v1.10.4

November 19th, 2024

This release introduces compatibility with the new Consumer ID for Permissionless ICS, improves detection of Tendermint/CometBFT versions for non-standard chains, and enhances IPv6 support for gRPC connections. Log messages have been refined for better clarity, including adjusting redundant packet broadcasts to INFO.

BUG FIXES

• Relayer Library
  • Fix error messages in logs to accurately display the RPC endpoint
    that failed.
    (#4250)
  • Fix an issue where Hermes would fail to connect to gRPC servers
    with an IPv6 address.
    (#4237)
  • Fix the extraction of the chain name from the chain ID to ensure
    accurate identification.
    (#4247)

FEATURES

• Integration Test Framework
  • Disable TLS configuration when using IPv6 for the gRPC endpoint.
    (#4224)

IMPROVEMENTS

• General
  • Improve detection of Tendermint/CometBFT compatibility
    mode when a chain runs a non-standard version
    (#4178)
• Relayer Library
  • Use CCV consumer ID to submit misbehaviour messages
    (#4153)
  • Improve log message when broadcasting redundant packet and set it
    to INFO instead of ERROR.
    (#4252)
• Integration Test Framework
  • Update the versions of the following simd running the integration tests in the CI:

  • From v6.3.0 to v6.3.1

  • From v7.4.0 to v7.8.0

  • From v8.3.1 to v8.5.1

  • From v9.0.0-beta.1 to v9.0.0-rc.0

    (#4202)

  • Update the version of Gaia running the integration tests in the CI from v18.1.0
    to v20.0.0 (#4204)

v1.10.3

September 2nd, 2024

This release fixes an issue where Hermes could not connect to gRPC servers over TLS. Additionally, this release also fixes a bug in the clear packet CLI where the excluded_sequences configuration option was not always taken into account.

Furthermore, Hermes now uses abci_query instead of gRPC for some queries, for instance for querying staking parameters and service configuration during health checks, and when retrieving version information.

v1.10.2

August 14th, 2024

This release brings significant performance improvements and introduces a new configuration options for better control over packet clearing. Enhancements include faster startup times through optimized queries and the introduction of a clear_limit setting for packet clearing. Additionally, bug fixes and updates to the integration test framework ensure greater stability and compatibility across various environments.

BUG FIXES

• Relayer Library
  • Fix the memo_overwrite configuration to correctly apply the
    overwrite if it is configured.
    (#4104)
• Telemetry & Metrics
  • Fix the dynamic_gas_queried_success_fees Prometheus metric name.
    (#4104)

IMPROVEMENTS

• Relayer Library
  • Add a new configuration clear_limit to specify the maximum number
    of packets cleared every time packet clearing is triggered.
    Defaults to 50.
    (#4071)
  • Paginate results of query_packet_commitments and query_packet_acknowledgements
    queries to speed up the scanning phase.
    (#4101)
  • Use the ibc.core.connection.v1.ConnectionParams gRPC query to retrieve maxExpectedTimePerBlock
    and check it against the configured max_block_time instead of using the /genesis endpoint.
    This improves both startup times and reliability for most chains.
    (#4143)
• Integration Test Framework
  • Update the version of Gaia running the integration tests in the CI from v17.2.1
    to v18.1.0 (#4114)
  • Update the version of Provenance running the integration tests in the CI from v1.17.0
    to v1.19.1 (#4115)
  • Update the version of Osmosis running the integration tests in the CI from v25.0.0
    to v25.2.0 (#4116)
  • Update the version of Juno running the integration tests in the CI from v22.0.0
    to v23.0.0 (#4117)
  • Update the version of Migaloo Chain running the integration tests in the CI from v4.1.3
    to v4.2.0 (#4118)
  • Update the version of wasmd running the integration tests in the CI from v0.51.0
    to v0.52.0 (#4120)
  • Update the version of Stride running the integration tests in the CI from v21.0.0
    to v23.0.1 (#4121)
  • Update the version of Neutron running the integration tests in the CI from v3.0.5
    to v4.1.0 (#4122)

v1.10.1

July 23th, 2024

In this release tendermint-rs has been updated to the latest version, addressing issues with the /block_results response. This ensures compatibility with CometBFT v0.38.10.

