feat: Support GDB debugging on ARM

Add support for debugging aarch64 with gdb

Signed-off-by: Jack Thomson <[email protected]>

src/vmm/src/arch/aarch64/regs.rs

@@ -99,6 +99,16 @@ arm64_sys_reg!(SYS_CNTV_CVAL_EL0, 3, 3, 14, 3, 2);
 // https://elixir.bootlin.com/linux/v6.8/source/arch/arm64/include/asm/sysreg.h#L459
 arm64_sys_reg!(SYS_CNTPCT_EL0, 3, 3, 14, 0, 1);
 
+// Translation Table Base Register
+// https://developer.arm.com/documentation/ddi0595/2021-03/AArch64-Registers/TTBR1-EL1--Translation-Table-Base-Register-1--EL1-
+arm64_sys_reg!(TTBR1_EL1, 3, 0, 2, 0, 1);
+// Translation Control Register
+// https://developer.arm.com/documentation/ddi0601/2024-09/AArch64-Registers/TCR-EL1--Translation-Control-Register--EL1-
+arm64_sys_reg!(TCR_EL1, 3, 0, 2, 0, 2);
+// AArch64 Memory Model Feature Register
+// https://developer.arm.com/documentation/100798/0400/register-descriptions/aarch64-system-registers/id-aa64mmfr0-el1--aarch64-memory-model-feature-register-0--el1
+arm64_sys_reg!(ID_AA64MMFR0_EL1, 3, 0, 0, 7, 0);
+
 /// Vector lengths pseudo-register
 /// TODO: this can be removed after https://github.com/rust-vmm/kvm-bindings/pull/89
 /// is merged and new version is used in Firecracker.

src/vmm/src/builder.rs

@@ -28,9 +28,6 @@ use vm_superio::Rtc;
 use vm_superio::Serial;
 use vmm_sys_util::eventfd::EventFd;
 
-#[cfg(all(feature = "gdb", target_arch = "aarch64"))]
-compile_error!("GDB feature not supported on ARM");
-
 #[cfg(target_arch = "x86_64")]
 use crate::acpi;
 use crate::arch::InitrdConfig;

src/vmm/src/gdb/arch/aarch64.rs

@@ -1,62 +1,309 @@
 // Copyright 2024 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 // SPDX-License-Identifier: Apache-2.0
 
+use std::mem::offset_of;
+
 use gdbstub_arch::aarch64::reg::AArch64CoreRegs as CoreRegs;
+use kvm_bindings::{
+    kvm_guest_debug, kvm_regs, user_pt_regs, KVM_GUESTDBG_ENABLE, KVM_GUESTDBG_SINGLESTEP,
+    KVM_GUESTDBG_USE_HW, KVM_GUESTDBG_USE_SW_BP, KVM_REG_ARM64, KVM_REG_ARM_CORE, KVM_REG_SIZE_U64,
+};
 use kvm_ioctls::VcpuFd;
-use vm_memory::GuestAddress;
+use vm_memory::{Bytes, GuestAddress};
 
+use crate::arch::aarch64::regs::{
+    arm64_core_reg_id, Aarch64RegisterVec, ID_AA64MMFR0_EL1, TCR_EL1, TTBR1_EL1,
+};
+use crate::arch::aarch64::vcpu::get_registers;
 use crate::gdb::target::GdbTargetError;
+use crate::Vmm;
+
+/// Configures the number of bytes required for a software breakpoint.
+///
+/// The breakpoint instruction operation also includes the immediate argument which we 0 hence the
+/// size.
+pub const SW_BP_SIZE: usize = 4;
+
+/// The bytes stored for a software breakpoint.
+///
+/// This is the BRK instruction with a 0 immediate argument.
+/// https://developer.arm.com/documentation/ddi0602/2024-09/Base-Instructions/BRK--Breakpoint-instruction-
+pub const SW_BP: [u8; SW_BP_SIZE] = [0, 0, 32, 212];
+
+/// Register id for the program counter
+const PC_REG_ID: u64 = arm64_core_reg_id!(KVM_REG_SIZE_U64, offset_of!(user_pt_regs, pc));
+
+/// Retrieve a single register from a Vcpu
+fn get_sys_reg(reg: u64, vcpu_fd: &VcpuFd) -> Result<u64, GdbTargetError> {
+    let mut register_vec = Aarch64RegisterVec::default();
+    get_registers(vcpu_fd, &[reg], &mut register_vec)?;
+    let register = register_vec
+        .iter()
+        .next()
+        .ok_or(GdbTargetError::ReadRegisterVecError)?;
+
+    Ok(register.value())
+}
+
+/// Gets the PC value for a Vcpu
+pub fn get_instruction_pointer(vcpu_fd: &VcpuFd) -> Result<u64, GdbTargetError> {
+    get_sys_reg(PC_REG_ID, vcpu_fd)
+}
 
