fix(zsh): portable p10k prompt

topic:fixzsh-portable-p10k-prompt
kaihowl · Dec 17, 2024 · ca87cd2 · ca87cd2
1 parent ffd39a8
commit ca87cd2
Showing 1 changed file with 42 additions and 42 deletions.
diff --git a/zsh/p10k.zsh.symlink b/zsh/p10k.zsh.symlink
@@ -1,7 +1,7 @@
-# Generated by Powerlevel10k configuration wizard on 2024-12-10 at 20:52 CET.
-# Based on romkatv/powerlevel10k/config/p10k-lean.zsh.
-# Wizard options: powerline, unicode, lean, 2 lines, solid, no frame, darkest-ornaments,
-# sparse, concise, instant_prompt=verbose.
+# Generated by Powerlevel10k configuration wizard on 2024-12-17 at 12:28 UTC.
+# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 26839.
+# Wizard options: ascii, lean, 2 lines, solid, darkest-ornaments, sparse, concise,
+# instant_prompt=verbose.
 # Type `p10k configure` to generate another config.
 #
 # Config for Powerlevel10k with lean prompt style. Type `p10k configure` to generate
@@ -116,7 +116,7 @@
   )
 
   # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
-  typeset -g POWERLEVEL9K_MODE=powerline
+  typeset -g POWERLEVEL9K_MODE=ascii
   # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
   # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
   typeset -g POWERLEVEL9K_ICON_PADDING=none
@@ -162,16 +162,16 @@
   # probably want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false above and
   # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below.
   typeset -g POWERLEVEL9K_SHOW_RULER=false
-  typeset -g POWERLEVEL9K_RULER_CHAR='─'        # reasonable alternative: '·'
+  typeset -g POWERLEVEL9K_RULER_CHAR='-'        # reasonable alternative: '·'
   typeset -g POWERLEVEL9K_RULER_FOREGROUND=238
 
-  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─'
+  # Filler between left and right prompt on the first prompt line. You can set it to '·' or '-'
   # to make it easier to see the alignment between left and right prompt and to separate prompt
   # from command output. It serves the same purpose as ruler (see above) without increasing
   # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
   # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact
   # prompt.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='─'
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='-'
   if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
     # The color of the filler.
     typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=238
@@ -197,13 +197,13 @@
   # Red prompt symbol if the last command failed.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
   # Default prompt symbol.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
   # Prompt symbol in command vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
   # Prompt symbol in visual vi mode.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
   # Prompt symbol in overwrite vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
   typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
   # No line terminator if prompt_char is the last segment.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
@@ -288,7 +288,7 @@
 
   # The default icon shown next to non-writable and non-existent directories when
   # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
-  typeset -g POWERLEVEL9K_LOCK_ICON='∅'
+  # typeset -g POWERLEVEL9K_LOCK_ICON='⭐'
 
   # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
   # directories. It must be an array with 3 * N elements. Each triplet consists of:
@@ -354,7 +354,7 @@
 
   # Formatter for Git status.
   #
-  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  # Example output: master wip <42>42 *42 merge ~42 +42 !42 ?42.
   #
   # You can edit the function to customize how Git status looks.
   #
@@ -391,9 +391,9 @@
     if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
       local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
       # If local branch name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show local branch name in full without truncation, delete the next line.
-      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
+      (( $#branch > 32 )) && branch[13,-13]=".."  # <-- this line
       res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
     fi
 
@@ -404,9 +404,9 @@
         ]]; then
       local tag=${(V)VCS_STATUS_TAG}
       # If tag name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show tag name in full without truncation, delete the next line.
-      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
+      (( $#tag > 32 )) && tag[13,-13]=".."  # <-- this line
       res+="${meta}#${clean}${tag//\%/%%}"
     fi
 
@@ -426,21 +426,21 @@
     fi
 
     if (( VCS_STATUS_COMMITS_AHEAD || VCS_STATUS_COMMITS_BEHIND )); then
-      # ⇣42 if behind the remote.
-      (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
-      # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
+      # <42 if behind the remote.
+      (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
+      # >42 if ahead of the remote; no leading space if also behind the remote: <42>42.
       (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
-      (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
+      (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}>${VCS_STATUS_COMMITS_AHEAD}"
     elif [[ -n $VCS_STATUS_REMOTE_BRANCH ]]; then
       # Tip: Uncomment the next line to display '=' if up to date with the remote.
       # res+=" ${clean}="
     fi
 
