Skip to content

Commit

Permalink
Fixed print from SD/USB
Browse files Browse the repository at this point in the history 
- Disabled ADVANCED_OK
- Enabled ABL_BILINEAR_SUBDIVISION
- Enabled ARC_P_CIRCLES
- Reenabled SDSUPPORT
  • Loading branch information
@freakydude
freakydude committed Jun 13, 2022
1 parent ca0c380 commit 224a634
Show file tree
Hide file tree
Showing 2 changed files with 19 additions and 19 deletions.
20 changes: 10 additions & 10 deletions Marlin/Configuration.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -71,7 +71,7 @@
// @section info

// Author info of this build printed to the host during boot and M115
#define STRING_CONFIG_H_AUTHOR "FreakyDude" // Who made the changes.
#define STRING_CONFIG_H_AUTHOR "freakyDude" // Who made the changes.
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)

/**
Expand Down Expand Up @@ -123,7 +123,7 @@
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
#define BAUDRATE 250000
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate

/**
* Select a secondary serial port on the board to use for communication with the host.
Expand Down Expand Up @@ -1012,7 +1012,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 460 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 445 }

/**
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
Expand Down Expand Up @@ -1685,8 +1685,8 @@
*/
//#define PREHEAT_BEFORE_LEVELING
#if ENABLED(PREHEAT_BEFORE_LEVELING)
#define LEVELING_NOZZLE_TEMP 200 // (°C) Only applies to E0 at this time
#define LEVELING_BED_TEMP 65
#define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
#define LEVELING_BED_TEMP 50
#endif

/**
Expand Down Expand Up @@ -1751,7 +1751,7 @@
// Experimental Subdivision of the grid by Catmull-Rom method.
// Synthesizes intermediate points to produce a more detailed mesh.
//
//#define ABL_BILINEAR_SUBDIVISION
#define ABL_BILINEAR_SUBDIVISION
#if ENABLED(ABL_BILINEAR_SUBDIVISION)
// Number of subdivisions between probe points
#define BILINEAR_SUBDIVISIONS 3
Expand Down Expand Up @@ -2236,14 +2236,14 @@
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
//#define SDSUPPORT
#define SDSUPPORT

/**
* SD CARD: ENABLE CRC
*
* Use CRC checks and retries on the SD communication.
*/
//#define SD_CHECK_AND_RETRY
#define SD_CHECK_AND_RETRY

/**
* LCD Menu Items
Expand Down Expand Up @@ -2975,13 +2975,13 @@
// However, control resolution will be halved for each increment;
// at zero value, there are 128 effective control positions.
// :[0,1,2,3,4,5,6,7]
//#define SOFT_PWM_SCALE 2
#define SOFT_PWM_SCALE 2

// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
// be used to mitigate the associated resolution loss. If enabled,
// some of the PWM cycles are stretched so on average the desired
// duty cycle is attained.
//#define SOFT_PWM_DITHER
#define SOFT_PWM_DITHER

// Temperature status LEDs that display the hotend and bed temperature.
// If all hotends, bed temperature, and target temperature are under 54C
Expand Down
18 changes: 9 additions & 9 deletions Marlin/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1411,7 +1411,7 @@
#endif

#if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
#define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
Expand Down Expand Up @@ -1545,7 +1545,7 @@

#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu

#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)

/**
* Abort SD printing when any endstop is triggered.
Expand All @@ -1556,7 +1556,7 @@
//#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S<seconds>'
//#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S<seconds>'
/**
* Support for USB thumb drives using an Arduino USB Host Shield or
Expand Down Expand Up @@ -2193,7 +2193,7 @@
#define MIN_CIRCLE_SEGMENTS 72 // Minimum number of segments in a complete circle
//#define ARC_SEGMENTS_PER_SEC 50 // Use the feedrate to choose the segment length
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure
#endif

Expand Down Expand Up @@ -2287,7 +2287,7 @@
// The number of linear moves that can be in the planner at once.
// The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g., 8, 16, 32)
#if BOTH(SDSUPPORT, DIRECT_STEPPING)
#define BLOCK_BUFFER_SIZE 64
#define BLOCK_BUFFER_SIZE 8
#elif ENABLED(SDSUPPORT)
#define BLOCK_BUFFER_SIZE 64
#else
Expand Down Expand Up @@ -2374,7 +2374,7 @@
//#define NO_TIMEOUTS 1000 // Milliseconds

// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK
//#define ADVANCED_OK

// Printrun may have trouble receiving long strings all at once.
// This option inserts short delays between lines of serial output.
Expand Down Expand Up @@ -2468,7 +2468,7 @@
* Retract and prime filament on tool-change to reduce
* ooze and stringing and to get cleaner transitions.
*/
//#define TOOLCHANGE_FILAMENT_SWAP
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
// Load / Unload
#define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length
Expand Down Expand Up @@ -4127,8 +4127,8 @@
#if ENABLED(HOST_PROMPT_SUPPORT)
#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
#endif
#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
#endif

/**
Expand Down

0 comments on commit 224a634

Please sign in to comment.