-/// Configures the number of bytes required for a software breakpoint
-pub const SW_BP_SIZE: usize = 1;
+/// Helper to extract a specific number of bits at an offset from a u64
+macro_rules! extract_bits_64 {
+    ($value: tt, $offset: tt, $length: tt) => {
+        ($value >> $offset) & (!0u64 >> (64 - $length))
+    };
+}
+
+/// Mask to clear the last 3 bits from the page table entry
+const PTE_ADDRESS_MASK: u64 = !0b111u64;
 
-/// The bytes stored for a software breakpoint
-pub const SW_BP: [u8; SW_BP_SIZE] = [0];
+/// Read a u64 value from a guest memory address
+fn read_address(vmm: &Vmm, address: u64) -> Result<u64, GdbTargetError> {
+    let mut buf = [0; 8];
+    vmm.guest_memory().read(&mut buf, GuestAddress(address))?;
 
-/// Gets the RIP value for a Vcpu
-pub fn get_instruction_pointer(_vcpu_fd: &VcpuFd) -> Result<u64, GdbTargetError> {
-    unimplemented!()
+    Ok(u64::from_le_bytes(buf))
 }
 
-/// Translates a virtual address according to the vCPU's current address translation mode.
-pub fn translate_gva(_vcpu_fd: &VcpuFd, _gva: u64) -> Result<u64, GdbTargetError> {
-    unimplemented!()
+/// The grainsize used with 4KB paging
+const GRAIN_SIZE: usize = 9;
+
+/// Translates a virtual address according to the Vcpu's current address translation mode.
+/// Returns the GPA (guest physical address)
+///
+/// To simplify the implementation we've made some assumptions about the paging setup.
+/// Here we just assert firstly paging is setup and these assumptions are correct.
+pub fn translate_gva(vcpu_fd: &VcpuFd, gva: u64, vmm: &Vmm) -> Result<u64, GdbTargetError> {
+    // Check this virtual address is in kernel space
+    if extract_bits_64!(gva, 55, 1) == 0 {
+        return Err(GdbTargetError::GvaTranslateError);
+    }
+
+    // Translation control register
+    let tcr_el1: u64 = get_sys_reg(TCR_EL1, vcpu_fd)?;
+
+    // If this is 0 then translation is not yet ready
+    if extract_bits_64!(tcr_el1, 16, 6) == 0 {
+        return Ok(gva);
+    }
+
+    // Check 4KB pages are being used
+    if extract_bits_64!(tcr_el1, 30, 2) != 2 {
+        return Err(GdbTargetError::GvaTranslateError);
+    }
+
+    // ID_AA64MMFR0_EL1 provides information about the implemented memory model and memory
+    // management. Check this is a physical address size we support
+    let pa_size = match get_sys_reg(ID_AA64MMFR0_EL1, vcpu_fd)? & 0b1111 {
+        0 => 32,
+        1 => 36,
+        2 => 40,
+        3 => 42,
+        4 => 44,
+        5 => 48,
+        _ => return Err(GdbTargetError::GvaTranslateError),
+    };
+
+    // A mask of the physical address size for a virtual address
+    let pa_address_mask: u64 = !0u64 >> (64 - pa_size);
+    // A mask used to take the bottom 12 bits of a value this is as we have a grainsize of 9
+    // asserted with our 4kb page, plus the offset of 3
+    let lower_mask: u64 = 0xFFF;
+    // A mask for a physical address mask with the lower 12 bits cleared
+    let desc_mask: u64 = pa_address_mask & !lower_mask;
+
+    let page_indices = [
+        (gva >> (GRAIN_SIZE * 4)) & lower_mask,
+        (gva >> (GRAIN_SIZE * 3)) & lower_mask,
+        (gva >> (GRAIN_SIZE * 2)) & lower_mask,
+        (gva >> GRAIN_SIZE) & lower_mask,
+    ];
+
+    // Transition table base register used for initial table lookup.
+    // Take the bottom 48 bits from the register value.
+    let mut address: u64 = get_sys_reg(TTBR1_EL1, vcpu_fd)? & pa_address_mask;
+    let mut level = 0;
+
+    while level < 4 {
+        // Clear the bottom 3 bits from this address
+        let pte = read_address(vmm, (address + page_indices[level]) & PTE_ADDRESS_MASK)?;
+        address = pte & desc_mask;
+
+        // If this is a valid table entry and we aren't at the end of the page tables
+        // then loop again and check next level
+        if (pte & 2 != 0) && (level < 3) {
+            level += 1;
+            continue;
+        }
+        break;
+    }
+
+    // Generate a mask to split between the page table entry and the GVA. The split point is
+    // dependent on which level we terminate at. This is calculated by taking the level we
+    // hit multiplied by the grainsize then adding the 3 offset
+    let page_size = 1u64 << ((GRAIN_SIZE * (4 - level)) + 3);
+    // Clear bottom bits of page size
+    address &= !(page_size - 1);
+    address |= gva & (page_size - 1);
+    Ok(address)
 }
 
