'A8' }, # Thumbwheel encoder B
+  'BTN7' : { 'pin' : 'A3' }, # Clock "select" button
+  'BTN8' : { 'pin' : 'B1' }, # Clock encoder A
+  'BTN9' : { 'pin' : 'B0' }, # Clock encoder B
+  'BTN10' : { 'pin' : 'A0' }, # "Power" button
+
+  'BAT' : {
+            'pin_sense_en' : 'C4',
+            'pin_voltage' : 'A6',
+            'pin_charging' : 'C5',
+          },
+  'SD' :  { 'pin_cmd' :  'D2',
+            'pin_d0' :  'C8',
+            'pin_d1' :  'C9',
+            'pin_d2' :  'C10',
+            'pin_d3' :  'C11',
+            'pin_clk' : 'C12',
+            'pin_cd' :  'A15', # SD card detect switch - doesn't work on hardware v0.3
+            'pin_pwr' : 'D3'}, # SD card power supply enable (also switches power to the ES8388 audio codec)
+  'LCD' : {
+            'width' : 480, 'height' : 320, 'bpp' : 16, 'controller' : 'fsmc',
+            'pin_d0' : 'D14',
+            'pin_d1' : 'D15',
+            'pin_d2' : 'D0',
+            'pin_d3' : 'D1',
+            'pin_d4' : 'E7',
+            'pin_d5' : 'E8',
+            'pin_d6' : 'E9',
+            'pin_d7' : 'E10',
+            'pin_d8' : 'E11',
+            'pin_d9' : 'E12',
+            'pin_d10' : 'E13',
+            'pin_d11' : 'E14',
+            'pin_d12' : 'E15',
+            'pin_d13' : 'D8',
+            'pin_d14' : 'D9',
+            'pin_d15' : 'D10',
+            'pin_rs' : 'D11',
+            'pin_rd' : 'D4',
+            'pin_wr' : 'D5',
+            'pin_cs' : 'D7', # CS / NE1
+            'pin_bl' : 'B15', # backlight
+            'pin_tearing' : 'D12' # tearing effect output from LCD controller - planned for PCB v0.7
+          },
+  'SPIFLASH' : {
+            'pin_cs' : 'B14',
+            'pin_sck' : 'B3',
+            'pin_mosi' : 'B5',
+            'pin_miso' : 'B4',
+            'size' : 4096*64,
+#           Don't enable the memory mapping - STM32 doesn't do this, but it does cause extra stuff to be added to jsvariterator which can slow it down
+#           'memmap_base' : 0x60000000 # map into the address space (in software) - FIXME: what should this address be?
+          },
+  'USB' : { 'pin_vsense' : 'A9', # PA5 for v0.3, PA9 for v0.5 and later
+            'pin_dm' : 'A11',
+            'pin_dp' : 'A12' },
+
+  'JTAG' : {
+        'pin_MS' : 'A13',
+        'pin_CK' : 'A14',
+          },
+};
+
+# left-right, or top-bottom order
+board = {
+};
+board["_css"] = """
+""";
+
+def get_pins():
+  pins = pinutils.scan_pin_file([], 'stm32f40x.csv', 6, 9, 10)
+  pins = pinutils.scan_pin_af_file(pins, 'stm32f405_af.csv', 0, 1) # F405 is close enough to the F407
+  pins = pinutils.only_from_package(pinutils.fill_gaps_in_pin_list(pins), chip["package"])
+  pinutils.findpin(pins, "PE4", True)["functions"]["NEGATED"]=0; # LED1
+  pinutils.findpin(pins, "PE5", True)["functions"]["NEGATED"]=0; # LED2
+  pinutils.findpin(pins, "PE6", True)["functions"]["NEGATED"]=0; # LED3
+  pinutils.findpin(pins, "PE3", True)["functions"]["NEGATED"]=0; # LED4
+  pinutils.findpin(pins, "PA1", True)["functions"]["NEGATED"]=0; # BTN1
