Local Purple Air Integration

This is an integration for home assistant that works integrates with local polling on your PurpleAir devices on your local network.

Code adapted from https://github.com/johnboiles/home-assistant-purpleair

It creates one device per Purple Air device registered and several sensors for each several readings.

Still very much a work in progress

Installation

Simply copy the /purpleair directory in to your config's custom_components directory (you may need to create it), restart Home Assistant, and add the integration via the UI (it's simple!).

To register a new purple air device:

1. Add "Purple Air" Integration.
2. Enter the IP address of your local purple air device
3. Give it a name.

Current Sensors

This will create 10 entities per device:

• Particulate Matter 0.1
• Particulate Matter 2.5
• Particulate Matter 10
• Air Quality Index (EPA)
• Air Quality Index (LRAPA)
• Humidity
• Temperature
• Dewpoint
• Pressure
• RSSI

Sensor data on PurpleAir is updated every 60 seconds.

This component is licensed under the MIT license, so feel free to copy, enhance, and redistribute as you see fit.

Releases

2.0.1

Replace public purple air device support (via purpleair.com) and replace with purpleair devices that are on your local network only.

1.1.0

Adds support for private hidden sensors and indoor sensors. Fixes #3 and #4.

1.0.0

Initial release (after versioning)