 /// Configures the kvm guest debug regs to register the hardware breakpoints
 fn set_kvm_debug(
-    _control: u32,
-    _vcpu_fd: &VcpuFd,
-    _addrs: &[GuestAddress],
+    control: u32,
+    vcpu_fd: &VcpuFd,
+    addrs: &[GuestAddress],
 ) -> Result<(), GdbTargetError> {
-    unimplemented!()
+    let mut dbg = kvm_guest_debug {
+        control,
+        ..Default::default()
+    };
+
+    for (i, addr) in addrs.iter().enumerate() {
+        // DBGBCR_EL1 (Debug Breakpoint Control Registers, D13.3.2):
+        // bit 0: 1 (Enabled)
+        // bit 1~2: 0b11 (PMC = EL1/EL0)
+        // bit 5~8: 0b1111 (BAS = AArch64)
+        // others: 0
+        dbg.arch.dbg_bcr[i] = 0b1 | (0b11 << 1) | (0b1111 << 5);
+        // DBGBVR_EL1 (Debug Breakpoint Value Registers, D13.3.3):
+        // bit 2~52: VA[2:52]
+        dbg.arch.dbg_bvr[i] = (!0u64 >> 11) & addr.0;
+    }
+
+    vcpu_fd.set_guest_debug(&dbg)?;
+
+    Ok(())
+}
+
+/// Bits in a Vcpu pstate for IRQ
+const IRQ_ENABLE_FLAGS: u64 = 0x80 | 0x40;
+/// Register id for pstate
+const PSTATE_ID: u64 = arm64_core_reg_id!(KVM_REG_SIZE_U64, offset_of!(user_pt_regs, pstate));
+
+/// Disable IRQ interrupts to avoid getting stuck in a loop while single stepping
+///
+/// When GDB hits a single breakpoint and resumes it will follow the steps:
+///  - Clear SW breakpoint we've hit
+///  - Single step
+///  - Re-insert the SW breakpoint
+///  - Resume
+/// However, with IRQ enabled the single step takes us into the IRQ handler so when we resume we
+/// immediately hit the SW breapoint we just re-inserted getting stuck in a loop.
+fn toggle_interrupts(vcpu_fd: &VcpuFd, enable: bool) -> Result<(), GdbTargetError> {
+    let mut pstate = get_sys_reg(PSTATE_ID, vcpu_fd)?;
+
+    if enable {
+        pstate |= IRQ_ENABLE_FLAGS;
+    } else {
+        pstate &= !IRQ_ENABLE_FLAGS;
+    }
+
+    vcpu_fd.set_one_reg(PSTATE_ID, &pstate.to_le_bytes())?;
+
+    Ok(())
 }
 
 /// Configures the Vcpu for debugging and sets the hardware breakpoints on the Vcpu
 pub fn vcpu_set_debug(
-    _vcpu_fd: &VcpuFd,
-    _addrs: &[GuestAddress],
-    _step: bool,
+    vcpu_fd: &VcpuFd,
+    addrs: &[GuestAddress],
+    step: bool,
 ) -> Result<(), GdbTargetError> {
-    unimplemented!()
+    let mut control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW | KVM_GUESTDBG_USE_SW_BP;
+    if step {
+        control |= KVM_GUESTDBG_SINGLESTEP;
+    }
+
+    toggle_interrupts(vcpu_fd, step)?;
+    set_kvm_debug(control, vcpu_fd, addrs)
 }
 