+  pinutils.findpin(pins, "PE1", True)["functions"]["NEGATED"]=0; # BTN2
+  pinutils.findpin(pins, "PE2", True)["functions"]["NEGATED"]=0; # BTN3
+  pinutils.findpin(pins, "PA2", True)["functions"]["NEGATED"]=0; # BTN4
+  pinutils.findpin(pins, "PA10", True)["functions"]["NEGATED"]=0; # BTN5 - PA9 for v0.3, PA10 for v0.5 and later
+  pinutils.findpin(pins, "PA8", True)["functions"]["NEGATED"]=0; # BTN6
+  pinutils.findpin(pins, "PA3", True)["functions"]["NEGATED"]=0; # BTN7
+  pinutils.findpin(pins, "PB1", True)["functions"]["NEGATED"]=0; # BTN8
+  pinutils.findpin(pins, "PB0", True)["functions"]["NEGATED"]=0; # BTN9
+  pinutils.findpin(pins, "PA0", True)["functions"]["NEGATED"]=0; # BTN10
+  return pins
diff --git a/boards/PIPBOY_LINUX.py b/boards/PIPBOY_LINUX.py
@@ -0,0 +1,65 @@
+#!/bin/false
+# This file is part of Espruino, a JavaScript interpreter for Microcontrollers
+#
+# Copyright (C) 2013 Gordon Williams <[email protected]>
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# ----------------------------------------------------------------------------------------
+# This file contains information for a specific board - the available pins, and where LEDs,
+# Buttons, and other in-built peripherals are. It is used to build documentation as well
+# as various source and header files for Espruino.
+# ----------------------------------------------------------------------------------------
+
+import pinutils;
+info = {
+ 'name' : "Pipboy Linux Debug Compilation",
+ 'default_console' : "EV_USBSERIAL",
+ 'variables' :  5000, # 0 = resizable variables, rather than fixed
+ 'binary_name' : 'espruino_pb',
+ 'build' : {
+   'libraries' : [
+     'GRAPHICS','LCD_SDL',
+     'FILESYSTEM'
+   ],
+   'makefile' : [
+#     'DEFINES+=-DFLASH_64BITS_ALIGNMENT=1', # For testing 64 bit flash writes
+#     'CFLAGS+=-m32', 'LDFLAGS+=-m32', 'DEFINES+=-DUSE_CALLFUNCTION_HACK', # For testing 32 bit builds
+     'DEFINES+=-DLINUX -DEMULATED',
+     'DEFINES+=-DESPR_UNICODE_SUPPORT=1',
+     'DEFINES+=-DUSE_FONT_6X8 -DGRAPHICS_PALETTED_IMAGES -DGRAPHICS_ANTIALIAS -DESPR_PBF_FONTS -DESPR_GRAPHICS_INTERNAL -DESPR_GRAPHICS_SELF_INIT',
+     'DEFINES+=-DSPIFLASH_BASE=0 -DSPIFLASH_LENGTH=FLASH_SAVED_CODE_LENGTH', # For Testing Flash Strings
+     'LINUX=1',
+     'INCLUDE += -I$(ROOT)/libs/pipboy',
+     'WRAPPERSOURCES += libs/pipboy/avi.c libs/pipboy/stm32_i2s.c',
+     'WRAPPERSOURCES += libs/pipboy/jswrap_pipboy.c'     
+   ]
+ }
+};
+chip = {
+  'part' : "LINUX",
+  'family' : "LINUX",
+  'package' : "",
+  'ram' : 0,
+  'flash' : 256, # size of file used to fake flash memory (kb)
+  'speed' : -1,
+  'usart' : 6,
+  'spi' : 3,
+  'i2c' : 3,
+  'adc' : 0,
+  'dac' : 0
+};
+
+devices = {
+  'USB' : {}, # to convince code that we have a USB port (it's used for the console ion Linux)
+    'LCD' : {
+            'width' : 480, 'height' : 320, 'bpp' : 16, 'controller' : 'sdl'
+            }
+};
+
+def get_pins():
+  pins = pinutils.generate_pins(0,32)
+  # just fake pins D0 .. D32
+  return pins