treewide: eradicate image alternative names

This may break users that are possibly on Internet Explorer or
something, but I don't know.

It *is* a translation burden, on the other hand, and largely
unnecessary.

_pages/en_US/404.md

@@ -5,7 +5,7 @@ excerpt: "Page not found. Your pixels are in another canvas."
 sitemap: false
 ---
 
-![404](/images/main-pages/Wii_Red_404.jpg)
+![](/images/main-pages/Wii_Red_404.jpg)
 
 Sorry, but the page you were trying to view does not exist.
 {: .notice--warning}

_pages/en_US/bluebomb.md

@@ -48,7 +48,7 @@ Make sure that the console is close to the computer running the exploit, ideally
 1. Take note in the top right corner of the letter next to the system version.
     + This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
 
-    ![Wii Region](/images/wii/SystemMenuVersion.png)
+    ![](/images/wii/SystemMenuVersion.png)
 
 1. Power off your console.
 1. Start your Linux distro, and ensure you are connected to the internet.

_pages/en_US/bootmii.md

@@ -34,26 +34,26 @@ If you have BootMii installed as boot2, you will need to launch BootMii by resta
 1. Launch the Homebrew Channel.
 1. Press the HOME Button, then select "Launch BootMii".
 
-    ![BootMii_Main](/images/bootmii/BootMii_Main.png)
+    ![](/images/bootmii/BootMii_Main.png)
 
 1. Select the Options button (the icon with the gears).
 
-    ![BootMii_Gears_Icon](/images/bootmii/BootMii_Gears_Icon.png)
+    ![](/images/bootmii/BootMii_Gears_Icon.png)
 
 1. Select the first button to the left.
     + A NAND backup will start. You can watch the progress on the screen.
     + "Bad Blocks" are normal, and mostly originate from the factory due to NAND binning. Don't worry when you see some on a NAND backup.
     + After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
 
-    ![BootMii_Green_Arrow](/images/bootmii/BootMii_Green_Arrow.png)
+    ![](/images/bootmii/BootMii_Green_Arrow.png)
 
 1. When the process is complete, exit the NAND backup screen by pressing any button.
 
-    ![BootMii_NAND_Backup](/images/bootmii/BootMii_NAND_Backup.png)
+    ![](/images/bootmii/BootMii_NAND_Backup.png)
 
 1. Press the Back button (the one with an arrow), then press either the Wii Menu button or the Homebrew Channel button to exit BootMii.
 
-    ![BootMii_Return_Arrow](/images/bootmii/BootMii_Return_Arrow.png)
+    ![](/images/bootmii/BootMii_Return_Arrow.png)
 
 <div id="restore-notice" class="notice" markdown="1">
 Note: **restoring a NAND backup is usually a last resort**. There often better ways to unbrick your console.

_pages/en_US/bootmiirecover.md

@@ -45,11 +45,11 @@ If you want to restore a game's save data, use Dolphin to import your NAND backu
 1. Press the HOME Button, then select "Launch BootMii".
 1. Select the Options button (the icon with the gears).
 
-    ![BootMii_Gears_Icon](/images/BootMii/BootMii_Gears_Icon.png)
+    ![](/images/BootMii/BootMii_Gears_Icon.png)
 
 1. Select the RestoreMii button.
 
-    ![BootMii_Red_Arrow](/images/BootMii/BootMii_Red_Arrow.png)
+    ![](/images/BootMii/BootMii_Red_Arrow.png)
 
 1. If BootMii is installed as IOS, input the Konami code on your GameCube controller: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
 1. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.

_pages/en_US/bricks.md

@@ -71,7 +71,7 @@ When navigating to Wii Settings, you instead get an error from the Opera web bro
 #### Cause
 A semibrick occurs when a different region Wii Menu or a different region custom theme is installed. As the Wii Settings menu is rendered using HTML pages with Opera, themes often replace these pages and put them in different directories; essentially leading to a `404 Not Found` error but in the form of a console brick.
 
-![Semibrick](/images/bricks/semibrick.png)
+![](/images/bricks/semibrick.png)
 
 #### Solutions
 Verify in AnyRegion Changer that your console region is the same as the theme or Wii Menu that you have installed.
@@ -90,7 +90,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
 #### Symptoms
 Attempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. This happened after installing a WAD and rebooting, or returning to the Wii Menu. Alternatively, the Wii Menu can still be accessed, but opening the corrupt channel results in the console freezing. In some cases, you may see the "System files are corrupted" screen.
 