And enhancements have been made to the logs regarding packet clearing, providing better insights and warnings for users.

BREAKING CHANGES

• Bump version of ibc-proto from v0.46.0 to v0.47.0 and
  version of tendermint-rs from v0.37.0 to v0.38.1.
  (#4093)

IMPROVEMENTS

• Integration Test Framework
  • Add the features packet-forward and ica to enable
    Packet Forward Middleware and ICA when running tests with Osmosis
    (#3195)
• Relayer Library
  • Improve logs when clearing packet.
  • When Hermes doesn't pull packet data it will now warn the user
    instead of logging pulled packet data for 0 events out of X
  • When ICS20 packets are filtered due to having a receiver or memo
    field too big, the log will be at warn level instead of debug.
    (#4072)

v1.10.0

June 24th, 2024

This release enhances filter configurations and includes the following updates:

1. excluded_sequences supports sequence ranges in addition to exact values, e.g. [1, 2, "5-10", 13] is now valid and would exclude packet with sequences 1, 2, 5, 6, 7, 8, 9, 10, 13.
2. packet_filter now ignores unintended whitespace.
3. A new allow_ccq per-chain configuration has been added to skip the relaying of ICS31 Cross Chain Queries.

Additionally, various improvements to testing and bug fixes have been implemented.

• General

  • Fix a bug where in some cases, Hermes would drop all events in a
    batch that came after an event rejected by the filtering policy
    (#4034)

• Relayer Library

  • Discard CrossChain queries intended for unconfigured chains.
    (#4021)

• Integration Test Framework

  • Add tests to ensure that Hermes correctly relays transfer messages
    from a grantee address with granted authorisation using authz module.
    (#4046)

• Relayer Library

  • Add a new per-chain configuration allow_ccq to enable or disable
    relaying of ICS31 Cross Chain Query packets.
    (#4040)

• Integration Test Framework

  • Update the version of Gaia running the integration tests in the CI from v15.2.0
    to v17.2.0 (#4023)
  • Update the version of Osmosis running the integration tests in the CI from v24.0.1
    to v25.0.0 (#4024)
  • Update the version of Juno running the integration tests in the CI from v21.0.0
    to v22.0.0 (#4025)
  • Update the version of Neutron running the integration tests in the CI from v3.0.2
    to v3.0.5 (#4026)
  • Update the version of Celestia app running the integration tests in the CI from v1.4.0
    to v1.11.0 (#4027)
  • Update the version of wasmd running the integration tests in the CI from v0.50.0
    to v0.51.0 (#4029)
  • Reduce run time for ICS29 tests by immediately verifying if either
    the legacy fees, recv_fee + ack_fee + timeout_fee or current
    fees, max(recv_fee + ack_fee, timeout_fee) have been escrowed.
    (#4053)
  • Refactored the test-framework bootstrapping for n-ary chain tests
    to utilize the specified topology.
  • Currently, only linear, cyclic and fully connected topologies are supported.
    (#4038)

• Relayer Library

  • Use custom User-Agent for Hermes queries
    (#3979)
  • Updated the channel and port filter parsing to ignore whitespaces.
    This will prevent unintended channel scanning due to accidental
    whitespaces when exact matches are specified in the packet_filter
    configuration.
    (#4045)
  • Improve the excluded_sequences configuration so that it now accepts
    ranges of sequence values in addition to exact values.
    Accepted format:

  • Exact sequence, e.g. [1, 2, 3]

  • "-" separator, e.g. ["1-3"]

    These can be combined making the following configurations equivalent:

  • excluded_sequences = { 'channel-0' = [1, "3-5", 7, "9-12"] }

  • excluded_sequences = { 'channel-0' = [1, 3, 4, 5, 7, 9, 10, 11, 12] }

    (#4047)

v1.9.0

May 30th, 2024

This v1.9.0 release introduces new features and improvements to Hermes.

