Skip to content

Planning for robotic exploration based on forward simulation

License

Notifications You must be signed in to change notification settings

laurimi/ase_exploration

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Forward-simulation based planning for robotic exploration

The software contained in the ase_exploration package is a ROS integrated planner for robotic exploration tasks, taking as input data from various costmaps and outputting new exploration targets for the robot. To execute the exploration task, this software uses move_base. In order to use this software, you will need to have properly configured move_base to run on your robot.

The planner software uses layers of costmaps to track free, occupied, and unknown space. Based on this information, it will sample possible trajectories and sensor readings, and iteratively improve the trajectories to maximize the mutual information of the map and future observations. Based on a few heuristic rules, the planner detects whether the robot might be stuck or if the local trajectories it has sampled are not very informative. If this happens, the planner will instead apply classical frontier-based exploration to select the next exploration target, and afterwards again resumes planning via forward simulation of local trajectories. For technical details on the approach, please refer to the publication listed below.

The basic interface is through ROS actions - as long as an request for exploration provided in the form of an action is active, the planner will keep producing new exploration targets. The process is stopped when an error occurs, or when the user cancels the action. The software will pass any exploration targets it computes to move_base via a move_base_msgs::MoveBaseAction type action.

Video and publication

Click the link below to view a video showing the software in action: Planning for robotic exploration based on forward simulation

Further details are available in our journal paper on the subject. If you use this code in an academic context, please cite the paper:

Mikko Lauri, Risto Ritala. Planning for robotic exploration based on forward simulation, Robotics and Autonomous Systems, Vol 83, (2016), pp. 15-31, DOI: 10.1016/j.robot.2016.06.008

A preprint version is also available on arXiv.

BiBTeX:

@article{Lauri2016planning,
  author  = {Mikko Lauri and Risto Ritala}, 
  title   = {Planning for robotic exploration based on forward simulation},
  journal = {Robotics and Autonomous Systems},
  year    = 2016,
  volume  = 83,
  pages   = {15 - 31},
  doi     = {10.1016/j.robot.2016.06.008}
}

Acknowledgment

As implementation of the fallback exploration strategy based on classical frontier exploration, we apply Paul Bovbel's frontier_exploration package. This package also in part inspired the implementation our planner.

Installation

The code is hosted on GitHub. The package has been tested to work with ROS Indigo, running on Ubuntu 14.04, using gcc 4.8.4 as compiler. To build, simply clone this repository to your catkin workspace src directory, and run catkin_make in the workspace main directory.

For improved performance, this package uses OpenMP for evaluating trajectories in parallel. C++11 features are used in the code, and support is required from the compiler.

Simulator demo: Turtlebot exploring an environment

You can test the exploration planner by running it using simulator. Here, we apply mostly standard settings from the turtlebot_stage package. To run the demo, you need to install the dependencies:

sudo apt-get install ros-indigo-turtlebot-simulator ros-indigo-frontier-exploration ros-indigo-turtlebot-navigation

Before continuing, make sure you have sourced setup.bash of the catkin workspace you installed the exploration package in, do this as follows (changing the path appropriately)

source ~/catkin_ws/devel/setup.bash

Now run the main launch file:

roslaunch ase_exploration simulator_exploration.launch

The simulator will now start, along with other nodes and an rviz visualization.

Finally, start the action client to send an exploration command to the robot. This command must be run in a terminal window where setup.bash of the catkin workspace you installed the exploration package in has been sourced.

rosrun actionlib axclient.py /exploration

Click on "Send", and the simulated Turtlebot will start exploring the environment.

ROS Node details: ase_exploration_planner_node

1. Actions provided

This node provides an implementation of the SimpleActionServer for the ExploreAction type defined in this package. This action is provided with the name exploration. Your best bet to get started is probably to use actionlib's axclient to send an action request to start exploration: rosrun actionlib axclient.py /exploration.

ExploreAction

ExploreAction is very simple. It has an empty goal definition, and an empty result definition, and as feedback will output the current exploration target produced by the planner. Once the user gives the node a exploration task through this action, the planner will produce exploration targets until an error occurs or the user cancels the action.