-![System files are corrupted](/images/bricks/sysfiles-corrupted.jpg)
+![](/images/bricks/sysfiles-corrupted.jpg)
 
 #### Cause
 Banner bricks occur if you install a WAD file that has an invalid Wii Menu banner or icon.
@@ -137,7 +137,7 @@ This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF
 
 However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region Wii Menu or theme, the Wii cannot find them.
 
-![Wii menu brick](/images/bricks/sysmenu-brick.png)
+![](/images/bricks/sysmenu-brick.png)
 
 #### Solutions
 
@@ -155,7 +155,7 @@ Screen shows up as listed below on normal boot.
 `Error:003`<br>
 `unauthorized device has been detected.`<br>
 
-![Error 003](/images/bricks/error-003.png)
+![](/images/bricks/error-003.png)
 
 #### Cause
 When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While obviously this failed, they also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. If this check succeeds, the error triggers and the Wii is effectively bricked.

_pages/en_US/cios.md

@@ -45,7 +45,7 @@ If you are not on Windows, you may download & run [this script](/assets/files/d2
     + This must be the same device containing the d2x cIOS Installer.
 
 The WAD files should be on your SD card like this:
-![offline IOS files](/images/cios/d2x_offline_ios.png)
+![](/images/cios/d2x_offline_ios.png)
 {: .notice--info}
 
 #### Section II - Installing
@@ -73,7 +73,7 @@ On each cIOS that you try to install, you will first be shown a grid of active I
         Select cIOS version <65535>
         ```
 
-        ![Install cIOS 248](/images/cios/d2x_v11_248.png)
+        ![](/images/cios/d2x_v11_248.png)
 
     + cIOS 249 Installation
 
@@ -84,7 +84,7 @@ On each cIOS that you try to install, you will first be shown a grid of active I
         Select cIOS version <65535>
         ```
 
-        ![Install cIOS 249](/images/cios/d2x_v11_249.png)
+        ![](/images/cios/d2x_v11_249.png)
 
     + cIOS 250 Installation
 
@@ -95,7 +95,7 @@ On each cIOS that you try to install, you will first be shown a grid of active I
         Select cIOS version <65535>
         ```
 
-        ![Install cIOS 250](/images/cios/d2x_v11_250.png)
+        ![](/images/cios/d2x_v11_250.png)
 
     + cIOS 251 Installation
 
@@ -106,7 +106,7 @@ On each cIOS that you try to install, you will first be shown a grid of active I
         Select cIOS version <65535>
         ```
 
-        ![Install cIOS 251](/images/cios/d2x_v11_251.png)
+        ![](/images/cios/d2x_v11_251.png)
 
 Continue to [Open Shop Channel Installation](osc)
 Now that your Wii has adequate brick protection, you can install the Open Shop Channel, a trusted repository for homebrew that can be accessed both on and off the Wii.

_pages/en_US/dump-games.md

@@ -27,28 +27,28 @@ If you are dumping one of the 13 games on [this list](https://wiki.dolphin-emu.o
 1. Launch CleanRip from the list of homebrew.
 1. Select your device that you will be dumping the game to - a USB device or SD card.
 
-    ![Device type](/images/homebrew/CleanRip/2.png)
+    ![](/images/homebrew/CleanRip/2.png)
 
 1. When prompted, select `Yes` to download the redump.org DAT files.
     + This is required to ensure that the resulting dumps are clean/accurate.
 
     You may get an exception error if you do this. If so, simply skip and verify your dump on Dolphin Emulator if needed.
     {: .notice--warning}
 
-    ![DAT](/images/homebrew/CleanRip/3.png)
+    ![](/images/homebrew/CleanRip/3.png)
 
 1. Insert the game disc you would like to dump.
 
-    ![DVD](/images/homebrew/CleanRip/4.png)
+    ![](/images/homebrew/CleanRip/4.png)
 
 1. Set the settings as shown on the screen below, while verifying if your game disc is dual layer or not.
 
-    ![Settings](/images/homebrew/CleanRip/6.png)
+    ![](/images/homebrew/CleanRip/6.png)
 
 1. Press A to start dumping the disc.
     + This process can take quite some time, since it will dump the full 4.7 GB disc contents (8.5 GB for dual layer discs).
 
