LXMERT: Learning Cross-Modality Encoder Representations from Transformers

Introduction

PyTorch code for the EMNLP 2019 paper "LXMERT: Learning Cross-Modality Encoder Representations from Transformers". Slides of our EMNLP 2019 talk are avialable here.

IMPORTANT: To analyze the output of pre-trained model (instead of fine-tuning on downstreaming tasks), please load the weight https://nlp.cs.unc.edu/data/github_pretrain/lxmert20/Epoch20_LXRT.pth, which is trained as in section pre-training. The default weight here is trained with a slightly different protocal as this code.

Results (with this Github version)

Split	VQA	GQA	NLVR2
Local Validation	69.90%	59.80%	74.95%
Test-Dev	72.42%	60.00%	74.45% (Test-P)
Test-Standard	72.54%	60.33%	76.18% (Test-U)

All the results in the table are produced exactly with this code base. Since VQA and GQA test servers only allow limited number of 'Test-Standard' submissions, we use our remaining submission entry from the VQA/GQA challenges 2019 to get these results. For NLVR2, we only test once on the unpublished test set (test-U).

We use this code (with model ensemble) to participate in VQA 2019 and GQA 2019 challenge in May 2019. We are the only team ranking top-3 in both challenges.

Pre-trained models

The pre-trained model (870 MB) is available at http://nlp.cs.unc.edu/data/model_LXRT.pth, and can be downloaded with:

mkdir -p snap/pretrained 
wget http://nlp.cs.unc.edu/data/model_LXRT.pth -P snap/pretrained

If download speed is slower than expected, the pre-trained model could also be downloaded from other sources. Please help put the downloaded file at snap/pretrained/model_LXRT.pth.

We also provide data and commands to pre-train the model in pre-training. The default setup needs 4 GPUs and takes around a week to finish. The pre-trained weights with this code base could be downloaded from https://nlp.cs.unc.edu/data/github_pretrain/lxmert/EpochXX_LXRT.pth, XX from 01 to 12. It is pre-trained for 12 epochs (instead of 20 in EMNLP paper) thus the fine-tuned reuslts are about 0.3% lower on each datasets.

Fine-tune on Vision-and-Language Tasks

We fine-tune our LXMERT pre-trained model on each task with following hyper-parameters:

Dataset	Batch Size	Learning Rate	Epochs	Load Answers
VQA	32	5e-5	4	Yes
GQA	32	1e-5	4	Yes
NLVR2	32	5e-5	4	No

Although the fine-tuning processes are almost the same except for different hyper-parameters, we provide descriptions for each dataset to take care of all details.

General

The code requires Python 3 and please install the Python dependencies with the command:

pip install -r requirements.txt

By the way, a Python 3 virtual environment could be set up and run with:

virtualenv name_of_environment -p python3
source name_of_environment/bin/activate

VQA

Fine-tuning

Please make sure the LXMERT pre-trained model is either downloaded or pre-trained.

Download the re-distributed json files for VQA 2.0 dataset. The raw VQA 2.0 dataset could be downloaded from the official website.

mkdir -p data/vqa
wget nlp.cs.unc.edu/data/lxmert_data/vqa/train.json -P data/vqa/
wget nlp.cs.unc.edu/data/lxmert_data/vqa/nominival.json -P  data/vqa/
wget nlp.cs.unc.edu/data/lxmert_data/vqa/minival.json -P data/vqa/

Download faster-rcnn features for MS COCO train2014 (17 GB) and val2014 (8 GB) images (VQA 2.0 is collected on MS COCO dataset). The image features are also available on Google Drive and Baidu Drive (see Alternative Download for details).

mkdir -p data/mscoco_imgfeat
wget nlp.cs.unc.edu/data/lxmert_data/mscoco_imgfeat/train2014_obj36.zip -P data/mscoco_imgfeat
unzip data/mscoco_imgfeat/train2014_obj36.zip -d data/mscoco_imgfeat && rm data/mscoco_imgfeat/train2014_obj36.zip
wget nlp.cs.unc.edu/data/lxmert_data/mscoco_imgfeat/val2014_obj36.zip -P data/mscoco_imgfeat
unzip data/mscoco_imgfeat/val2014_obj36.zip -d data && rm data/mscoco_imgfeat/val2014_obj36.zip