2. Actions called

The exploration targets produced by the planner are sent as navigation goals to move_base. This is handled by a SimpleActionClient calling an move_base_msgs::MoveBaseAction on the topic move_base.

3. Services required

This node requires and calls two services from the frontier_exploration package. They are:

  • frontier_exploration/UpdateBoundaryPolygon
  • frontier_exploration/GetNextFrontier

In practice you will need to launch an instance of frontier_exploration and set its parameters according to the behaviour you want in case this exploration node has to fallback to using frontier exploration. The ase_exploration_node will call services from frontier_exploration as required.

4. Subscribed topics

The node requires two types of maps as input in order to work: a costmap describing where the robot is allowed to and not allowed to plan paths, and a global map describing the current information the robot has about the environment. For the cost map, we need to subscribe both to the costmap itself and any possible updates to it, as described in the following.

  • costmap - a nav_msgs::OccupancyGrid type of costmap describing where the robot is allowed to plan paths to. All values less than or equal to 98 are interpreted as allowed for planning. For controlling behaviour in unknown areas, see the parameter allow_unknown_targets.
  • costmap_updates - a map_msgs::OccupancyGridUpdates message containing updates to partial areas in the global costmap.
  • map a nav_msgs::OccupancyGrid type of map message containing a global map. This can be produced e.g. by a SLAM algorithm. This map is used at each planning stage as starting information, and should be updated to reflect exploration progress.

5. Published topics

  • planner_paths a nav_msgs::Path type message where all paths the planner has considered on each iteration are published. Note that to visualize these e.g. in rviz, you should set the number of paths displayed equal to the number of particles defined by the parameter num_particles.

6. Parameters

These parameters can be set at node startup. The planner behaviour control parameters set the thresholds for when the planner will think that the robot is stuck or that local trajectories are not informative. In case these thresholds are triggered, the planner will fall back to a frontier exploration for selecting the next target and then resume planning via local trajectories.

Frame ids

  • map_frame_id the map frame in which planning will be done. This must match the incoming "map", "costmap", and "costmap_updates" topics' frame_id. (string, default: map)
  • base_frame_id base frame of the robot. (string, default: base_link)

A TF transform must be available between map_frame_id and base_frame_id.

Planner behaviour control

  • goal_execution_time the maximum amount of time in seconds that a single exploration target will be active. Once the robot reaches the target or this limit is exceeded, it will trigger a new planning phase. (double, default: 10.0)
  • min_traj_length minimum length of trajectories in meters for the planner to consider them valid (double, default: 0.2)
  • min_reward minimum amount of reward units obtained for trajectories for the planner to consider them valid. Roughly speaking, this value corresponds to the the required expected number of unknown cells in the map that will be observed as either free or occupied if the robot were to traverse the trajectory. (double, default: 30.0)
  • max_sampling_tries maximum number of samples to try to draw for each trajectory before giving up and declaring that no valid trajectory could be found. (int, default: 30)
  • frontier_distance_threshold if the exploration target was obtained via frontier exploration, the minimum distance in meters when the robot is considered to have reached this target and planning via local trajectories is resumed. (double, default: 2.0)
  • wait_between_planner_iterations controls whether to wait for user input (keypress) between iterations of the planning algorithm. Useful for debugging and inspecting the evolution of the trajectories considered by the planner during each iteration. (bool, default: False)

Robot dynamics model limits

Only trajectories respecting these limits will be sampled by the planner.

  • lin_v_min absolute minimum linear velocity for the robot in meters per second (double, default: 0.3)
  • lin_v_max absolute maximum linear velocity for the robot in meters per second (double, default: 1.0)
  • ang_v_min absolute minimum rotational velocity for the robot in radians per second (double, default: -1.0)
  • ang_v_max absolute maximum rotational velocity for the robot in radians per second (double, default: 1.0)
  • f_rot_min minimum final rotation at the end of the trajectory of the robot in radians (double, default: -0.02)
  • f_rot_max maximum final rotation at the end of the trajectory of the robot in radians (double, default: 0.02)

7. Parameters (dynamically reconfigurable)

From the following parameters, the most important ones to set to correspond to your system are those controlling the simulated laser range finder. The parameters listed below can also be reconfigured dynamically during runtime using dynamic_reconfigure.

