Contents
This is a python package for doing fast elliptic curve cryptography, specifically digital signatures.
There is no nonce reuse, no branching on secret material, and all points are validated before any operations are performed on them. Timing side challenges are mitigated via Montgomery point multiplication. Nonces are generated per RFC6979. The default curve used throughout the package is P256 which provides 128 bits of security. If you require a higher level of security you can specify the curve parameter in a method to use a curve over a bigger field e.g. P384. All that being said, crypto is tricky and I'm not beyond making mistakes. Please use a more established and reviewed library for security critical applications. Open an issue or email me if you see any security issue or risk with this library.
The initial release of this package was targeted at python2.7. Earlier versions may work but have no guarantee of correctness or stability. As of release 1.2.1+ python3 is supported as well. Due to python2's EOL on January 1st 2020 release 2.x of this package only supports python3.5+.
This package is targeted at the Linux and MacOS operating systems. Due to the the dependency on the GMP C library building this package on Windows is difficult and no official support or distributions are provided for Windows OSes. See issue11 for what users have done to get things building.
| Name | Class | Proposed By |
|---|---|---|
| P192 / secp192r1 | fastecdsa.curve.P192 |
NIST / NSA |
| P224 / secp224r1 | fastecdsa.curve.P224 |
NIST / NSA |
| P256 / secp256r1 | fastecdsa.curve.P256 |
NIST / NSA |
| P384 / secp384r1 | fastecdsa.curve.P384 |
NIST / NSA |
| P521 / secp521r1 | fastecdsa.curve.P521 |
NIST / NSA |
| secp192k1 | fastecdsa.curve.secp192k1 |
Certicom |
| secp224k1 | fastecdsa.curve.secp224k1 |
Certicom |
| secp256k1 (bitcoin curve) | fastecdsa.curve.secp256k1 |
Certicom |
| brainpoolP160r1 | fastecdsa.curve.brainpoolP160r1 |
BSI |
| brainpoolP192r1 | fastecdsa.curve.brainpoolP192r1 |
BSI |
| brainpoolP224r1 | fastecdsa.curve.brainpoolP224r1 |
BSI |
| brainpoolP256r1 | fastecdsa.curve.brainpoolP256r1 |
BSI |
| brainpoolP320r1 | fastecdsa.curve.brainpoolP320r1 |
BSI |
| brainpoolP384r1 | fastecdsa.curve.brainpoolP384r1 |
BSI |
| brainpoolP512r1 | fastecdsa.curve.brainpoolP512r1 |
BSI |
As of version 1.5.1 construction of arbitrary curves in Weierstrass form
(y^2 = x^3 + ax + b (mod p)) is supported. I advise against using custom curves for any
security critical applications. It's up to you to make sure that the parameters you pass here are
correct, no validation of the base point is done, and in general no sanity checks are done. Use
at your own risk.
from fastecdsa.curve import Curve
curve = Curve(
name, # (str): The name of the curve
p, # (long): The value of p in the curve equation.
a, # (long): The value of a in the curve equation.
b, # (long): The value of b in the curve equation.
q, # (long): The order of the base point of the curve.
gx, # (long): The x coordinate of the base point of the curve.
gy, # (long): The y coordinate of the base point of the curve.
oid # (str): The object identifier of the curve (optional).
)Any hash function in the hashlib module (md5, sha1, sha224, sha256, sha384, sha512)
will work, as will any hash function that implements the same interface / core functionality as the
those in hashlib. For instance, if you wish to use SHA3 as the hash function the
pysha3 package will work with this library as long as it is at version >=1.0b1 (as previous
versions didn't work with the hmac module which is used in nonce generation). Note
that sha3_224, sha3_256, sha3_384, sha3_512 are all in hashlib as of python3.6.
Currently it does elliptic curve arithmetic significantly faster than the ecdsa
package. You can see the times for 1,000 signature and verification operations over
various curves below. These were run on an early 2014 MacBook Air with a 1.4 GHz Intel
Core i5.
| Curve | fastecdsa time |
ecdsa time |
Speedup |
| P192 | 3.62s | 1m35.49s | ~26x |
| P224 | 4.50s | 2m13.42s | ~29x |
| P256 | 6.15s | 2m52.43s | ~28x |
| P384 | 12.11s | 6m21.01s | ~31x |
| P521 | 22.21s | 11m39.53s | ~31x |
| secp256k1 | 5.92s | 2m57.19s | ~30x |
If you'd like to benchmark performance on your machine you can do so using the command:
$ python setup.py benchmarkThis will use the timeit module to benchmark 1000 signature and verification operations
for each curve supported by this package. Alternatively, if you have not cloned the repo but
have installed the package via e.g. pip you can use the following command:
$ python -m fastecdsa.benchmarkYou can use pip: $ pip install fastecdsa or clone the repo and use
$ python setup.py install. Note that you need to have a C compiler.
You also need to have GMP on your system as the underlying
C code in this package includes the gmp.h header (and links against gmp
via the -lgmp flag). You can install all dependencies as follows:
$ sudo apt-get install python-dev libgmp3-dev$ sudo yum install python-devel gmp-develYou can use this package to generate keys if you like. Recall that private keys on elliptic curves are integers, and public keys are points i.e. integer pairs.
from fastecdsa import keys, curve
"""The reason there are two ways to generate a keypair is that generating the public key requires
a point multiplication, which can be expensive. That means sometimes you may want to delay
generating the public key until it is actually needed."""
