Skip to content

Commit

Permalink
New translations installing-boot9strap-(mset9-play-store).md (Croatian)
Browse files Browse the repository at this point in the history
  • Loading branch information
@ihaveamac
ihaveamac committed Dec 9, 2024
1 parent b6fb11b commit 62cade4
Showing 1 changed file with 52 additions and 31 deletions.
83 changes: 52 additions & 31 deletions docs/hr_HR/installing-boot9strap-(mset9-play-store).md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -34,19 +34,9 @@ On Android phones/tablets, the minimum Android version required is 6.0 (Marshmal

In this section, you will prepare the SD card data necessary for the MSET9 exploit to trigger.

1. Power on your console **with your SD card inserted**
1. Insert your SD card into your phone/tablet/computer

2. Open Mii Maker

3. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
- You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
- If you just reach the normal Mii Maker screen, exit Mii Maker and continue to the next step

4. Power off your console

5. Insert your SD card into your phone/tablet/computer

6. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files:
2. Copy everything from the Release `.zip` to the root of your SD card, overwriting any existing files:

- Open ZArchiver
- If prompted, [allow ZArchiver to access files on your SD card](/images/screenshots/mset9/zarchiver-allow.png)
Expand All @@ -60,19 +50,51 @@ In this section, you will prepare the SD card data necessary for the MSET9 explo

:::

7. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png)
3. Run the [MSET9 Installer application](/images/screenshots/mset9/mset9-setup-android.png)

4. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png))

5. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png))

6. If `Setup MSET9` is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), proceed to the next step
- If you get an error, you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting-mset9)

7. Tap on `Setup MSET9` to begin the process of setting up MSET9

8. Tap on `Select "Nintendo 3DS" Folder`, then navigate to your `Nintendo 3DS` folder on your SD card ([image](/images/screenshots/mset9/select-mset9-folder-1.png))
8. After reviewing the disclaimer, tap on `Confirm` to accept it

9. Once inside the `Nintendo 3DS` folder, tap on "Use this folder", then "Allow" if asked ([image](/images/screenshots/mset9/select-mset9-folder-2.png))
9. Tap on the photo corresponding to your console model, then at the bottom, pick your current firmware version

10. If "Setup MSET9" is [highlighted](/images/screenshots/mset9/setup-mset9-highlighted.png), proceed to the next step. **Do not setup MSET9 yet.** Close the MSET9 Installer for now
- If "Check Again" is highlighted, there is a problem that you need to resolve before you can use MSET9. Refer to the [troubleshooting](troubleshooting-mset9)
10. If you see the prompt of `Hax ID1 Created`, tap OK to continue
- If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again
- Your 3DS will appear to lose most data / no user-installed apps on HOME Menu. This is expected. Your data will come back at a later step

11. Reinsert your SD card into your console

12. Power on your console

13. Open Mii Maker

14. Wait for your console to reach the "Welcome to Mii Maker" screen, then exit Mii Maker
- You may see [this screen](/images/screenshots/mset9/mii-extdata.png), which indicates the necessary data has been created
- If you just reach the normal Mii Maker screen, exit Mii Maker and return to the HOME Menu

15. Launch System Settings and navigate to `Data Management` -> `Nintendo 3DS` -> `Software` -> Reset ([image](/images/screenshots/database-reset.jpg))
- This will not wipe any of your data

16. Power off your console by pressing the power button then tapping Power Off on the lower screen

17. Insert your SD card into your phone/tablet/computer

18. The MSET9 Installer application should automatically check if you have done previous steps properly
- It may take a few seconds for the app to detect the SD card and react
- If it doesn't check automatically, tap `Check MSET9 status` to check manually
- If you get an error, check the [troubleshooting](troubleshooting-mset9), then try again

19. If the check passed, you'll see `Inject trigger file` become [highlighted](/images/screenshots/mset9/inject-trigger-highlighted.png) and you can continue to the next step. **Do not inject trigger yet.** Put your phone/tablet/computer aside for now

20. Reinsert your SD card into your console

### Section II - MSET9

In this section, you will trigger MSET9 to launch SafeB9SInstaller (the custom firmware installer).
Expand All @@ -83,20 +105,19 @@ These instructions must be followed **EXACTLY**, so double-check EVERYTHING you

:::

1. **[Hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad (do not select it yet)
2. Power off, then power on your console
3. Press (A) to launch System Settings
4. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
5. **Do not press any buttons or touch the screen**
6. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
1. Power on your console, ensuring System Settings is selected
- If System Settings is not selected, **[hover over](/images/screenshots/mset9/hover-settings.png)** the System Settings icon using the D-Pad, power your console off, then back on
2. Press (A) to launch System Settings
3. Navigate to `Data Management` -> `Nintendo 3DS` -> `Extra Data` ([image](/images/screenshots/mset9/settings-extdata.png))
4. **Do not press any buttons or touch the screen**
5. **With the console STILL ON, and without pressing any buttons or touching the screen**, remove your SD card from your console
- The menu will refresh and say that no SD card is inserted, which is expected
7. Insert your SD card into your phone/tablet/computer
8. Open the MSET9 Installer application
9. Tap "Setup MSET9"
10. Tap on the photo corresponding to your console model, then on the button corresponding to your current firmware version
- If the injection was successful, all buttons should become grayed out except for "Remove MSET9"
11. Reinsert your SD card into your console **without pressing any buttons or touching the screen**
12. If the exploit was successful, you will have booted into SafeB9SInstaller
6. Insert your SD card into your phone/tablet/computer
7. Open the MSET9 Installer application
8. Tap `Inject trigger file`
- The button should become greyed out and `Remove trigger file` become [highlighted](/images/screenshots/mset9/remove-trigger-highlighted.png)
9. Reinsert your SD card into your console **without pressing any buttons or touching the screen**
10. If the exploit was successful, you will have booted into SafeB9SInstaller
- If you get a red screen or the console gets stuck on a loading screen, follow the [troubleshooting guide](troubleshooting-mset9)

### Section III - Installing boot9strap
Expand All @@ -122,7 +143,7 @@ Do NOT skip this section! If you skip it, applications may crash unexpectedly an
1. Power off your console
2. Insert your SD card into your phone/tablet/computer
3. Open the MSET9 Installer application
4. Tap "Remove MSET9"
4. Tap `Remove MSET9`
5. Close the MSET9 Installer application

<!--@include: ./_include/luma3ds-installed-note.md -->
Expand Down

0 comments on commit 62cade4

Please sign in to comment.