-    ![Copying](/images/homebrew/CleanRip/7.png)
+    ![](/images/homebrew/CleanRip/7.png)
 
 1. Proceed to [joining PART files](dump-games#joining-part-files-on-a-fat32-device).
 
@@ -75,21 +75,21 @@ Your Wii and your computer must be connected to the same local network.
 1. Press right on the D-pad, then press A.
 1. Choose the disc that you want to copy (The options are: `GameCube Disc`, `Wii Single-Layer Disc`, `Wii Dual-Layer Disc`) and press "A"
 
-    ![2](/images/homebrew/DumpDiscs_LAN/2.png)
+    ![](/images/homebrew/DumpDiscs_LAN/2.png)
 1. Insert the game disc into your Wii.
     + If it is already inserted, eject and reinsert the disc.
 
-    ![InsertTheDisc](/images/homebrew/DumpDiscs_LAN/insertthedisc.jpg)
+    ![](/images/homebrew/DumpDiscs_LAN/insertthedisc.jpg)
 1. Select the proper disc type.
 
-    ![3](/images/homebrew/DumpDiscs_LAN/3.png)
+    ![](/images/homebrew/DumpDiscs_LAN/3.png)
 1. Press any button to begin the dumping process.
 
-    ![4](/images/homebrew/DumpDiscs_LAN/4.png)
+    ![](/images/homebrew/DumpDiscs_LAN/4.png)
 1. Remember or write down your Wii's URL (IP address).
 1. On your computer, open the browser, go to your address bar and enter the Wii URL.
 
-    ![5](/images/homebrew/DumpDiscs_LAN/5.png)
+    ![](/images/homebrew/DumpDiscs_LAN/5.png)
 1. Click on `Click here to download XXXX.iso`.
 1. Proceed to [joining PART files](dump-games#joining-part-files-on-a-fat32-device).
 

_pages/en_US/dump-wads.md

@@ -21,15 +21,15 @@ This guide will show you how to dump WADs from your Wii System Memory.
 1. Launch Yet Another BlueDump MOD from the list of homebrew.
 1. Press A.
 
-    ![Press A](/images/homebrew/DumpWADS/1.png)
+    ![](/images/homebrew/DumpWADS/1.png)
 
 1. Select `Installed Channel Titles`.
 
-    ![Installed Channel Titles](/images/homebrew/DumpWADS/2.png)
+    ![](/images/homebrew/DumpWADS/2.png)
 
 1. Find the content you want to dump and press the 1 Button.
 
-    ![Find channel](/images/homebrew/DumpWADS/3.png)
+    ![](/images/homebrew/DumpWADS/3.png)
 
 1. Select `Backup to WAD`.
 1. At the prompt to `Fakesign the ticket`, select `Yes`.
@@ -38,4 +38,4 @@ This guide will show you how to dump WADs from your Wii System Memory.
 
 The WAD has now been dumped, and should appear at the specified directory on your SD card.
 
-![Done](/images/homebrew/DumpWADS/4.png)
+![](/images/homebrew/DumpWADS/4.png)

_pages/en_US/flashhax.md

@@ -18,17 +18,17 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann
 1. Power on your console.
 1. Launch the Internet Channel.
 
-    ![Internet Channel Wii Menu](/images/exploits/flashhax/internet-channel-start.png)
+    ![](/images/exploits/flashhax/internet-channel-start.png)
 
 1. Go to `flashhax.com`.
 1. Select the correct region for your console.
 
-    ![Flashhax Region Select](/images/exploits/flashhax/select-region.png)
+    ![](/images/exploits/flashhax/select-region.png)
 
 1. Press the star button to open the bookmark tab.
 1. Select `Add Favorite`.
 
-    ![Bookmark Flashhax](/images/exploits/flashhax/bookmark-page.png)
+    ![](/images/exploits/flashhax/bookmark-page.png)
 
 
 #### Section II - FlashHax
@@ -37,7 +37,7 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann
 1. Wait a while
     + It may take some time as it is downloading the installer over the Internet.
 
-    ![Downloading Flashhax](/images/exploits/flashhax/wait-for-download.png)
+    ![](/images/exploits/flashhax/wait-for-download.png)
 
 1. If the exploit was successful, your device will have loaded the HackMii Installer.
     + This may take multiple tries.

_pages/en_US/gcsaves.md

@@ -36,19 +36,19 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
 1. Insert your physical memory card into Slot A or Slot B.
 1. Select the device you want to restore from.
 
