ANTARI rp2040 is a 3x4 macropad with rotary encoders and BLE support.
Designer and maintainer: sandipratama/nendezkombet
- Easy to source components.
- Easy to build.
- MX style switch and Kailh low profile V2 switch compatible
- Seeed Studio XIAO RP2040/nRF52840 as main MCU.
- QMK powered.
- RGB support .
- Rotary encoder support.
- Completely open-source.
| Parts | Footprint | Quantity |
|---|---|---|
| Sk6812 mini RGB LED | 5050 | 12 |
| MX switch | 3 or 5 pin | 12 |
| Hotswap socket | kailh or similiar | 12 |
| 1N4148 diode | SOD-123 or axial | 12 |
| Rotary encoder | EC11 | 1 |
| Seeed Studio XIAO | RP2040/nRF52840 | 1 |
| 220ohm resistor | 0805 or axial | 1 |
| Micro slide switch (optional) | MSS22D18 | 1 |
| 3.7v battery (optional) | 3mm thick | 1 |
| 6mm M2 "FEMALE TO FEMALE" brass standoff | round | 4 |
| 5mm M2 screw | round | 8 |
Stacked acrylic case cutting file can be open with Adobe Illustrator or Corel Draw and ready for cutting process.
See inside cutting file folder !!!
The firmware is fully QMK, see build environment setup then the make instructions for more information.
Drag and drop .uf2 file to pop-up folder after enter bootloader
Press the reset button twice on the MCU