Icinga check command for Proxmox VE via API
This check command depends on Python 3 and the following modules:
- requests
- argparse
- packaging
Installation on Debian / Ubuntu
apt install python3 python3-requests python3-packaging
Installation on Rocky / Alma Linux 9
yum install python3 python3-requests python3-packaging
Installation on FreeBSD
pkg install python3 py39-requests py39-packaging
Installation from requirements file
pip3 install -r requirements.txt
Installation as Docker container
docker build -t check_pve .
After this, you can start the container like so:
docker run -d --name check_pve --rm check_pve
The container will keep running without having the need for any of the requirements listed above (for environments that do not support this). Running a check is as simple as:
docker exec check_pve python check_pve.py ....rest of the default arguments listed below....
Create a role named Monitoring and assign necessary privileges:
pveum roleadd Monitoring
pveum rolemod Monitoring --privs VM.Monitor,Sys.Audit,Sys.Modify,Datastore.Audit,VM.Audit
Create a user named monitoring and set password:
pveum useradd monitoring@pve --comment "The ICINGA 2 monitoring user"
Create an API token named monitoring for the user monitoring:
pveum user token add monitoring@pve monitoring
Please save the token secret as there isn't any way to fetch it at a later point.
Assign role monitoring to token monitoring and the user monitoring@pve:
pveum acl modify / --roles Monitoring --user 'monitoring@pve'
pveum acl modify / --roles Monitoring --tokens 'monitoring@pve!monitoring'
Set password for the user monitoring:
pveum passwd monitoring@pve
Assign monitoring role to user monitoring
pveum acl modify / --users monitoring@pve --roles Monitoring
For further information about the Proxmox VE privilege system have a look into the documentation.
The icinga2 folder contains the command definition and service examples for use with Icinga2.
usage: check_pve.py [-h] -e API_ENDPOINT [--api-port API_PORT] -u API_USER (-p API_PASSWORD | -t API_TOKEN) [-k] -m
{cluster,version,cpu,memory,swap,storage,io_wait,io-wait,updates,services,subscription,vm,vm_status,vm-status,replication,disk-health,ceph-health,zfs-health,zfs-fragmentation,backup} [-n NODE] [--name NAME]
[--vmid VMID] [--expected-vm-status {running,stopped,paused}] [--ignore-vm-status] [--ignore-service NAME] [--ignore-disk NAME] [-w THRESHOLD_WARNING] [-c THRESHOLD_CRITICAL] [-M] [-V MIN_VERSION]
[--unit {GB,MB,KB,GiB,MiB,KiB,B}]
Check command for PVE hosts via API
options:
-h, --help show this help message and exit
API Options:
-e API_ENDPOINT, -H API_ENDPOINT, --api-endpoint API_ENDPOINT
PVE api endpoint hostname or ip address (no additional data like paths)
--api-port API_PORT PVE api endpoint port
-u API_USER, --username API_USER
PVE api user (e.g. icinga2@pve or icinga2@pam, depending on which backend you have chosen in proxmox)
-p API_PASSWORD, --password API_PASSWORD
PVE API user password
-t API_TOKEN, --api-token API_TOKEN
PVE API token (format: TOKEN_ID=TOKEN_SECRET
-k, --insecure Don't verify HTTPS certificate
Check Options:
-m {cluster,version,cpu,memory,swap,storage,io_wait,io-wait,updates,services,subscription,vm,vm_status,vm-status,replication,disk-health,ceph-health,zfs-health,zfs-fragmentation,backup}, --mode {cluster,version,cpu,memory,swap,storage,io_wait,io-wait,updates,services,subscription,vm,vm_status,vm-status,replication,disk-health,ceph-health,zfs-health,zfs-fragmentation,backup}
Mode to use.
-n NODE, --node NODE Node to check (necessary for all modes except cluster, version and backup)
--name NAME Name of storage, vm, or container
--vmid VMID ID of virtual machine or container
--expected-vm-status {running,stopped,paused}
Expected VM status
--ignore-vm-status Ignore VM status in checks
--ignore-service NAME
Ignore service NAME in checks
--ignore-disk NAME Ignore disk NAME in health check
-w THRESHOLD_WARNING, --warning THRESHOLD_WARNING
Warning threshold for check value. Mutiple thresholds with name:value,name:value
-c THRESHOLD_CRITICAL, --critical THRESHOLD_CRITICAL
Critical threshold for check value. Mutiple thresholds with name:value,name:value
-M Values are shown in the unit which is set with --unit (if available). Thresholds are also treated in this unit
-V MIN_VERSION, --min-version MIN_VERSION
The minimal pve version to check for. Any version lower than this will return CRITICAL.