Before fine-tuning on whole VQA 2.0 training set, verifying the script and model on a small training set (512 images) is recommended. The first argument 0 is GPU id. The second argument vqa_lxr955_tiny is the name of this experiment.
```
bash run/vqa_finetune.bash 0 vqa_lxr955_tiny --tiny
```
If no bug came out, then the model is ready to be trained on the whole VQA corpus:
```
bash run/vqa_finetune.bash 0 vqa_lxr955
```

It takes around 8 hours (2 hours per epoch * 4 epochs) to converge. The logs and model snapshots will be saved under folder snap/vqa/vqa_lxr955. The validation result after training will be around 69.7% to 70.2%.

Local Validation

The results on the validation set (our minival set) are printed while training. The validation result is also saved to snap/vqa/[experiment-name]/log.log. If the log file was accidentally deleted, the validation result in training is also reproducible from the model snapshot:

bash run/vqa_test.bash 0 vqa_lxr955_results --test minival --load snap/vqa/vqa_lxr955/BEST

Submitted to VQA test server

Download our re-distributed json file containing VQA 2.0 test data.
```
wget nlp.cs.unc.edu/data/lxmert_data/vqa/test.json -P data/vqa/
```

Download the faster rcnn features for MS COCO test2015 split (16 GB).

wget nlp.cs.unc.edu/data/lxmert_data/mscoco_imgfeat/test2015_obj36.zip -P data/mscoco_imgfeat
unzip data/mscoco_imgfeat/test2015_obj36.zip -d data && rm data/mscoco_imgfeat/test2015_obj36.zip

Since VQA submission system requires submitting whole test data, we need to run inference over all test splits (i.e., test dev, test standard, test challenge, and test held-out). It takes around 10~15 mins to run test inference (448K instances to run).
```
bash run/vqa_test.bash 0 vqa_lxr955_results --test test --load snap/vqa/vqa_lxr955/BEST
```

The test results will be saved in snap/vqa_lxr955_results/test_predict.json. The VQA 2.0 challenge for this year is host on EvalAI at https://evalai.cloudcv.org/web/challenges/challenge-page/163/overview It still allows submission after the challenge ended. Please check the official website of VQA Challenge for detailed information and follow the instructions in EvalAI to submit. In general, after registration, the only thing remaining is to upload the test_predict.json file and wait for the result back.

The testing accuracy with exact this code is 72.42% for test-dev and 72.54% for test-standard. The results with the code base are also publicly shown on the VQA 2.0 leaderboard with entry LXMERT github version.

GQA

Fine-tuning

Please make sure the LXMERT pre-trained model is either downloaded or pre-trained.
Download the re-distributed json files for GQA balanced version dataset. The original GQA dataset is available in the Download section of its website and the script to preprocess these datasets is under data/gqa/process_raw_data_scripts.
```
mkdir -p data/gqa
wget nlp.cs.unc.edu/data/lxmert_data/gqa/train.json -P data/gqa/
wget nlp.cs.unc.edu/data/lxmert_data/gqa/valid.json -P data/gqa/
wget nlp.cs.unc.edu/data/lxmert_data/gqa/testdev.json -P data/gqa/
```

Download Faster R-CNN features for Visual Genome and GQA testing images (30 GB). GQA's training and validation data are collected from Visual Genome. Its testing images come from MS COCO test set (I have verified this with one of GQA authors Drew A. Hudson). The image features are also available on Google Drive and Baidu Drive (see Alternative Download for details).

mkdir -p data/vg_gqa_imgfeat
wget nlp.cs.unc.edu/data/lxmert_data/vg_gqa_imgfeat/vg_gqa_obj36.zip -P data/vg_gqa_imgfeat
unzip data/vg_gqa_imgfeat/vg_gqa_obj36.zip -d data && rm data/vg_gqa_imgfeat/vg_gqa_obj36.zip
wget nlp.cs.unc.edu/data/lxmert_data/vg_gqa_imgfeat/gqa_testdev_obj36.zip -P data/vg_gqa_imgfeat
unzip data/vg_gqa_imgfeat/gqa_testdev_obj36.zip -d data && rm data/vg_gqa_imgfeat/gqa_testdev_obj36.zip