-    ![Device](/images/homebrew/gcsaves/gcmm-select-device.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-device.jpg)
 
 1. In GCMM, Press X on a GameCube controller or + on a Wii remote.
 
-    ![Menu](/images/homebrew/gcsaves/gcmm-menu.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-menu.jpg)
 
 1. Select the slot your memory card is in.
 
-    ![Memory](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
 
 1. Select the save you want to restore. If you have multiple saves to restore, you can press R on the GameCube controller or 1 on the Wii remote to restore all of your saves.
 
-    ![Save](/images/homebrew/gcsaves/gcmm-select-save.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-save.jpg)
 
 1. When restoration is complete, press any button to continue.
 
@@ -73,19 +73,19 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
 1. Insert your physical memory card into slot A or slot B.
 1. Select the device you want to backup to.
 
-    ![Device](/images/homebrew/gcsaves/gcmm-select-device.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-device.jpg)
 
 1. In GCMM, Press Y on a GameCube controller or - on a Wii remote.
 
-    ![Menu](/images/homebrew/gcsaves/gcmm-menu.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-menu.jpg)
 
 1. Select the slot your memory card is in.
 
-    ![Memory](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
 
 1. Select the save you want to backup. If you have multiple saves to backup, you can press R on the GameCube controller or 1 on the Wii remote to backup all of your saves.
 
-    ![Save](/images/homebrew/gcsaves/gcmm-select-save.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-save.jpg)
 
 1. When backing up is complete, press any button to continue.
 
@@ -109,11 +109,11 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
 1. Insert your memory card into Slot A or Slot B.
 1. Select the device you want to dump to.
 
-    ![Device](/images/homebrew/gcsaves/gcmm-select-device.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-device.jpg)
 
 1. Press L and Y at the same time on GameCube Controller or B and - at the same time on the Wii remote to backup your to a .raw file and select the slot your memory card is in.
 
-    ![Memory](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
 
 1. When the dump is complete, press any button to continue. It should be saved in a folder on the root of your SD or USB called `MCBACKUP`.
 
@@ -132,12 +132,12 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
 1. Insert your memory card into Slot A or Slot B.
 1. Select the device you want to restore from.
 
-    ![Device](/images/homebrew/gcsaves/gcmm-select-device.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-select-device.jpg)
 
 1. Press L and X at the same time on GameCube controller or B and + at the same time on the Wii remote.
 1. Select the slot your memory card is in.
 
-    ![Memory](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
+    ![](/images/homebrew/gcsaves/gcmm-mem-select.jpg)
 
 1. It should restore the .raw file to your memory card. When restoration is complete, press any button to continue.
 
@@ -153,13 +153,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
 1. Insert both memory cards into the Wii.
 1. From the System menu, navigate into `Wii Options`, `Data Management`, `Save Data`, `Nintendo GameCube`.
 
-    ![sysmenu](/images/homebrew/gcsaves/sysmenu.jpg) <br>
+    ![](/images/homebrew/gcsaves/sysmenu.jpg) <br>
 
-    ![settings](/images/homebrew/gcsaves/settings.jpg) <br>
+    ![](/images/homebrew/gcsaves/settings.jpg) <br>
 
-    ![data management](/images/homebrew/gcsaves/data-management.jpg) <br>
+    ![](/images/homebrew/gcsaves/data-management.jpg) <br>
 
-    ![save data](/images/homebrew/gcsaves/save-data.jpg)
+    ![](/images/homebrew/gcsaves/save-data.jpg)
 
 1. Find the save you want, select it and select `Move or Copy`.
 

_pages/en_US/hbc-mini.md

@@ -15,13 +15,13 @@ While it is possible to install BootMii on a Wii mini, you will need to solder a
 
 1. You will see a scam warning screen. Wait 30 seconds for the text "Press 1 to continue" to appear, then press 1.
 
-    ![Scam Screen](/images/hackmii/scam.png)
+    ![](/images/hackmii/scam.png)
 
 1. Press `Continue`, then select `Install The Homebrew Channel`.
 
-    ![Homebrew Channel installation](/images/hackmii/hbc_install.png)
+    ![](/images/hackmii/hbc_install.png)
 
-    ![Homebrew Channel installation OK](/images/hackmii/hbc_install_ok.png)
+    ![](/images/hackmii/hbc_install_ok.png)
 
 1. Press `Continue` when finished.
 1. Once done, select `Exit` to exit the HackMii installer.