--unit {GB,MB,KB,GiB,MiB,KiB,B}
Unit which is used for performance data and other values
Check cluster health
./check_pve.py -u <API_USER> -t <API_TOKEN> -e <API_ENDPOINT> -m cluster
OK - Cluster 'proxmox1' is healthy'
Check PVE version
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m version -V 5.0.0
OK - Your pve instance version '5.2' (0fcd7879) is up to date
Check CPU load
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m cpu -n node1
OK - CPU usage is 2.4%|usage=2.4%;;
Check memory usage
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m memory -n node1
OK - Memory usage is 37.44%|usage=37.44%;; used=96544.72MB;;;257867.91
Check disk-health
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m disk-health -n node1
OK - All disks are healthy|wearout_sdb=96%;; wearout_sdc=96%;; wearout_sdd=96%;; wearout_sde=96%;;
Check storage usage
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m storage -n node1 --name local
OK - Storage usage is 54.23%|usage=54.23%;; used=128513.11MB;;;236980.36
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m storage -n node1 --name vms-disx
CRITICAL - Storage 'vms-disx' doesn't exist on node 'node01'
Check subscription status
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m subscription -n node1 -w 50 -c 10
OK - Subscription of level 'Community' is valid until 2019-01-09
Check VM status
Without specifying a node name:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-vm
OK - VM 'test-vm' is running on 'node1'|cpu=1.85%;; memory=8.33%;;
You can also pass a container name for the VM check:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-lxc
OK - LXC 'test-lxc' on node 'node1' is running|cpu=0.11%;; memory=13.99%;;
With memory thresholds:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-vm -w 50 -c 80
OK - VM 'test-vm' is running on 'node1'|cpu=1.85%;; memory=40.33%;50.0;80.0
With a specified node name, the check plugin verifies on which node the VM runs.
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm -n node1 --name test-vm
OK - VM 'test-vm' is running on node 'node1'|cpu=1.85%;; memory=8.33%;;
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm -n node1 --name test-vm
WARNING - VM 'test-vm' is running on node 'node2' instead of 'node1'|cpu=1.85%;; memory=8.33%;;
If you only want to gather metrics and don't care about the vm status add the --ignore-vm-status flag:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-vm --ignore-vm-status
OK - VM 'test-vm' is not running
Specify the expected VM status:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-vm --expected-vm-status stopped
OK - VM 'test-vm' is not running
For hostalive checks without gathering performance data use vm_status instead of vm. The parameters are the same as with vm.
Check swap usage
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m swap -n pve
OK - Swap usage is 0.0 %|usage=0.0%;; used=0.0MB;;;8192.0
Check storage replication status
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m replication -n node1
OK - No failed replication jobs on node1
Check ceph cluster health
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m ceph-health
WARNING - Ceph Cluster is in warning state
Check ZFS pool health
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m zfs-health -n pve
OK - All ZFS pools are healthy
Check for specific pool:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m zfs-health -n pve --name rpool
OK - ZFS pool 'rpool' is healthy
Check ZFS pool fragmentation
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m zfs-fragmentation -n pve -w 40 -c 60
CRITICAL - 2 of 2 ZFS pools are above fragmentation thresholds:
- rpool (71 %) is CRITICAL
- diskpool (50 %) is WARNING
|fragmentation_diskpool=50%;40.0;60.0 fragmentation_rpool=71%;40.0;60.0
Check for specific pool:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m zfs-fragmentation -n pve --name diskpool -w 40 -c 60
WARNING - Fragmentation of ZFS pool 'diskpool' is above thresholds: 50 %|fragmentation=50%;40.0;60.0
Check VZDump Backups
Check task history on all nodes:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m backup
CRITICAL - 8 backup tasks successful, 3 backup tasks failed
Check for specific node and time frame:
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m backup -n pve -c 86400
OK - 2 backup tasks successful, 0 backup tasks failed within the last 86400.0s
You can either specify a threshold for warning or critical which is applied to all metrics or define individual thresholds like this (name:value,name:value,...):
./check_pve.py -u <API_USER> -p <API_PASSWORD> -e <API_ENDPOINT> -m vm --name test-vm -w memory:50 -c cpu:50,memory:80
OK - VM 'test-vm' is running on 'node1'|cpu=1.85%;50.0; memory=40.33%;50.0;80.0
Verify that your DNS server is working and can resolve your hostname. If everything is fine check for proxyserver environment variables (HTTP_PROXY,HTTPS_PROXY), which maybe not allow communication to port 8006.
Thank you to everyone, who is contributing to check_pve: https://github.com/nbuchwitz/check_pve/graphs/contributors.