Before fine-tuning on whole GQA training+validation set, verifying the script and model on a small training set (512 images) is recommended. The first argument 0 is GPU id. The second argument gqa_lxr955_tiny is the name of this experiment.
```
bash run/gqa_finetune.bash 0 gqa_lxr955_tiny --tiny
```
If no bug came out, then the model is ready to be trained on the whole GQA corpus (train + validation), and validate on the testdev set:
```
bash run/gqa_finetune.bash 0 gqa_lxr955
```

It takes around 16 hours (4 hours per epoch * 4 epochs) to converge. The logs and model snapshots will be saved under folder snap/gqa/gqa_lxr955. The validation result after training will be around 59.8% to 60.1%.

Local Validation

The results on testdev is printed out while training and saved in snap/gqa/gqa_lxr955/log.log. It could be also re-calculated with command:

bash run/gqa_test.bash 0 gqa_lxr955_results --load snap/gqa/gqa_lxr955/BEST --test testdev --batchSize 1024

Note: Our local testdev result is usually 0.1% to 0.5% lower than the submitted testdev result. The reason is that the test server takes an advanced evaluation system while our local evaluator only calculates the exact matching. Please use this official evaluator (784 MB) if you want to have the exact number without submitting.

Submitted to GQA test server

Download our re-distributed json file containing GQA test data.

wget nlp.cs.unc.edu/data/lxmert_data/gqa/submit.json -P data/gqa/

Since GQA submission system requires submitting the whole test data, we need to run inference over all test splits. It takes around 30~60 mins to run test inference (4.2M instances to run).
```
bash run/gqa_test.bash 0 gqa_lxr955_results --load snap/gqa/gqa_lxr955/BEST --test submit --batchSize 1024
```
After running test script, a json file submit_predict.json under snap/gqa/gqa_lxr955_results will contain all the prediction results and is ready to be submitted. The GQA challenge 2019 is hosted by EvalAI at https://evalai.cloudcv.org/web/challenges/challenge-page/225/overview. After registering the account, uploading the submit_predict.json and waiting for the results are the only thing remained. Please also check GQA official website in case the test server is changed.

The testing accuracy with exactly this code is 60.00% for test-dev and 60.33% for test-standard. The results with the code base are also publicly shown on the GQA leaderboard with entry LXMERT github version.

NLVR2

Fine-tuning

Download the NLVR2 data from the official GitHub repo.
```
git submodule update --init
```

Process the NLVR2 data to json files.

bash -c "cd data/nlvr2/process_raw_data_scripts && python process_dataset.py"

Download the NLVR2 image features for train (21 GB) & valid (1.6 GB) splits. The image features are also available on Google Drive and Baidu Drive (see Alternative Download for details). To access to the original images, please follow the instructions on NLVR2 official Github. The images could either be downloaded with the urls or by signing an agreement form for data usage. And the feature could be extracted as described in feature extraction
```
mkdir -p data/nlvr2_imgfeat
wget nlp.cs.unc.edu/data/lxmert_data/nlvr2_imgfeat/train_obj36.zip -P data/nlvr2_imgfeat
unzip data/nlvr2_imgfeat/train_obj36.zip -d data && rm data/nlvr2_imgfeat/train_obj36.zip
wget nlp.cs.unc.edu/data/lxmert_data/nlvr2_imgfeat/valid_obj36.zip -P data/nlvr2_imgfeat
unzip data/nlvr2_imgfeat/valid_obj36.zip -d data && rm data/nlvr2_imgfeat/valid_obj36.zip
```
Before fine-tuning on whole NLVR2 training set, verifying the script and model on a small training set (512 images) is recommended. The first argument 0 is GPU id. The second argument nlvr2_lxr955_tiny is the name of this experiment. Do not worry if the result is low (50~55) on this tiny split, the whole training data would bring the performance back.
```
bash run/nlvr2_finetune.bash 0 nlvr2_lxr955_tiny --tiny
```
If no bugs are popping up from the previous step, it means that the code, the data, and image features are ready. Please use this command to train on the full training set. The result on NLVR2 validation (dev) set would be around 74.0 to 74.5.
```
bash run/nlvr2_finetune.bash 0 nlvr2_lxr955
```