Major Features:

1. Channel Upgrades: Hermes now handles channel upgrade events introduced in ibc-go v8, helping chains opting-in to new functionality on existing channels.
2. Dynamic Gas Fees Compatibility: Hermes is now compatible with Skip's x/feemarket module for dynamic gas fees, in addition to Osmosis' implementation, providing more flexibility in gas fee management.

Additionally, this release includes various bug fixes enhancing the stability and performance of Hermes. These fixes address issues with channel and connection creation on older ibc-go versions, event extraction, health-check messages, and more.

BREAKING CHANGES

• Telemetry & Metrics
  • Remove the telemetry and rest-server feature flags, ensuring Hermes is always built with telemetry and REST support. (#3878)
    Both servers can still be disabled in the configuration file, by setting telemetry.enabled = false and rest.enabled = false, respectively.

FEATURES

• Relayer Library
  • Add support for upgrading channels, as per the ICS 004 specification (#3228)
    This feature allows chains to upgrade an existing channel to take advantage of new features without having to create a new channel, thus preserving all existing packet state processed on the channel. For example, a channel could now be upgraded to enable the ICS 029 fee middleware, allowing relayer operators on that channel to receive fees each time they relay an incentivized packet.
  • Improve reliability of event source in pull mode by proceeding to next block even if Hermes cannot parse the current block (#3894)
    Add new configuration option to event_source setting: max_retries defines how many times Hermes should attempt to pull a block over RPC.

    event_source = { mode = 'pull', interval = '1s', max_retries = 4 }

IMPROVEMENTS

• Integration Test Framework
  • Update the version of Juno running the integration tests in the CI from v17.1.1 to v21.0.0 (#3959)
  • Update the version of Migaloo Chain running the integration tests in the CI from v3.0.2 to v4.1.3 (#3960)
  • Update the version of wasmd running the integration tests in the CI from v0.30.0 to v0.50.0 (#3961)
  • Update the version of ibc-go simapp running the integration tests in the CI from v8.2.0 to v8.3.1 (#4009)
• Relayer Library
  • Update to tendermint-rs v0.36.0 (#3966)
  • Use packet_ack_hex event attribute instead of deprecated packet_ack attribute to decode WriteAck event (#3921)
  • Add support for dynamic gas fee for chains using Skip's x/feemarket module, while keeping compatibility with Osmosis' bespoke implementation (#4000)
• Relayer CLI
  • Use RPC (pull) event source instead of WebSocket (push) when generating configuration with hermes config auto (#3913)

BUG FIXES

• Relayer Library
  • Fix creation of channels and connection on chains using an unsupported version of ibc-go, eg. Sei (#3817)
  • Fix a bug where Hermes would only ever extract the first emitted ICS 031 CrossChain Query event, which would cause it to miss the other CCQ events. (#3954)
• Relayer CLI
  • Fixed minimum-gas-prices health-check messages and make it more verbose and legible (#3893)
  • Set compat_mode for pull mode in hermes listen command (#3910)
  • Fixed the trusted height consensus state query when submitting the double vote evidence (#3999)

v1.8.3

May 28th, 2024

This patch release fixes a bug that may happen prevent the relayer from submitting the evidence for a duplicate vote in some cases.

Bug Fixes

• Relayer CLI
  • Fix the trusted height consensus state query when submitting the double vote evidence (#3999)

v1.8.2

March 12th, 2024

This release fixes the two following bugs and improves the connection and channel handshake retry mechanism:

• Fix erroneous warnings for incompatible version of IBC-Go during health checks, ensuring accurate compatibility reporting
• Fix a bug in the clear packets command which caused packet clearing to fail with an "counterparty channel not found" error

BUG FIXES

• Correctly use the counterparty channel and port IDs when clearing the packets from the destination chain to the source chain in the packet clear command (#3889)
• Fix parsing of IBC-Go version in health check and improve health check reporting (#3880)

FEATURES

• Add Injective chain to the chains running the integration tests in the CI (#3887)

IMPROVEMENTS

• Change connection and channel handshake retry strategy to retry at most 10 times (5 times per block max) (#3864)

v1.8.1

March 7th, 2024

This v1.8.1 release brings better reliability when relaying, more enhanced configuration and improved monitoring.