-    # ⇠42 if behind the push remote.
-    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
+    # <-42 if behind the push remote.
+    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}<-${VCS_STATUS_PUSH_COMMITS_BEHIND}"
     (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
-    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
-    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
+    # ->42 if ahead of the push remote; no leading space if also behind: <-42->42.
+    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}->${VCS_STATUS_PUSH_COMMITS_AHEAD}"
     # *42 if have stashes.
     (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
     # 'merge' if the repo is in an unusual state.
@@ -455,12 +455,12 @@
     # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
     # Remove the next line if you don't want to see untracked files at all.
     (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
-    # "─" if the number of unstaged files is unknown. This can happen due to
+    # "-" if the number of unstaged files is unknown. This can happen due to
     # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
     # than the number of files in the Git index, or due to bash.showDirtyState being set to false
     # in the repository config. The number of staged and untracked files may also be unknown
     # in this case.
-    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
+    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}-"
 
     typeset -g my_git_format=$res
   }
@@ -516,32 +516,32 @@
   # it will signify success by turning green.
   typeset -g POWERLEVEL9K_STATUS_OK=false
   typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='ok'
 
   # Status when some part of a pipe command fails but the overall exit status is zero. It may look
   # like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=70
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='ok'
 
   # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=false
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='err'
 
   # Status when the last command was terminated by a signal.
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='err'
 
   ###################[ command_execution_time: duration of the last command ]###################
   # Show duration of the last command if takes at least this many seconds.
@@ -563,7 +563,7 @@
   # Background jobs color.
   typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=70
   # Custom icon.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='≡'
+  # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #######################[ direnv: direnv status (https://direnv.net/) ]########################
   # Direnv color.
@@ -718,13 +718,13 @@
   typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION=
   typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION=
   # Custom icon.
-  typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='nord'
+  # typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]##################
   # Ranger shell color.
   typeset -g POWERLEVEL9K_RANGER_FOREGROUND=178
   # Custom icon.
-  typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲'
+  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]#######################
   # Nnn shell color.
@@ -839,11 +839,11 @@
   ###########[ timewarrior: timewarrior tracking status (https://timewarrior.net/) ]############
   # Timewarrior color.
   typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=110
-  # If the tracked task is longer than 24 characters, truncate and append "…".
+  # If the tracked task is longer than 24 characters, truncate and append "..".
   # Tip: To always display tasks without truncation, delete the following parameter.
   # Tip: To hide task names and display just the icon when time tracking is enabled, set the
   # value of the following parameter to "".
-  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}'
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+..}'
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
@@ -1257,7 +1257,7 @@
       # '*test*'  TEST    # to match your needs. Customize them as needed.
       '*'       DEFAULT)
   typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=134
-  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='○'
+  # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
   # segment. Parameter expansions are very flexible and fast, too. See reference:
@@ -1392,7 +1392,7 @@
   # AWS Elastic Beanstalk environment color.
   typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=70
   # Custom icon.
-  typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='eb'
+  # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
   # Show azure only when the command you are typing invokes one of these tools.
@@ -1574,7 +1574,7 @@
   #   P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
   #   P9K_IP_RX_RATE        | receive rate (since last prompt)
   #   P9K_IP_TX_RATE        | send rate (since last prompt)
-  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %70F⇣$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %215F⇡$P9K_IP_TX_RATE}'
+  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='$P9K_IP_IP${P9K_IP_RX_RATE:+ %70F<$P9K_IP_RX_RATE}${P9K_IP_TX_RATE:+ %215F>$P9K_IP_TX_RATE}'
   # Show information for the first network interface whose name matches this regular expression.
   # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
   typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
@@ -1596,7 +1596,7 @@
   # Show battery in yellow when it's discharging.
   typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=178
   # Battery pictograms going from low to high level of charge.
-  typeset -g POWERLEVEL9K_BATTERY_STAGES=('%K{232}▁' '%K{232}▂' '%K{232}▃' '%K{232}▄' '%K{232}▅' '%K{232}▆' '%K{232}▇' '%K{232}█')
+  typeset -g POWERLEVEL9K_BATTERY_STAGES=('battery')
   # Don't show the remaining time to charge/discharge.
   typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
 
@@ -1646,7 +1646,7 @@
   #
   # Type `p10k help segment` for documentation and a more sophisticated example.
   function prompt_example() {
-    p10k segment -f 208 -i '⭐' -t 'hello, %n'
+    p10k segment -f 208 -i '*' -t 'hello, %n'
   }
 
   # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job