Inference on Public Test Split

Download NLVR2 image features for the public test split (1.6 GB).

wget nlp.cs.unc.edu/data/lxmert_data/nlvr2_imgfeat/test_obj36.zip -P data/nlvr2_imgfeat
unzip data/nlvr2_imgfeat/test_obj36.zip -d data/nlvr2_imgfeat && rm data/nlvr2_imgfeat/test_obj36.zip

Test on the public test set (corresponding to 'test-P' on NLVR2 leaderboard) with:

bash run/nlvr2_test.bash 0 nlvr2_lxr955_results --load snap/nlvr2/nlvr2_lxr955/BEST --test test --batchSize 1024

The test accuracy would be shown on the screen after around 5~10 minutes. It also saves the predictions in the file test_predict.csv under snap/nlvr2_lxr955_reuslts, which is compatible to NLVR2 official evaluation script. The official eval script also calculates consistency ('Cons') besides the accuracy. We could use this official script to verify the results by running:
```
python data/nlvr2/nlvr/nlvr2/eval/metrics.py snap/nlvr2/nlvr2_lxr955_results/test_predict.csv data/nlvr2/nlvr/nlvr2/data/test1.json
```

The accuracy of public test ('test-P') set should be almost same to the validation set ('dev'), which is around 74.0% to 74.5%.

Unreleased Test Sets

To be tested on the unreleased held-out test set (test-U on the leaderboard ), the code needs to be sent. Please check the NLVR2 official github and NLVR project website for details.

General Debugging Options

Since it takes a few minutes to load the features, the code has an option to prototype with a small amount of training data.

# Training with 512 images:
bash run/vqa_finetune.bash 0 --tiny 
# Training with 4096 images:
bash run/vqa_finetune.bash 0 --fast

Pre-training

Download our aggregated LXMERT dataset from MS COCO, Visual Genome, VQA, and GQA (around 700MB in total). The joint answer labels are saved in data/lxmert/all_ans.json.

mkdir -p data/lxmert
wget nlp.cs.unc.edu/data/lxmert_data/lxmert/mscoco_train.json -P data/lxmert/
wget nlp.cs.unc.edu/data/lxmert_data/lxmert/mscoco_nominival.json -P data/lxmert/
wget nlp.cs.unc.edu/data/lxmert_data/lxmert/vgnococo.json -P data/lxmert/
wget nlp.cs.unc.edu/data/lxmert_data/lxmert/mscoco_minival.json -P data/lxmert/

[Skip this if you have run VQA fine-tuning.] Download the detection features for MS COCO images.

mkdir -p data/mscoco_imgfeat
wget nlp.cs.unc.edu/data/lxmert_data/mscoco_imgfeat/train2014_obj36.zip -P data/mscoco_imgfeat
unzip data/mscoco_imgfeat/train2014_obj36.zip -d data/mscoco_imgfeat && rm data/mscoco_imgfeat/train2014_obj36.zip
wget nlp.cs.unc.edu/data/lxmert_data/mscoco_imgfeat/val2014_obj36.zip -P data/mscoco_imgfeat
unzip data/mscoco_imgfeat/val2014_obj36.zip -d data && rm data/mscoco_imgfeat/val2014_obj36.zip

[Skip this if you have run GQA fine-tuning.] Download the detection features for Visual Genome images.

mkdir -p data/vg_gqa_imgfeat
wget nlp.cs.unc.edu/data/lxmert_data/vg_gqa_imgfeat/vg_gqa_obj36.zip -P data/vg_gqa_imgfeat
unzip data/vg_gqa_imgfeat/vg_gqa_obj36.zip -d data && rm data/vg_gqa_imgfeat/vg_gqa_obj36.zip