Reliability has been improved:

• It is now possible to relay ICS-04 packets with non-UTF-8 payloads
• Packet sequences are now verified for ordered channels before trying to relay

Additional per-chain configurations have been added:

• excluded_sequences used to skip problematic packets when clearing
• memo_overwrite allowing users to overwrite the relayer memo when chains have a strict limit for the size of the memo.

Monitoring issues improvements:

• A new metric simulate_errors which counts the number of failed simulated transactions
• Out of gas error diagnostic gives more information and a dedicated entry to the guide has been added
• Failed gas simulation will not be considered as unrecoverable for legacy chains.
• The compatibility check during the health-check has been improved will assess more correctly the versions for Ibc-Go and Cosmos SDK

Special thanks to our contributors for their valuable additions to this release:

• Sergey (@freak12techno) for adding the simulate_errors metric (#3845)
• Martin Dyring-Andersen (@mdyring) for adding recovery from failed gas simulation for legacy chains (#3792)

BUG FIXES

• Allow relaying ICS-04 packets with non-UTF-8 payloads (#3770)
  Hermes does not assume anymore that an ICS-04 packet data is valid UTF-8,
  by using the packet_data_hex attribute when assembling a packet from events, instead of the deprecated packet_data attribute.
  Relying on the packet_data attribute enforces a UTF-8 encoded payload (eg. JSON), disallowing eg. Protobuf-encoded payloads.
  The packet_data attribute has been deprecated in favor of packet_data_hex since IBC-Go v1.0.0.
• Improve reliability of compatibility check and fix parsing of expected modules versions (#3831)

FEATURES

• Add a per-chain configuration excluded_sequences allowing users to specify a list of packet sequences which will not be cleared.
  This configuration has no impact on standard packet relaying. (#3754)
• Add a per-chain configuration memo_overwrite allowing users to overwrite the relayer memo used for each transaction (#3811)
• Added a new Prometheus metric simulate_errors for tracking when a transaction simulation fails, with the following labels: (#3845)

  • recoverable (can the execution continue if this happened?)

  • account (account from which the tx was sent)

  • error_description (description of the error)

    # HELP simulate_errors_total Number of errors observed by Hermes when simulating a Tx
    # TYPE simulate_errors_total counter
    simulate_errors_total{account="osmo17ndx5qfku28ymxgmq6zq4a6d02dvpfjjul0hyh",error_description="Unknown error",recoverable="false",service_name="unknown_service",otel_scope_name="hermes",otel_scope_version=""} 4
    

IMPROVEMENTS

• Use the consensus state at client latest height in status CLI (#3814)
• Add syncing check for gRPC node (#3814)
• Improve the log diagnostic when an out of gas error is thrown. A new entry related to gas error has been added to the Hermes guide. (#3530)
• Improve resilience when relaying on ordered channels.
  When relaying packets on an ordered channel, Hermes will now attempt to detect whether the next message to send has the sequence number expected on that channel. If there is a mismatch, then Hermes will trigger a packet clear on the channel to unblock it before resuming operations on that channel. (#3540)
• Recover from gas simulation failures on legacy chains. (#3792)

v1.8.0

January 23rd, 2024

This v1.8.0 release introduces new features and improvements to Hermes.

One key feature is that Hermes is now compatible with both the legacy UpgradeProposal and the newer MsgIbcSoftwareUpgrade message when upgrading a chain.
This allows Hermes to be compatible with ibc-go v8.0.0. The compatibility check that Hermes performs on startup has been updated to reflect this.

Additional configuration settings have been added:

• The new global settings ics20_max_memo_size and ics20_max_receiver_size allow users to specify a limit for the size of the memo and receiver fields for ICS20 packets. Any packet with either field having a size exceeding the configured values will not be relayed.
• The new per-chain setting query_packets_chunk_size allows users to specify how many packets are queried at once from the chain when clearing pending packets. This is useful to tweak when there are many large pending packets and the RPC endpoints times out or refuses to answer the pending packets query.
• The new per-chain setting client_refresh_rate can be use to specify how often the clients referencing this chain should be refreshed. The rate is expressed as a fraction of the trusting period.
• The new per-chain setting dynamic_gas_price can be enabled to have the relayer query for and use a dynamic gas price instead of using the static gas_price specified in the config. This should only be used for chains which have a EIP-1559-like fee market enabled and support the osmosis.txfees.v1beta1.Query/GetEipBaseFee gRPC query.

