V5.3.0

It's the "Next Stop, Halloween" release! As you'll see this is a MASSIVE update to introduce new products available with kits and to refine behaviors and effects to be more accurate. So for very obvious reasons you should plan to update ALL of your devices (pack, wand, and attenuator/esp32) as well as both microSD cards in your system.

Please read over the list of changes so you can be familiar with what has changed:
-Added support for Frutto Inner Cyclotron Switch Panel
-Added support for Inner cyclotron Cake 26-LED and 36-LED NeoPixel Rings
-Added sound effect for wand sync operation
-1984/1989 Cyclotron speed changed to match the films
-1984/1989 Power Cell speed changed to match the films
-1984 Proton Pack startup and idle sounds updated using Sony masters
-1984 proton stream sounds completely overhauled from scratch to match film
-1989 proton stream sounds and colors updated to match film
-Afterlife proton stream end sounds updated to match film
-Afterlife pack startup sound effect no longer includes switch noise as we play the switch sound separately
-All Frozen Empire sound effects updated
-Attenuator/Wifi Module base firmware updated for enhanced reliability
-Attenuator/Wifi Module now have integrated DNS to make accessing the web interface easier (see documentation)
-Changed quick vent smoke duration to be half the normal overheat duration or 2 seconds (whichever is longer)
-Decreased total supported LEDs for Inner Cyclotron Cavity from 30 to 20
-Fixed crackling sound on GPStar Audio when "brass pack" sounds played
-Fixed incorrect Cyclotron speed if starting/restarting pack in Slime mode then switching to any other firing mode
-Fixed incorrect Power Cell update speeds being set the first time the LED count was changed via the wand menu system
-Fixed incorrect Proton Stream mode change if a pack without a wand attached was commanded by an Attenuator to change operating modes
-Fixed ion arm switch able to be out of position if Talentcell battery was turned on while ion arm switch was already on
-Fixed jarring beep sounds in Afterlife/Frozen Empire when changing wand power level
-Fixed missing GB2 wand bootup sound if wand is configured to have pack play its audio instead
-Fixed missing ion switch sound when switch was not being used to boot up the pack
-Fixed missing proton stream end variations on wand
-Fixed missing vibration and vent light changes when firing semi-automatic video game modes
-Fixed overlapping audio prompts when changing between Mode Super Hero and Mode Original via the wand menu system
-Fixed pack getting stuck in a loop when button mashing lockout is triggered
-Fixed pack "Power-On Self Test" sequence causing the wand to believe it was having connection issues
-Fixed Power Cell sound in Afterlife/Frozen Empire not always turning off during ribbon cable errors or overheating as it should
-Fixed several redundant audio calls when booting up or shutting down the wand and pack
-Fixed several erroneous audio calls when starting and stopping CTS firing while in CTS Mix mode
-Fixed slime blower causing vent light to increase brightness while being fired as it is not an energy stream
-Fixed smoke sound effect randomizer for overheating
-Fixed standalone wand not switching out of VG mode when switching to Mode Original
-Made it so in Afterlife, starting from the ion arm switch is the "full" startup sequence while starting from the wand or restarting from an error state has a short startup sequence
-Made it so ONLY the Proton Pack plays music (standalone wands can still play music)
-Updated documentation (including new DIY options for wands using a replacement for the Arduino Nano!)
-Updated 3D print files, specifically for Spirit packs