Fix(l10n): Update translations from Transifex

Signed-off-by: Nextcloud bot <[email protected]>

l10n/ar.js

@@ -89,7 +89,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "تم تحميل Libtensorflow إلى Node.js بنجاح.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "تعذر تحميل Tensorflow WASM في Node.js. يوجد خطأ فى التنصيب. ",
     "Tensorflow WASM was loaded successfully into Node.js." : "تم تحميل Tensorflow WASM في Node.js بنجاح.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "إذا كان الملف الثنائي Node.js المشحون مع النظام لا يعمل على نظامك لسبب ما، يمكنك تعيين المسار إلى ملف node.js ثنائي مخصص. يتم دعم Node v14.17 والإصدارات الأحدث v14.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "بالنسبة لمستخدمي Snap لنكست كلاود، تحتاج إلى ضبط هذا المسار للإشارة إلى الدليل \"الحالي\" الخاص بـ Snap حيث سيتغير المسار الذي تم تكوينه مسبقًا مع كل تحديث. على سبيل المثال، اضبطه على \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" بدلاً من \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"",
     "Classifier process priority" : "أولوية عمليات المُصنِّف classifier",
     "Checking Nice binary" : "التحقُّق من الملف الثنائي لتطبيق تبادل الصور Nice ",

l10n/ar.json

@@ -87,7 +87,6 @@
     "Libtensorflow was loaded successfully into Node.js." : "تم تحميل Libtensorflow إلى Node.js بنجاح.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "تعذر تحميل Tensorflow WASM في Node.js. يوجد خطأ فى التنصيب. ",
     "Tensorflow WASM was loaded successfully into Node.js." : "تم تحميل Tensorflow WASM في Node.js بنجاح.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "إذا كان الملف الثنائي Node.js المشحون مع النظام لا يعمل على نظامك لسبب ما، يمكنك تعيين المسار إلى ملف node.js ثنائي مخصص. يتم دعم Node v14.17 والإصدارات الأحدث v14.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "بالنسبة لمستخدمي Snap لنكست كلاود، تحتاج إلى ضبط هذا المسار للإشارة إلى الدليل \"الحالي\" الخاص بـ Snap حيث سيتغير المسار الذي تم تكوينه مسبقًا مع كل تحديث. على سبيل المثال، اضبطه على \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" بدلاً من \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"",
     "Classifier process priority" : "أولوية عمليات المُصنِّف classifier",
     "Checking Nice binary" : "التحقُّق من الملف الثنائي لتطبيق تبادل الصور Nice ",

l10n/bg.js

@@ -65,7 +65,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "libtensorflow беше успешно зареден в Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Неуспешно зареждане на Tensorflow WASM в Node.js. Нещо не е наред с настройката ви.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM беше успешно зареден в Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Ако доставеният двоичен файл на Node.js, поради някаква причина не работи на вашата система, може да зададете пътя към персонализиран двоичен файл на node.js. В момента се поддържат Node v14.17 и по-нови версии v14.",
     "Terminal commands" : "Терминални команди",
     "To download all models preliminary to executing the classification jobs, run the following command on the server terminal." : "За изтегляне на всички модели преди изпълнението на задачите за класификация, пуснете следната команда на сървърния терминал.",
     "To trigger a full classification run, run the following command on the server terminal. (The classification will run in multiple background jobs which can run in parallel.)" : "За задействане на пълна класификация, изпълнете следната команда на терминала на сървъра. (Класификацията ще се изпълни в няколко фонови задачи, които могат да се изпълняват паралелно.)",

l10n/bg.json

@@ -63,7 +63,6 @@
     "Libtensorflow was loaded successfully into Node.js." : "libtensorflow беше успешно зареден в Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Неуспешно зареждане на Tensorflow WASM в Node.js. Нещо не е наред с настройката ви.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM беше успешно зареден в Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Ако доставеният двоичен файл на Node.js, поради някаква причина не работи на вашата система, може да зададете пътя към персонализиран двоичен файл на node.js. В момента се поддържат Node v14.17 и по-нови версии v14.",
     "Terminal commands" : "Терминални команди",
     "To download all models preliminary to executing the classification jobs, run the following command on the server terminal." : "За изтегляне на всички модели преди изпълнението на задачите за класификация, пуснете следната команда на сървърния терминал.",
     "To trigger a full classification run, run the following command on the server terminal. (The classification will run in multiple background jobs which can run in parallel.)" : "За задействане на пълна класификация, изпълнете следната команда на терминала на сървъра. (Класификацията ще се изпълни в няколко фонови задачи, които могат да се изпълняват паралелно.)",

l10n/ca.js

@@ -61,7 +61,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow s'ha carregat correctament a Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "No s'ha pogut carregar Tensorflow WASM a Node.js. Alguna cosa no funciona amb la vostra configuració.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM s'ha carregat correctament a Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Si el binari Node.js enviat no funciona al vostre sistema per algun motiu, podeu establir el camí a un binari node.js personalitzat. Actualment s'admet Node v14.17 i versions més recents v14.",
     "Terminal commands" : "Mostra les ordres del terminal",
     "To download all models preliminary to executing the classification jobs, run the following command on the server terminal." : "Per baixar tots els models previs a l'execució dels treballs de classificació, executeu l'ordre següent al terminal del servidor.",
     "You can reset the tags of all files that have been previously classified by Recognize with the following command:" : "Podeu restablir les etiquetes de tots els fitxers que s'han classificat prèviament per Recognize amb l'ordre següent:",

l10n/ca.json

@@ -59,7 +59,6 @@
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow s'ha carregat correctament a Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "No s'ha pogut carregar Tensorflow WASM a Node.js. Alguna cosa no funciona amb la vostra configuració.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM s'ha carregat correctament a Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Si el binari Node.js enviat no funciona al vostre sistema per algun motiu, podeu establir el camí a un binari node.js personalitzat. Actualment s'admet Node v14.17 i versions més recents v14.",
     "Terminal commands" : "Mostra les ordres del terminal",
     "To download all models preliminary to executing the classification jobs, run the following command on the server terminal." : "Per baixar tots els models previs a l'execució dels treballs de classificació, executeu l'ordre següent al terminal del servidor.",
     "You can reset the tags of all files that have been previously classified by Recognize with the following command:" : "Podeu restablir les etiquetes de tots els fitxers que s'han classificat prèviament per Recognize amb l'ordre següent:",

l10n/cs.js

@@ -88,7 +88,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow bylo úspěšně nahráno do Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Nepodařilo se načíst Tensorflow WASM do Node.js. S vaší instalací něco není v pořádku.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensoflow WASM bylo úspěšně načteno do Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Pokud dodávaný spustitelný soubor Node.js z nějakého důvodu na vámi využívaném systému nefunguje, je možné nasměrovat na uživatelsky určený spustitelný soubor node.js. V tuto chvíli je podporováno Node v14.17 a novější v řadě 14.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "Uživatelé Nextcloud Snap budou potřebovat upravit tento popis umístění aby ukazovatl na „current“ adresář snapu, protože přednastavený popis se změní při každé aktualizaci. Například nastavte na „/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node“ namísto „/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node“",
     "Classifier process priority" : "Priorita procesu rozřazování",
     "Checking Nice binary" : "Kontrola spustitelného souboru s nástrojem nice",

l10n/cs.json

@@ -86,7 +86,6 @@
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow bylo úspěšně nahráno do Node.js.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Nepodařilo se načíst Tensorflow WASM do Node.js. S vaší instalací něco není v pořádku.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensoflow WASM bylo úspěšně načteno do Node.js.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Pokud dodávaný spustitelný soubor Node.js z nějakého důvodu na vámi využívaném systému nefunguje, je možné nasměrovat na uživatelsky určený spustitelný soubor node.js. V tuto chvíli je podporováno Node v14.17 a novější v řadě 14.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "Uživatelé Nextcloud Snap budou potřebovat upravit tento popis umístění aby ukazovatl na „current“ adresář snapu, protože přednastavený popis se změní při každé aktualizaci. Například nastavte na „/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node“ namísto „/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node“",
     "Classifier process priority" : "Priorita procesu rozřazování",
     "Checking Nice binary" : "Kontrola spustitelného souboru s nástrojem nice",

l10n/de.js

@@ -89,7 +89,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow wurde erfolgreich in Node.js geladen.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Tensorflow WASM konnte nicht in Node.js geladen werden. Irgendetwas stimmt mit deinem Setup nicht.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM wurde erfolgreich in Node.js geladen.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Wenn die mitgelieferte Node.js-Binärdatei aus irgendeinem Grund auf deinem System nicht funktioniert, kannst du den Pfad zu einer benutzerdefinierte node.js-Binärdatei festlegen. Derzeit werden Node v14.17 und neuere v14-Releases unterstützt.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "Für Nextcloud Snap-Benutzer musst du diesen Pfad so anpassen, dass er auf das „aktuelle“ Verzeichnis des Snaps verweist, da sich der vorkonfigurierte Pfad mit jedem Update ändert. Stelle es beispielsweise auf „/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node“ anstelle von „/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node“ ein.",
     "Classifier process priority" : "Priorität des Klassifikationsprozesses",
     "Checking Nice binary" : "Überprüfung der Nice-Binärdatei",

l10n/de.json

@@ -87,7 +87,6 @@
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow wurde erfolgreich in Node.js geladen.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Tensorflow WASM konnte nicht in Node.js geladen werden. Irgendetwas stimmt mit deinem Setup nicht.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM wurde erfolgreich in Node.js geladen.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Wenn die mitgelieferte Node.js-Binärdatei aus irgendeinem Grund auf deinem System nicht funktioniert, kannst du den Pfad zu einer benutzerdefinierte node.js-Binärdatei festlegen. Derzeit werden Node v14.17 und neuere v14-Releases unterstützt.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "Für Nextcloud Snap-Benutzer musst du diesen Pfad so anpassen, dass er auf das „aktuelle“ Verzeichnis des Snaps verweist, da sich der vorkonfigurierte Pfad mit jedem Update ändert. Stelle es beispielsweise auf „/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node“ anstelle von „/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node“ ein.",
     "Classifier process priority" : "Priorität des Klassifikationsprozesses",
     "Checking Nice binary" : "Überprüfung der Nice-Binärdatei",

l10n/de_DE.js

@@ -89,7 +89,6 @@ OC.L10N.register(
     "Libtensorflow was loaded successfully into Node.js." : "Libtensorflow wurde erfolgreich in Node.js geladen.",
     "Could not load Tensorflow WASM in Node.js. Something is wrong with your setup." : "Tensorflow WASM konnte nicht in Node.js geladen werden. Irgendetwas stimmt mit den Einstellungen nicht.",
     "Tensorflow WASM was loaded successfully into Node.js." : "Tensorflow WASM wurde erfolgreich in Node.js geladen.",
-    "If the shipped Node.js binary doesn't work on your system for some reason you can set the path to a custom node.js binary. Currently supported is Node v14.17 and newer v14 releases." : "Wenn die mitgelieferte Node.js-Binärdatei aus irgendeinem Grund auf Ihrem System nicht funktioniert, können Sie den Pfad zu einer benutzerdefinierten node.js-Binärdatei festlegen. Derzeit werden Node v14.17 und neuere v14-Releases unterstützt.",
     "For Nextcloud Snap users, you need to adjust this path to point to the snap's \"current\" directory as the pre-configured path will change with each update. For example, set it to \"/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node\" instead of \"/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node\"" : "Für Nextcloud Snap-Benutzer müssen Sie diesen Pfad so anpassen, dass er auf das „aktuelle“ Verzeichnis des Snaps verweist, da sich der vorkonfigurierte Pfad mit jedem Update ändert. Stellen Sie es beispielsweise auf „/var/snap/nextcloud/current/nextcloud/extra-apps/recognize/bin/node“ anstelle von „/var/snap/nextcloud/9337974/nextcloud/extra-apps/recognize/bin/node“ ein.",
     "Classifier process priority" : "Priorität des Klassifikationsprozesses",
     "Checking Nice binary" : "Überprüfung der Nice-Binärdatei",