# generate a keypair (i.e. both keys) for curve P256
priv_key, pub_key = keys.gen_keypair(curve.P256)
# generate a private key for curve P256
priv_key = keys.gen_private_key(curve.P256)
# get the public key corresponding to the private key we just generated
pub_key = keys.get_public_key(priv_key, curve.P256)Some basic usage is shown below:
from fastecdsa import curve, ecdsa, keys
from hashlib import sha384
m = "a message to sign via ECDSA" # some message
''' use default curve and hash function (P256 and SHA2) '''
private_key = keys.gen_private_key(curve.P256)
public_key = keys.get_public_key(private_key, curve.P256)
# standard signature, returns two integers
r, s = ecdsa.sign(m, private_key)
# should return True as the signature we just generated is valid.
valid = ecdsa.verify((r, s), m, public_key)
''' specify a different hash function to use with ECDSA '''
r, s = ecdsa.sign(m, private_key, hashfunc=sha384)
valid = ecdsa.verify((r, s), m, public_key, hashfunc=sha384)
''' specify a different curve to use with ECDSA '''
private_key = keys.gen_private_key(curve.P224)
public_key = keys.get_public_key(private_key, curve.P224)
r, s = ecdsa.sign(m, private_key, curve=curve.P224)
valid = ecdsa.verify((r, s), m, public_key, curve=curve.P224)
''' using SHA3 via pysha3>=1.0b1 package '''
import sha3 # pip install [--user] pysha3==1.0b1
from hashlib import sha3_256
private_key, public_key = keys.gen_keypair(curve.P256)
r, s = ecdsa.sign(m, private_key, hashfunc=sha3_256)
valid = ecdsa.verify((r, s), m, public_key, hashfunc=sha3_256)The Point class allows arbitrary arithmetic to be performed over curves. The two main
operations are point addition and point multiplication (by a scalar) which can be done via the
standard python operators (+ and * respectively):
# example taken from the document below (section 4.3.2):
# https://koclab.cs.ucsb.edu/teaching/cren/docs/w02/nist-routines.pdf
from fastecdsa.curve import P256
from fastecdsa.point import Point
xs = 0xde2444bebc8d36e682edd27e0f271508617519b3221a8fa0b77cab3989da97c9
ys = 0xc093ae7ff36e5380fc01a5aad1e66659702de80f53cec576b6350b243042a256
S = Point(xs, ys, curve=P256)
xt = 0x55a8b00f8da1d44e62f6b3b25316212e39540dc861c89575bb8cf92e35e0986b
yt = 0x5421c3209c2d6c704835d82ac4c3dd90f61a8a52598b9e7ab656e9d8c8b24316
T = Point(xt, yt, curve=P256)
# Point Addition
R = S + T
# Point Subtraction: (xs, ys) - (xt, yt) = (xs, ys) + (xt, -yt)
R = S - T
# Point Doubling
R = S + S # produces the same value as the operation below
R = 2 * S # S * 2 works fine too i.e. order doesn't matter
d = 0xc51e4753afdec1e6b6c6a5b992f43f8dd0c7a8933072708b6522468b2ffb06fd
# Scalar Multiplication
R = d * S # S * d works fine too i.e. order doesn't matter
e = 0xd37f628ece72a462f0145cbefe3f0b355ee8332d37acdd83a358016aea029db7
# Joint Scalar Multiplication
R = d * S + e * TYou can also export keys as files, ASN.1 encoded and formatted per RFC5480 and RFC5915. Both private keys and public keys can be exported as follows:
from fastecdsa.curve import P256
from fastecdsa.keys import export_key, gen_keypair
d, Q = gen_keypair(P256)
# save the private key to disk
export_key(d, curve=P256, filepath='/path/to/exported/p256.key')
# save the public key to disk
export_key(Q, curve=P256, filepath='/path/to/exported/p256.pub')Keys stored in this format can also be imported. The import function will figure out if the key is a public or private key and parse it accordingly:
from fastecdsa.keys import import_key
# if the file is a private key then parsed_d is a long and parsed_Q is a Point object
# if the file is a public key then parsed_d will be None
parsed_d, parsed_Q = import_key('/path/to/file.key')Other encoding formats can also be specified, such as SEC1 for public keys. This is done using
classes found in the fastecdsa.encoding package, and passing them as keyword args to
the key functions:
from fastecdsa.curve import P256
from fastecdsa.encoding.sec1 import SEC1Encoder
from fastecdsa.keys import export_key, gen_keypair, import_key
_, Q = gen_keypair(P256)
export_key(Q, curve=P256, filepath='/path/to/p256.key', encoder=SEC1Encoder)
parsed_Q = import_key('/path/to/p256.key', curve=P256, public=True, decoder=SEC1Encoder)DER encoding of ECDSA signatures as defined in RFC2459 is also supported. The
fastecdsa.encoding.der provides the DEREncoder class which encodes signatures:
from fastecdsa.encoding.der import DEREncoder
r, s = 0xdeadc0de, 0xbadc0de
encoded = DEREncoder.encode_signature(r, s)
decoded_r, decoded_s = DEREncoder.decode_signature(encoded)Thanks to those below for contributing improvements:
- boneyard93501
- clouds56
- m-kus
- sirk390
- targon
- NotStatilko
- bbbrumley
- luinxz
- JJChiDguez
- J08nY
- trevor-crypto