Telemetry now features new metrics:

• Monitoring the ICS20 packets filtered due to the memo and/or receiver field size exceeding the configured limits.
• Monitoring the distribution of dynamic gas fees queried from the chain, if enabled.

BREAKING CHANGES

• Bump MSRV to 1.71 (#3688)

FEATURES

• Relayer

  • Use legacy UpgradeProposal or newer MsgIbcSoftwareUpgrade message when upgrading
    a chain depending on whether the chain is running IBC-Go v8 or older.
    (#3696)

  • Add a new per-chain configuration table dynamic_gas_price which enables
    querying the current gas price from the chain instead of the static gas_price,
    when the chain has EIP-1559-like dynamic gas price.
    The new configuration setting can be configured per-chain as follows:

    dynamic_gas_price = { enabled = true, multiplier = 1.1, max = 0.6 }

    At the moment, only chains which support the osmosis.txfees.v1beta1.Query/GetEipBaseFee
    query can be used with dynamic gas price enabled.
    (#3738)

  • Add two new packet configurations:

    • ics20_max_memo_size which filters ICS20 packets with memo field bigger than the configured value
    • ics20_max_receiver_size which filters ICS20 packets with receiver field bigger than the configured value
      (#3766)

  • Add a client_refresh_rate setting to specify the rate at which to refresh clients referencing this chain, relative to its trusting period.
    (#3402)

  • Add a --packet-sequences flag to the clear packets, tx packet-recv, and tx packet-ack commands.
    When this flag is specified, these commands will only clear the packets with the specified sequence numbers
    on the given chain. If not provided, all pending packets will be cleared on both chains, as before.
    (#3672)

    This flag takes either a single sequence number or a range of sequences numbers.
    Each element of the comma-separated list must be either a single sequence number or
    a range of sequence numbers.

    Examples:

    • 10 will clear a single packet with sequence number 10
    • 1,2,3 will clear packets with sequence numbers 1, 2, 3
    • 1..5 will clear packets with sequence numbers 1, 2, 3, 4, 5
    • ..5 will clear packets with sequence numbers 1, 2, 3, 4, 5
    • 5.. will clear packets with sequence numbers greater than or equal to 5
    • ..5,10..20,25,30.. will clear packets with sequence numbers 1, 2, 3, 4, 5, 10, 11, ..., 20, 25, 30, 31, ...
    • ..5,10..20,25,30.. will clear packets with sequence numbers 1, 2, 3, 4, 5, 10, 11, ..., 20, 25, 30, 31, ...

  • Add a --gov-account option to hermes tx upgrade-chain to specify the authority account used to sign upgrade proposal for chains running IBC-Go v8+.
    (#3696)

  • Add a query_packets_chunk_size config option and a --query-packets-chunk-size flag to the clear packets CLI to configure how
    many packets to query at once from the chain when clearing pending packets. Lower this setting if one or more of packets you are
    trying to clear are huge and make the packet query time out or fail.
    (#3743)

• Telemetry & Metrics
  • Add three metrics related to EIP gas price:
  • dynamic_gas_queried_fees contains data on the queried values before applying any filter
  • dynamic_gas_queried_success_fees contains data on the queried values if the query was successful and before applying any filter
  • dynamic_gas_paid_fees contains data on the queried values after applying the max filter
    (#3738)
  • Add a new metric filtered_packets which counts the number of packets filtered due to having a memo or receiver field too big
    (#3794)
• Integration Test Framework
  • Add a test for asynchronous Interchain Query relaying
    (#3455)
  • Add an ICA test to assert a channel correctly closes after a packet time-outs
    (#3778)

IMPROVEMENTS

• Relayer CLI
  • Update compatibility check to allow IBC-Go 4.1.1 to 8.x and SDK 0.45.x to 0.50.x.
    (#3745)