-/// Injects a BP back into the guest kernel for it to handle, this is particularly useful for the
-/// kernels selftesting which can happen during boot.
+/// KVM does not support injecting breakpoints on aarch64 so this is a no-op
 pub fn vcpu_inject_bp(
     _vcpu_fd: &VcpuFd,
     _addrs: &[GuestAddress],
     _step: bool,
 ) -> Result<(), GdbTargetError> {
-    unimplemented!()
+    Ok(())
 }
+/// The number of general purpose registers
+const GENERAL_PURPOSE_REG_COUNT: usize = 31;
+/// The number of core registers we read from the Vcpu
+const CORE_REG_COUNT: usize = 33;
+/// Stores the register ids of registers to be read from the Vcpu
+const CORE_REG_IDS: [u64; CORE_REG_COUNT] = {
+    let mut regs = [0; CORE_REG_COUNT];
+    let mut idx = 0;
+
+    let reg_offset = offset_of!(kvm_regs, regs);
+    let mut off = reg_offset;
+    while idx < GENERAL_PURPOSE_REG_COUNT {
+        regs[idx] = arm64_core_reg_id!(KVM_REG_SIZE_U64, off);
+        idx += 1;
+        off += std::mem::size_of::<u64>();
+    }
+
+    regs[idx] = arm64_core_reg_id!(KVM_REG_SIZE_U64, offset_of!(user_pt_regs, sp));
+    idx += 1;
+
+    regs[idx] = arm64_core_reg_id!(KVM_REG_SIZE_U64, offset_of!(user_pt_regs, pc));
+    regs
+};
 
 /// Reads the registers for the Vcpu
-pub fn read_registers(_vcpu_fd: &VcpuFd, _regs: &mut CoreRegs) -> Result<(), GdbTargetError> {
-    unimplemented!()
+pub fn read_registers(vcpu_fd: &VcpuFd, regs: &mut CoreRegs) -> Result<(), GdbTargetError> {
+    let mut register_vec = Aarch64RegisterVec::default();
+    get_registers(vcpu_fd, &CORE_REG_IDS, &mut register_vec)?;
+
+    let mut registers = register_vec.iter();
+
+    for i in 0..GENERAL_PURPOSE_REG_COUNT {
+        regs.x[i] = registers
+            .next()
+            .ok_or(GdbTargetError::ReadRegisterVecError)?
+            .value();
+    }
+
+    regs.sp = registers
+        .next()
+        .ok_or(GdbTargetError::ReadRegisterVecError)?
+        .value();
+
+    regs.pc = registers
+        .next()
+        .ok_or(GdbTargetError::ReadRegisterVecError)?
+        .value();
+
+    Ok(())
 }
 
 /// Writes to the registers for the Vcpu
-pub fn write_registers(_vcpu_fd: &VcpuFd, _regs: &CoreRegs) -> Result<(), GdbTargetError> {
-    unimplemented!()
+pub fn write_registers(vcpu_fd: &VcpuFd, regs: &CoreRegs) -> Result<(), GdbTargetError> {
+    let kreg_off = offset_of!(kvm_regs, regs);
+    let mut off = kreg_off;
+    for i in 0..GENERAL_PURPOSE_REG_COUNT {
+        vcpu_fd.set_one_reg(
+            arm64_core_reg_id!(KVM_REG_SIZE_U64, off),
+            &regs.x[i].to_le_bytes(),
+        )?;
+        off += std::mem::size_of::<u64>();
+    }
+
+    let off = offset_of!(user_pt_regs, sp);
+    vcpu_fd.set_one_reg(
+        arm64_core_reg_id!(KVM_REG_SIZE_U64, off + kreg_off),
+        &regs.sp.to_le_bytes(),
+    )?;
+
+    let off = offset_of!(user_pt_regs, pc);
+    vcpu_fd.set_one_reg(
+        arm64_core_reg_id!(KVM_REG_SIZE_U64, off + kreg_off),
+        &regs.pc.to_le_bytes(),
+    )?;
+
+    Ok(())
 }

src/vmm/src/gdb/arch/x86.rs

@@ -8,6 +8,7 @@ use vm_memory::GuestAddress;
 
 use crate::gdb::target::GdbTargetError;
 use crate::logger::error;
+use crate::Vmm;
 
 /// Sets the 9th (Global Exact Breakpoint enable) and the 10th (always 1) bits for the DR7 debug
 /// control register
@@ -30,11 +31,11 @@ pub fn get_instruction_pointer(vcpu_fd: &VcpuFd) -> Result<u64, GdbTargetError>
 }
 
 /// Translates a virtual address according to the vCPU's current address translation mode.
-pub fn translate_gva(vcpu_fd: &VcpuFd, gva: u64) -> Result<u64, GdbTargetError> {
+pub fn translate_gva(vcpu_fd: &VcpuFd, gva: u64, _vmm: &Vmm) -> Result<u64, GdbTargetError> {
     let tr = vcpu_fd.translate_gva(gva)?;
 
     if tr.valid == 0 {
-        return Err(GdbTargetError::KvmGvaTranslateError);
+        return Err(GdbTargetError::GvaTranslateError);
     }
 
     Ok(tr.physical_address)