Test on a small split of the MS COCO + Visual Genome datasets:
```
bash run/lxmert_pretrain.bash 0,1,2,3 --multiGPU --tiny
```
Run on the whole MS COCO and Visual Genome related datasets (i.e., VQA, GQA, COCO caption, VG Caption, VG QA). Here, we take a simple single-stage pre-training strategy (20 epochs with all pre-training tasks) rather than the two-stage strategy in our paper (10 epochs without image QA and 10 epochs with image QA). The pre-training finishes in 8.5 days on 4 GPUs. By the way, I hope that my experience in this project would help anyone with limited computational resources.
```
bash run/lxmert_pretrain.bash 0,1,2,3 --multiGPU
```
Multiple GPUs: Argument 0,1,2,3 indicates taking 4 GPUs to pre-train LXMERT. If the server does not have 4 GPUs (I am sorry to hear that), please consider halving the batch-size or using the NVIDIA/apex library to support half-precision computation. The code uses the default data parallelism in PyTorch and thus extensible to less/more GPUs. The python main thread would take charge of the data loading. On 4 GPUs, we do not find that the data loading becomes a bottleneck (around 5% overhead).

GPU Types: We find that either Titan XP, GTX 2080, and Titan V could support this pre-training. However, GTX 1080, with its 11G memory, is a little bit small thus please change the batch_size to 224 (instead of 256).
I have verified these pre-training commands with 12 epochs. The pre-trained weights from previous process could be downloaded from https://nlp.cs.unc.edu/data/github_pretrain/lxmert/EpochXX_LXRT.pth, XX from 01 to 12. The results are roughly the same (around 0.3% lower in downstream tasks because of fewer epochs).

Explanation of arguments in the pre-training script run/lxmert_pretrain.bash:

python src/pretrain/lxmert_pretrain_new.py \
    # The pre-training tasks
    --taskMaskLM --taskObjPredict --taskMatched --taskQA \  
    
    # Vision subtasks
    # obj / attr: detected object/attribute label prediction.
    # feat: RoI feature regression.
    --visualLosses obj,attr,feat \
    
    # Mask rate for words and objects
    --wordMaskRate 0.15 --objMaskRate 0.15 \
    
    # Training and validation sets
    # mscoco_nominival + mscoco_minival = mscoco_val2014
    # visual genome - mscoco = vgnococo
    --train mscoco_train,mscoco_nominival,vgnococo --valid mscoco_minival \
    
    # Number of layers in each encoder
    --llayers 9 --xlayers 5 --rlayers 5 \
    
    # Train from scratch (Using intialized weights) instead of loading BERT weights.
    --fromScratch \

    # Hyper parameters
    --batchSize 256 --optim bert --lr 1e-4 --epochs 20 \
    --tqdm --output $output ${@:2}

Alternative Dataset and Features Download Links

All default download links are provided by our servers in UNC CS department and under our NLP group website but the network bandwidth might be limited. We thus provide a few other options with Google Drive and Baidu Drive.

The files in online drives are almost structured in the same way as our repo but have a few differences due to specific policies. After downloading the data and features from the drives, please re-organize them under data/ folder according to the following example:

REPO ROOT
 |
 |-- data                  
 |    |-- vqa
 |    |    |-- train.json
 |    |    |-- minival.json
 |    |    |-- nominival.json
 |    |    |-- test.json
 |    |
 |    |-- mscoco_imgfeat
 |    |    |-- train2014_obj36.tsv
 |    |    |-- val2014_obj36.tsv
 |    |    |-- test2015_obj36.tsv
 |    |
 |    |-- vg_gqa_imgfeat -- *.tsv
 |    |-- gqa -- *.json
 |    |-- nlvr2_imgfeat -- *.tsv
 |    |-- nlvr2 -- *.json
 |    |-- lxmert -- *.json          # Pre-training data
 | 
 |-- snap
 |-- src

Please also kindly contact us if anything is missing!

