A GitHub App/Action that automates the creation of issue branches (either automatically after assigning an issue or after commenting on an issue with a ChatOps command: /create-issue-branch or /cib).

Built in response to this feature request issue: isaacs/github#1125

• Installation
• Usage
• Configuration
• Feedback, suggestions and bug reports
• Contributing
• License

There are two options to run this app as part of your development workflow:

1. Install it as an app for your organization/account/repository
2. Run it as an action in your GitHub action YAML configuration

Option 1 is easiest if you're developing on GitHub.com, option 2 gives you full control how and when the app runs in your development workflow.

You can install the app for your organization/account/repository from this page

Add this to your workflow YAML configuration:

on:
    issues:
        types: [assigned]
    issue_comment:
        types: [created]
    pull_request:
        types: [closed]

jobs:
    create_issue_branch_job:
        runs-on: ubuntu-latest
        steps:
        - name: Create Issue Branch
          uses: robvanderleek/create-issue-branch@master
          env:
            GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

The GitHub Action has one output variable: branchName, which contains the name of the branch that was created. You can use this output in downstream actions. For a trivial example see this workflow.

This app can support your development workflow in two ways (modes): auto and chatops.

In "auto" mode the typical development workflow is:

1. An issue is created, for example: Issue 15: Fix nasty bug!

some time may pass

2. The issue is assigned
3. When the issue is assigned this app will create a new issue branch (for the example issue this branch will be called issue-15-Fix_nasty_bug)

In "chatops" mode the typical development workflow is:

1. An issue is created, for example: Issue 15: Fix nasty bug!

some time may pass

2. A developer that wants to work on this issue gives the ChatOps command /cib as a comment on the issue
3. This app will create a new issue branch (for the example issue this branch will be called issue-15-Fix_nasty_bug) By default the app notifies creation is completed with a comment on the issue.

GitHub Apps & Actions allow you to define custom and advanced automated workflows. Examples of Apps & Actions that can be used alongside this app to compose tailored issue workflows are:

• project-bot: App for project automation
• github-actions-automate-projects: Action for project automation
• auto-card-labeler: Automatically label issues/PRs

To get inspired of what is possible with Actions workflows, see this configuration.

Remember to always pick the simplest issue workflow that fits your poject.

This app does not require a configuration. However, if you want to override the default behaviour you can do so by placing a YAML file in your repository at the location: .github/issue-branch.yml with the overrides.

If the app has a problem with your configuration YAML (e.g.: invalid content) it will create an issue with the title "Error in Create Issue Branch app configuration" in the repo. Subsequent runs with an invalid configuration will not create new issues, only one stays open.

Organization/user wide configuration prevents a configuration in every individual repo and is supported by putting the YAML file .github/issue-branch.yml in a repository called .github. So, if your organization/username is acme, the full path becomes: https://github.com/acme/.github/blob/master/.github/issue-branch.yml.

The default mode is "auto", meaning a new issue branch is created after an issue is assigned.

You can change the mode to "chatops", meaning a new issue branch is created after commenting on an issue with /create-issue-branch or /cib, by putting the following line in your issue-branch.yml:

mode: chatops

By default the app comments on the issue after creating a branch.

You can change this default behaviour, and make the app silent, by putting the following line in your issue-branch.yml:

silent: true

Branch names are generated from the issue, there are 3 built-in flavours or it can be customized.

The 3 built-in flavours are:

1. tiny => an i followed by the issue number, for example: i15
2. short => the word issue followed by the issue number, for example: issue-15
3. full => the word issue followed by the issue number followed by the issue title, for example: issue-15-Fix_nasty_bug

The default is full, other types can be configured in the YAML like this:

branchName: tiny

or

branchName: short

To customize branch names you can give branchName a string value where ${...} placeholders are substituted with fields from the GitHub issue assignment JSON object.

For example, if you would like to have your branch names contain only the issue number and title (similar to the GitLab branch naming convention), confgure it like this:

branchName: '${issue.number}-${issue.title}'

See test/fixtures/issues.assigned.json for all possible placeholder names.