Planning algorithm settings

  • horizon determines how many control actions each trajectory will be composed of. (int, default: 3)
  • discount determines the relative value of immediate and later rewards, should be greater than 0.0. The smaller this value is, the more emphasis is on immediate information gain. Value 1.0 corresponds to no preference between immediate and later information gain. (double, default: 1.0)
  • schedule_a at iteration i, the planner will use k = a*i + b samples to evaluate each trajectory. This sets the parameter a. (int, default: 4)
  • schedule_b at iteration i, the planner will use k = a*i + b samples to evaluate each trajectory. This sets the parameter b. (int, default: 3)
  • num_kernels specifies the total number of iterations the planner will run for. At the first iteration, trajectories are sampled from a uniform distribution, and at later iterations from Gaussian kernels centred at the previous evaluated trajectories. (int, default: 5)
  • std_vel (double, default: 0.2), std_ang (double, default: 0.1), std_fr (double, default: 0.02). These parameters control the trajectory sampling process by defining the standard deviations of the Gaussian kernels for the linear velocity (std_vel), angular velocity (std_ang) and a final rotation at the end of the trajectory (std_fr). Velocity is measured in meters per second, angles in radians. At each iteration, the Gaussian kernel used to modify each trajectory samples from three independent Gaussian distributions. The standard deviations for these kernels decrease as function of the iteration. At iteration i, the standard deviation applied will be std_vel / (i+1), and so on. This is necessary so the planner does not "lose" good trajectories by modifying them too much at later iterations.
  • num_particles the number of trajectories maintained over the set of iterations. The larger the number, the more likely it is to converge to a good trajectory. Increasing this parameter will also increase the computational demands the most. (int, default: 10)
  • resample_thresh the threshold (between 0.0 and 1.0) for the effective number of particles below which resampling will be triggered. (double, default: 0.33)

Planning settings and constraints

  • allow_unknown_targets controls whether the planner is allowed to produce exploration targets that are not in free space. Setting this false will make exploration more conservative, as only areas known to be free will be set as exploration goals. (bool, default: True)
  • default_ctrl_duration the duration of each control action in seconds. Multiplied by horizon, this determines the duration of the trajectories considered by the planner. (double, default: 1.0)

Simulated laser scanner parameters

The node samples observations via raytracing with a simulated laser range finder assuming a map hypothesis consistent with the current costmaps. These observation samples are applied to evaluate the trajectories. The simulated laser parameters can be controlled through these parameters.

  • laser_min_angle_deg the smallest incidence angle of the laser beam in degrees. (double, default: -90)
  • laser_max_angle_deg the largest incidence angle of the laser beam in degrees. (double, default: 90)
  • laser_angle_step_deg the step in degrees between each laser ray. For example, using the default parameters will produce a ray in incidence angles -90, -85, ..., 85, 90. (double, default: 5.0)
  • laser_max_dist_m the maximum measurable distance for the laser range finder in meters. (double, default: 4.0)
  • laser_p_false_pos probability of false positive reading for the laser (free cell observed as occupied) (double, default: 0.05)
  • laser_p_false_neg probability of false negative reading for the laser (occupied cell observed as free)(double, default: 0.05)

8. Tips on improving computational performance

The planning method is computationally intensive. To improve computation speed, you can primarily try to to decrease the length of trajectories by lowering horizon, decreasing the number of particles num_particles, or the number of samples used in evaluation via schedule_a and schedule_b, or by decreasing the resolution of the simulated laser by lowering the maximum range laser_max_dist_m or making the resolution laser_angle_step larger.

9. Limitations

The software has been written assuming a robot in a planar environment, specifically a Turtlebot-like robot platform. Possible robot trajectories are sampled under this assumption. If your robot is not even barely correspond to these assumptions, the dynamics model should be replaced by one suitable for your robot.

The software currently works on 2D occupancy grid maps and costmaps. Although there are no plans to extend the software beyond this I have attempted to write the code to enable extensions.

About

Planning for robotic exploration based on forward simulation

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published