Google Drive

As an alternative way to download feature from our UNC server, you could also download the feature from google drive with link https://drive.google.com/drive/folders/1Gq1uLUk6NdD0CcJOptXjxE6ssY5XAuat?usp=sharing. The structure of the folders on drive is:

Google Drive Root
 |-- data                  # The raw data and image features without compression
 |    |-- vqa
 |    |-- gqa
 |    |-- mscoco_imgfeat
 |    |-- ......
 |
 |-- image_feature_zips    # The image-feature zip files (Around 45% compressed)
 |    |-- mscoco_imgfeat.zip
 |    |-- nlvr2_imgfeat.zip
 |    |-- vg_gqa_imgfeat.zip
 |
 |-- snap -- pretrained -- model_LXRT.pth # The pytorch pre-trained model weights.

Note: image features in zip files (e.g., mscoco_mgfeat.zip) are the same to which in data/ (i.e., data/mscoco_imgfeat). If you want to save network bandwidth, please download the feature zips and skip downloading the *_imgfeat folders under data/.

Baidu Drive

Since Google Drive is not officially available across the world, we also create a mirror on Baidu drive (i.e., Baidu PAN). The dataset and features could be downloaded with shared link https://pan.baidu.com/s/1m0mUVsq30rO6F1slxPZNHA and access code wwma.

Baidu Drive Root
 |
 |-- vqa
 |    |-- train.json
 |    |-- minival.json
 |    |-- nominival.json
 |    |-- test.json
 |
 |-- mscoco_imgfeat
 |    |-- train2014_obj36.zip
 |    |-- val2014_obj36.zip
 |    |-- test2015_obj36.zip
 |
 |-- vg_gqa_imgfeat -- *.zip.*  # Please read README.txt under this folder
 |-- gqa -- *.json
 |-- nlvr2_imgfeat -- *.zip.*   # Please read README.txt under this folder
 |-- nlvr2 -- *.json
 |-- lxmert -- *.json
 | 
 |-- pretrained -- model_LXRT.pth

Since Baidu Drive does not support extremely large files, we split a few features zips into multiple small files. Please follow the README.txt under baidu_drive/vg_gqa_imgfeat and baidu_drive/nlvr2_imgfeat to concatenate back to the feature zips with command cat.

Code and Project Explanation

All code is in folder src. The basics in lxrt. The python files related to pre-training and fine-tuning are saved in src/pretrain and src/tasks respectively.
I kept folders containing image features (e.g., mscoco_imgfeat) separated from vision-and-language dataset (e.g., vqa, lxmert) because multiple vision-and-language datasets would share common images.
We use the name lxmert for our framework and use the name lxrt (Language, Cross-Modality, and object-Relationship Transformers) to refer to our our models.
To be consistent with the name lxrt (Language, Cross-Modality, and object-Relationship Transformers), we use lxrXXX to denote the number of layers. E.g., lxr955 (used in current pre-trained model) indicates a model with 9 Language layers, 5 cross-modality layers, and 5 object-Relationship layers. If we consider a single-modality layer as a half of cross-modality layer, the total number of layers is (9 + 5) / 2 + 5 = 12, which is the same as BERT_BASE.
We share the weight between the two cross-modality attention sub-layers. Please check the visual_attention variable, which is used to compute both lang->visn attention and visn->lang attention. (I am sorry that the name visual_attention is misleading because I deleted the lang_attention there.) Sharing weights is mostly used for saving computational resources and it also (intuitively) helps forcing the features from visn/lang into a joint subspace.
The box coordinates are not normalized from [0, 1] to [-1, 1], which looks like a typo but actually not ;). Normalizing the coordinate would not affect the output of box encoder (mathematically and almost numerically). ~~(Hint: consider the LayerNorm in positional encoding)~~

Faster R-CNN Feature Extraction

We use the Faster R-CNN feature extractor demonstrated in "Bottom-Up and Top-Down Attention for Image Captioning and Visual Question Answering", CVPR 2018 and its released code at Bottom-Up-Attention github repo. It was trained on Visual Genome dataset and implemented based on a specific Caffe version.

To extract features with this Caffe Faster R-CNN, we publicly release a docker image airsplay/bottom-up-attention on docker hub that takes care of all the dependencies and library installation . Instructions and examples are demonstrated below. You could also follow the installation instructions in the bottom-up attention github to setup the tool: https://github.com/peteanderson80/bottom-up-attention.