Characters that are not allowed in Git branch names are replaced by default with an underscore (_) character. You can configure a different replacement character as follows:

gitSafeReplacementChar: '-'

The above configuration would generate the following branch name for issue 15 that has the title "Fix nasty bug": issue-15-Fix-nasty-bug.

Substitutions for ${...} placeholders can be lowercased by putting a , before the closing curly. Likewise, substitutions can be uppercased by putting a ^ before the closing curly.

For example, issue titles can be lowercased in branch names like this:

branchName: '${issue.number}-${issue.title,}'

or if you want the complete title in uppercase:

branchName: '${issue.number}-${issue.title^}'

This app can close issues automatically for you when a pull request for an issue branch is merged. You can enable this feature with:

autoCloseIssue: true

Be aware that the app needs to be able to find the issue number in the branch name, otherwise this feature will not work. This feature only works if one of the following is true for your app configuration:

• You use the default branchName setting
• Your branchName setting is tiny, short or full
• Your branch name starts with the issue number
• Your branch name contains the string issue- (case insensitive) followed by the issue number, for example: Project-A-Issue-123-Rewrite_in_Clojure

You can override the source branch (by default the "default branch" of the repository is used) based on the issue label.

For example, if you want branches for issues with the enhancement label to have the dev branch as a source, and branches for issues with the bug label to have the staging branch as a source, add this to your configuration YAML:

branches:
  - label: enhancement
    name: dev
  - label: bug
    name: staging

The label field also takes a list of label names. In that case all labels in the list must be matched by labels of the issue. For example:

branches:
  - label: 
    - enhancement
    - docs
    name: docs
  - label: enhancement
    name: dev

In the configuration above issues with the labels enhancement and docs will have the docs branch as a source, while issues with an enhancement label but not a docs label will have the dev branch as a source.

When issues have multiple labels the branch of the first match (based on the order in the configuration YAML will be used).

If a configured branch does not exist in the repository the "default branch" is used.

Branch names can be prefixed based on the label of an issue.

For example, if you want branches for issues with the enhancement label to have the feature/ prefix and branches for issues with the bug label to have the bugfix/ prefix, add this to your configuration YAML:

branches:
  - label: enhancement
    prefix: feature/
  - label: bug
    prefix: bugfix/

You can use ${...} placeholders in the prefix to substitute fields from the GitHub issue assignment JSON object. For example, if you want the GitHub login name of the user that created the issue in the branch prefix, add this to your configuration YAML:

branches:
  - label: enhancement
    prefix: feature/${issue.user.login}/

See test/fixtures/issues.assigned.json for all possible placeholder names.

In mode "auto" branch creation can be skipped based on the label of an issue.

For example, if you don't want to automatically create branches for issues with the question label, add this to your configuration YAML:

branches:
  - label: question
    skip: true

Wildcard characters '?' (matches any single character) and '*' (matches any sequence of characters, including the empty sequence) can be used in the label field.

For example, to set the default/fallback prefix issues/ for issues that do not have the enhancement or bug label, use this configuration:

branches:
  - label: enhancement
    prefix: feature/
  - label: bug
    prefix: bugfix/
  - label: '*'
    prefix: issues/

Remember to put quotes around a single asterisk ('*') in YAML

The features below are experimental and may be removed some day or promoted to standard features.

As discussed in this issue determines the branch name on the /cib ChatOps command argument, e.g.: /cib Simple NPE fix will create a branch names issue-1-Simple_NPE_fix`

experimental:
  branchNameArgument: true

Please create an issue here: https://github.com/robvanderleek/create-issue-branch/issues

The list below contains features that might or might not be implemented in the future. Comment or +1 if this feature is useful for your use-case.

• Add Projects integration (see issue #142)
• Automatically open a PR (see issue #80)
• Add issue label management functionality (see issue #177)
• Choose branch to branch from in ChatOps mode (see issues #155 and #213)

If you have suggestions for how create-issue-branch could be improved, or want to report a bug, open an issue! We'd love all and any contributions.

For more, check out the Contributing Guide.

ISC © 2019 Rob van der Leek [email protected] (https://twitter.com/robvanderleek)