nt535-freebsd-sleepd

Daemon handle between sleep button and ACPI for Foxconn NettopNT535 machines on FreeBSD. Fixes the issue with the sleep button not causing the machine to sleep.

Installation

The following steps are required to setup nt535sleepd.

Note: don't confuse the nt535sleepd file in the root project directory which is a rc.d script with the nt535sleepd binary that is dumped in build/ after running make. The former will be referred as rc.d nt535sleepd script and the latter will be referred as nt535sleepd binary.

1. After cloning and entering the project's root directory, install libinput with pkg install libinput.
2. Move the rc.d nt535sleepd script into /etc/rc.d/ directory by running mv nt535sleepd /etc/rc.d/. Then, change the owner and group to root:wheel by running chown root:wheel /etc/rc.d/nt535sleepd.
3. Build the nt535sleepd binary by running make.
4. Move the rc.d nt535sleepd binary into /usr/sbin/ directory by running mv build/nt535sleepd /usr/sbin/. Then, change the owner and group to root:wheel by running chown root:wheel /usr/sbin/nt535sleepd. Afterwards, grant exec privileges by running chmod +x /usr/sbin/nt535sleepd.
5. Enable the daemon by adding the nt535sleepd_enable="YES" entry into /etc/rc.conf.

All testing done on FreeBSD 13.0.