The BUTD feature extractor is widely used in many other projects. If you want to reproduce the results from their paper, feel free to use our docker as a tool.

Feature Extraction with Docker

Docker is a easy-to-use virtualization tool which allows you to plug and play without installing libraries.

The built docker file for bottom-up-attention is released on docker hub and could be downloaded with command:

sudo docker pull airsplay/bottom-up-attention

The Dockerfile could be downloaed here, which allows using other CUDA versions.

After pulling the docker, you could test running the docker container with command:

docker run --gpus all --rm -it airsplay/bottom-up-attention bash

If errors about --gpus all popped up, please read the next section.

Docker GPU Access

Note that the purpose of the argument --gpus all is to expose GPU devices to the docker container, and it requires Docker >= 19.03 along with nvidia-container-toolkit:

For running Docker with an older version, either update it to 19.03 or use the flag --runtime=nvidia instead of --gpus all.

An Example: Feature Extraction for NLVR2

We demonstrate how to extract Faster R-CNN features of NLVR2 images.

Please first follow the instructions on the NLVR2 official repo to get the images.
Download the pre-trained Faster R-CNN model. Instead of using the default pre-trained model (trained with 10 to 100 boxes), we use the 'alternative pretrained model' which was trained with 36 boxes.
```
wget 'https://www.dropbox.com/s/nu6jwhc88ujbw1v/resnet101_faster_rcnn_final_iter_320000.caffemodel?dl=1' -O data/nlvr2_imgfeat/resnet101_faster_rcnn_final_iter_320000.caffemodel
```
Run docker container with command:
```
docker run --gpus all -v /path/to/nlvr2/images:/workspace/images:ro -v /path/to/lxrt_public/data/nlvr2_imgfeat:/workspace/features --rm -it airsplay/bottom-up-attention bash
```
-v mounts the folders on host os to the docker image container.

Note0: If it says something about 'privilege', add sudo before the command.

Note1: If it says something about '--gpus all', it means that the GPU options are not correctly set. Please read Docker GPU Access for the instructions to allow GPU access.

Note2: /path/to/nlvr2/images would contain subfolders train, dev, test1 and test2.

Note3: Both paths '/path/to/nlvr2/images/' and '/path/to/lxrt_public' requires absolute paths.

Extract the features inside the docker container. The extraction script is copied from butd/tools/generate_tsv.py and modified by Jie Lei and me.

cd /workspace/features
CUDA_VISIBLE_DEVICES=0 python extract_nlvr2_image.py --split train 
CUDA_VISIBLE_DEVICES=0 python extract_nlvr2_image.py --split valid
CUDA_VISIBLE_DEVICES=0 python extract_nlvr2_image.py --split test

It would takes around 5 to 6 hours for the training split and 1 to 2 hours for the valid and test splits. Since it is slow, I recommend to run them parallelly if there are multiple GPUs. It could be achieved by changing the gpu_id in CUDA_VISIBLE_DEVICES=$gpu_id.

The features will be saved in train.tsv, valid.tsv, and test.tsv under the directory data/nlvr2_imgfeat, outside the docker container. I have verified the extracted image features are the same to the ones I provided in NLVR2 fine-tuning.

Yet Another Example: Feature Extraction for MS COCO Images

Download the MS COCO train2014, val2014, and test2015 images from MS COCO official website.

Download the pre-trained Faster R-CNN model.

mkdir -p data/mscoco_imgfeat
wget 'https://www.dropbox.com/s/nu6jwhc88ujbw1v/resnet101_faster_rcnn_final_iter_320000.caffemodel?dl=1' -O data/mscoco_imgfeat/resnet101_faster_rcnn_final_iter_320000.caffemodel

Run the docker container with the command:
```
docker run --gpus all -v /path/to/mscoco/images:/workspace/images:ro -v $(pwd)/data/mscoco_imgfeat:/workspace/features --rm -it airsplay/bottom-up-attention bash
```
Note: Option -v mounts the folders outside container to the paths inside the container.

