Save prepared statements to be able to use them with connetion pooling #281
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Most significant changes are: - `xlog.c` refactoring - some code was moved to `xlogreader.c` and `xlogprefetcher.c`. - `ThisTimeLineID` refactoring (4a92a1c and e997a0c), which affects walproposer code - `XLogFileInit` refactoring, Multiple commits changed the function signature. - resolve initdb and pg_waldump neon-specific options that conflictes with the ones from PostgreSQL. -
…t, which is used for safekeepers-sync
* Move backpressure throttling implementation to neon extension and function for monitoring throttling time * Update src/include/miscadmin.h Co-authored-by: Heikki Linnakangas <[email protected]> Co-authored-by: Heikki Linnakangas <[email protected]>
Disabled by default. The plan is to merge this now, so that we can do performance testing quickly, and if it helps, rewrite and review it properly. Author: Konstantin Knizhnik
Co-authored-by: Konstantin Knizhnik <[email protected]>
Commit a703269 replaced $(INSTALL) with plain "cp" for installing the server header files. It sped up "make install" significantly, because the old logic called $(INSTALL) separately for every header file, whereas plain "cp" could copy all the files in one command. However, we have long since made it a requirement that $(INSTALL) can also install multiple files in one command, see commit f1c5247. Switch back to $(INSTALL). Discussion: https://www.postgresql.org/message-id/200503252305.j2PN52m23610%40candle.pha.pa.us Discussion: https://www.postgresql.org/message-id/2415283.1641852217%40sss.pgh.pa.us
…alue of enable_seqscan_prefetch
to support only extensions that were built against Neon PostgreSQL
Neon generates PG_VERSION files in one format - just major version number without newline. Be consistent with it
No need to perform WAL recovery in Neon Co-authored-by: Konstantin Knizhnik <[email protected]>
…ion because spec_token is not wal logged (#223) * Pin pages with speculative insert tuples to prevent their reconstruction because spec_token is not wal logged refer ##2587 * Update src/backend/access/heap/heapam.c Co-authored-by: Heikki Linnakangas <[email protected]> Co-authored-by: Heikki Linnakangas <[email protected]>
* Fix shared memory initialization for last written LSN cache Replace (from,till) with (from,n_blocks) for SetLastWrittenLSNForBlockRange function * Fast exit from SetLastWrittenLSNForBlockRange for n_blocks == 0
Without this patch, on bootstrap XLP_FIRST_IS_CONTRECORD has been always put on
header of a page where WAL writing continues. This confuses WAL decoding on
safekeepers, making it think decoding starts in the middle of a record, leading
to
2022-08-12T17:48:13.816665Z ERROR {tid=37}: query handler for 'START_WAL_PUSH postgresql://no_user:@localhost:15050' failed: failed to run ReceiveWalConn
Caused by:
0: failed to process ProposerAcceptorMessage
1: invalid xlog page header: unexpected XLP_FIRST_IS_CONTRECORD at 0/2CF8000
Rebase of a1af529 for v14.
- Refactor the way the WalProposerMain function is called when started with --sync-safekeepers. The postgres binary now explicitly loads the 'neon.so' library and calls the WalProposerMain in it. This is simpler than the global function callback "hook" we previously used. - Move the WAL redo process code to a new library, neon_walredo.so, and use the same mechanism as for --sync-safekeepers to call the WalRedoMain function, when launched with --walredo argument. - Also move the seccomp code to neon_walredo.so library. I kept the configure check in the postgres side for now, though.
Fix indentation, remove unused definitions, resolve some FIXMEs.
Previously, we called PrefetchBuffer [NBlkScanned * seqscan_prefetch_buffers] times in each of those situations, but now only NBlkScanned. In addition, the prefetch mechanism for the vacuum scans is now based on blocks instead of tuples - improving the efficiency.
Parallel seqscans didn't take their parallelism into account when determining which block to prefetch, and vacuum's cleanup scan didn't correctly determine which blocks would need to be prefetched, and could get into an infinite loop.
* Use prefetch in pg_prewarm extension * Change prefetch order as suggested in review
* Update prefetch mechanisms: - **Enable enable_seqscan_prefetch by default** - Store prefetch distance in the relevant scan structs - Slow start sequential scan, to accommodate LIMIT clauses. - Replace seqscan_prefetch_buffer with the relations' tablespaces' *_io_concurrency; and drop seqscan_prefetch_buffer as a result. - Clarify enable_seqscan_prefetch GUC description - Fix prefetch in pg_prewarm - Add prefetching to autoprewarm worker - Fix an issue where we'd incorrectly not prefetch data when hitting a table wraparound. The same issue also resulted in assertion failures in debug builds. - Fix parallel scan prefetching - we didn't take into account that parallel scans have scan synchronization, too.
#245) * Maintain last written LSN for each page to enable prefetch on vacuum, delete and other massive update operations * Move PageSetLSN in heap_xlog_visible before MarkBufferDirty
- Prefetch the pages in index vacuum's sequential scans Implemented in NBTREE, GIST and SP-GIST. BRIN does not have a 2nd phase of vacuum, and both GIN and HASH clean up their indexes in a non-seqscan fashion: GIN scans the btree from left to right, and HASH only scans the initial buckets sequentially.
* Show prefetch statistic in EXPLAIN refer #2994 * Update heap pge LSN in case of VM changes even if wal_redo_hints=off refer #2807 * Undo occasional changes * Undo occasional changes
* Show prefetch statistic in EXPLAIN refer #2994 * Collect per-node prefetch statistics * Show number of prefetch duplicates in explain
* Implement efficient prefetch for parallel bitmap heap scan * Change MAX_IO_CONCURRENCY to be power of 2
* Avoid errors when accessing indexes of unlogge tables after compute restart * Support unlogged sequences * Extract sequence start value from pg_sequence * Initialize unlogged index undex eclusive lock
They will be handled in pageserver, ref neondatabase/neon#3706 This reverts commit ad5e789 This reverts commit 46c44e8 This does *not* revert commit 285cd13. We likely should do that, but check_restored_datadir_content complains in some diff in init fork contents after test_pg_regress, this should be sorted out.
written LSN cache optional.
Now similar kind of hack (using malloc() instead of shmem) is done in the wal-redo extension.
* Adjust prefetch target for parallel bitmap scan * More fixes for parallel bitmap scan prefetch
* Pefeth for index and inex-only scans * Remove debug logging * Move prefetch_blocks array to the end of BTScanOpaqueData struct
* Recovery requirements: Add condition variable for WAL recovery; allowing backends to wait for recovery up to some record pointer. * Fix issues w.r.t. WAL when LwLsn is initiated and when recovery starts. This fixes some test failures that showed up after updating Neon code to do more precise handling of replica's get_page_at_lsn's request_lsn lsns. --------- Co-authored-by: Matthias van de Meent <[email protected]>
MMeent
force-pushed
the
REL_15_STABLE_neon
branch
from
2df2ce3 to
1984832
Compare
tristan957
force-pushed
the
REL_15_STABLE_neon
branch
from
553f2d3 to
026d6b0
Compare
tristan957
force-pushed
the
REL_15_STABLE_neon
branch
from
bc88f53 to
24333ab
Compare
tristan957
force-pushed
the
REL_15_STABLE_neon
branch
from
81e16cd to
6ee78a3
Compare
tristan957
force-pushed
the
REL_15_STABLE_neon
branch
2 times, most recently
from
3be8940 to
e2dbd63
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.