2jciebu-usb-raspberrypi

It is a sample program for evaluating Omron's sensor 2JCIE-BU with Raspberry Pi 3 Model B.

2JCIE-BU is a multifunction sensor module that can be used for sensing various environmental information.
Various sensors such as temperature, humidity, light, barometric pressure, noise, 3 axis acceleration, etc. are equipped.
Earthquakes can be judged based on highly accurate vibration acceleration.
We utilize a volatile organic compound (VOC GAS) sensor to realize continuous monitoring of indoor air quality.
USB and Bluetooth® are provided as interfaces.

language

• English
• Japanase

Description

• sample_2jciebu.py
  It is a sample program that can acquire sensing data with the USB serial interface and check it on the console.
  The LED lights up while data is being acquired.

DEMO:
When you run sample_2jciebu.py, you can see the sensing data on console.

Installation

1. It is necessary to install dependency software beforehand.
   Dependencies
2. Open Terminal and execute the following command.

   $ mkdir omron_sensor
   $ cd omron_sensor
   $ git clone https://github.com/omron-devhub/2jciebu-usb-raspberrypi.git
   

Usage

Procedure to operate the sample program.

• sample_2jciebu.py
  Open Terminal and execute the following command.

  $ sudo modprobe ftdi_sio
  $ sudo chmod 777 /sys/bus/usb-serial/drivers/ftdi_sio/new_id
  $ sudo echo 0590 00d4 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
  $ sudo python3 sample_2jciebu.py
  

  To stop, press Ctrl + C.

Dependencies

2jciebu-usb-raspberrypi requires the following dependencies:

• Python3
• pyserial

Contributors

Thank you to all our contributors !

Licence

Copyright (c) OMRON Corporation. All rights reserved.

Licensed under the MIT License.