Note1: Please use the absolute path to the MS COCO images folder images. The images folder containing the train2014, val2014, and test2015 sub-folders. (It's the standard way to save MS COCO images.)

Extract the features inside the docker container.

cd /workspace/features
CUDA_VISIBLE_DEVICES=0 python extract_coco_image.py --split train 
CUDA_VISIBLE_DEVICES=0 python extract_coco_image.py --split valid
CUDA_VISIBLE_DEVICES=0 python extract_coco_image.py --split test

Exit from the docker container (by executing exit command in bash). The extracted features would be saved under folder data/mscoco_imgfeat.

Reference

If you find this project helps, please cite our paper :)

@inproceedings{tan2019lxmert,
  title={LXMERT: Learning Cross-Modality Encoder Representations from Transformers},
  author={Tan, Hao and Bansal, Mohit},
  booktitle={Proceedings of the 2019 Conference on Empirical Methods in Natural Language Processing},
  year={2019}
}

Acknowledgement

We thank the funding support from ARO-YIP Award #W911NF-18-1-0336, & awards from Google, Facebook, Salesforce, and Adobe.

We thank Peter Anderson for providing the faster R-CNN code and pre-trained models under Bottom-Up-Attention Github Repo. We thank Hengyuan Hu for his PyTorch VQA implementation, our VQA implementation borrows its pre-processed answers. We thank hugginface for releasing the excellent PyTorch code PyTorch Transformers.

We thank Drew A. Hudson to answer all our questions about GQA specification. We thank Alane Suhr for helping test LXMERT on NLVR2 unreleased test split and provide a detailed analysis.

We thank all the authors and annotators of vision-and-language datasets (i.e., MS COCO, Visual Genome, VQA, GQA, NLVR2 ), which allows us to develop a pre-trained model for vision-and-language tasks.

We thank Jie Lei and Licheng Yu for their helpful discussions. I also want to thank Shaoqing Ren to teach me vision knowledge when I was in MSRA. We also thank you to help look into our code. Please kindly contact us if you find any issue. Comments are always welcome.

LXRThanks.

Name		Name	Last commit message	Last commit date
Latest commit History 56 Commits
data		data
run		run
snap/pretrained		snap/pretrained
src		src
.gitignore		.gitignore
.gitmodules		.gitmodules
LICENSE		LICENSE
README.md		README.md
experience_in_pretraining.md		experience_in_pretraining.md
requirements.txt		requirements.txt

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

LXMERT: Learning Cross-Modality Encoder Representations from Transformers

Introduction

Results (with this Github version)

Pre-trained models

Fine-tune on Vision-and-Language Tasks

General

VQA

Fine-tuning

Local Validation

Submitted to VQA test server

GQA

Fine-tuning

Local Validation

Submitted to GQA test server

NLVR2

Fine-tuning

Inference on Public Test Split

Unreleased Test Sets

General Debugging Options

Pre-training

Alternative Dataset and Features Download Links

Google Drive

Baidu Drive

Code and Project Explanation

Faster R-CNN Feature Extraction

Feature Extraction with Docker

Docker GPU Access

An Example: Feature Extraction for NLVR2

Yet Another Example: Feature Extraction for MS COCO Images

Reference

Acknowledgement

About

Releases

Packages

Languages

License

hfaghihi15/lxmert

Folders and files

Latest commit

History

Repository files navigation

LXMERT: Learning Cross-Modality Encoder Representations from Transformers

Introduction

Results (with this Github version)

Pre-trained models

Fine-tune on Vision-and-Language Tasks

General

VQA

Fine-tuning

Local Validation

Submitted to VQA test server

GQA

Fine-tuning

Local Validation

Submitted to GQA test server

NLVR2

Fine-tuning

Inference on Public Test Split

Unreleased Test Sets

General Debugging Options

Pre-training

Alternative Dataset and Features Download Links

Google Drive

Baidu Drive

Code and Project Explanation

Faster R-CNN Feature Extraction

Feature Extraction with Docker

Docker GPU Access

An Example: Feature Extraction for NLVR2

Yet Another Example: Feature Extraction for MS COCO Images

Reference

Acknowledgement

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages