TM-V71 and TM-D710(G) Kenwood - PC RIG control commands

Reverse engineered RIG control commands for the Kenwood TM-V71 and TM-D710(G).

Thanks to: LA8OKA, W6GPS, WM8S and N1LKS for helping.

Based on rev.11 02 april 2009

Contributing

Please report any errors or new information to the issue tracker.

Additional information

• TM-D710/TM-V71 mailing list and (https://kenwood-radios.groups.io/g/TM-D710-and-TM-V71)

Available control commands for the display unit

(Firmware V1.04 TM-D710Gx, Firmware V2.15 TM-D710x)

These commands work with the display unit on the TM-D710 (and the TM-V71 when using the RC-D710 accessory).

• AE Display serial number (This will display gibberish)
• BE Enable/disable BCON - TMD710G (When APRS is enabled)
• BL Backlight status
• CS Callsign
• GP Internal GPS - TM-D710G
• GT Internal GPS Returns N if internal GPS is not on
• ID Radio Model
• RT Time
• SR Reset
• TC TNC control mode
• TN TNC status
• TS TNC control mode 2
• TY Display Type
• 0M PROGRAM Enters MCP programming mode

Available control commands for the main unit

(Firmware V1.04 TM-D710Gx, Firmware V2.12 TM-D710x)

• AE Radio serial number
• AS Reverse
• BC PTT and CTRL Band
• BT Burst tone
• BY Squelch open/closed
• CC Call channel
• CD Toggle between memory name and channel number
• DL Dual Band Mode/Single Band Mode
• DM DTMF memory
• DT DTMF
• DW Emulates the Microphone Down Key
• FO VFO channel
• FV Firmware version
• ID Radio Model
• LK Lock
• ME Memory channel, frequency, offset etc
• MN Memory name
• MR Memory channel
• MS Power on message
• MU Menu
• PC Output power
• PV Programmable VFO
• RX Receive
• SQ Squelch status
• SR Reset
• SS S-meter squelch
• TT Transmit tone
• TX Transmit
• TY Radio Type
• UP Emulates the Microphone Up Key
• VM Memory/VFO
• 0M PROGRAM Enters MCP programming mode
• 0G KENWOOD Enters service mode