📝 [#4785] Update the eHerkenning documentation

Updated the outdated sections and added the extra steps/configuration
options now that it is possible to configure things in the admin.

It's mostly the same from the DigiD configuration.

docs/configuration/authentication/eherkenning_eidas.rst

@@ -18,7 +18,32 @@ that describes the authenticated entity (person or company).
 
 .. note::
 
-    Open Forms currently only supports the same security level for all forms.
+    Authentication via eIDAS uses the same supplier and generated files as
+    eHerkenning. If you plan on adding eIDAS support to Open Forms, it's best
+    to do these 2 at the same time.
+
+Limitations
+===========
+
+Some limitations apply.
+
+**KVKNr identifier required**
+
+Open Forms only supports the ``KVKNr`` identifier. Other identification numbers exist,
+but we don't support these (yet). Ensure that your supplier specifies the relevant
+identifying attribute, since this can not be specified in Open Forms.
+
+Additional identifying attributes may be specified - these will be ignored.
+
+**Security level**
+
+Open Forms currently only supports the same security level for all forms. You can not
+override this, and the security level is recorded in the service catalog so it is
+outside of our control. We're aware of this feature request though.
+
+.. note::
+
+    The available security levels are:
 
     =========== =============== ===========================================
     eHerkenning eIDAS           SAML2 AuthnContextClassRef element
@@ -31,16 +56,12 @@ that describes the authenticated entity (person or company).
 
     Source: `Afsprakenstelsel eToegang <https://afsprakenstelsel.etoegang.nl/Startpagina/AS1.24b/level-of-assurance>`_
 
-.. note::
-
-    Authentication via eIDAS uses the same supplier and generated files as
-    eHerkenning. If you plan on adding eIDAS support to Open Forms, it's best
-    to do these 2 at the same time.
-
-
 Step by step overview
 =====================
 
+The high-level overview of steps you need to perform are described here. The following
+sections provide more details.
+
 1. Contact an `approved eHerkenning supplier`_ to get started. Sometimes, your
    Open Forms supplier can communicate directly with the eHerkenning supplier.
    Make sure you indicate if you want to connect using eHerkenning, eIDAS or
@@ -51,9 +72,13 @@ Step by step overview
    communication with your eHerkenning supplier (if you already have one for
    Open Forms, it can be re-used).
 
+   You can :ref:`prepare the certificates <configuration_authentication_eh_prepare_certificates>`
+   from the admin interface.
+
 3. Send the following information to your Open Forms supplier:
 
-   * Public and private certificate (obtained in step 2)
+   * Public and private certificate (obtained in step 2, private certificate is already
+     present if you generated the Signing Request (CSR) via the admin)
    * Name of the approved eHerkenning supplier
    * The desired consuming service indexes (or Service IDs)
    * Desired service name(s) in Dutch and English (for example: "Digitaal Loket")
@@ -66,6 +91,115 @@ Step by step overview
 
 4. Your eHerkenning supplier will inform you when everything is set up.
 
+.. _configuration_authentication_eh_prepare_certificates:
+
+Preparing the certificates
+==========================
+
+To request a *PKIoverheid certificate*, you need a private key and a certificate signing
+request. You can generate these using ``openssl`` or other utilities, or use the built-in
+signing requests in the admin interface.
+
+.. tip:: Creating the signing requests from the admin ensures the private key never
+   leaves the server, lessening the chances that it is accidentally leaked.
+
+**Using the admin interface**
+
+#. Navigate to the **Admin**.
+#. In the menu, navigate to **Configuration** > **Signing requests**.
+#. In the top right of the page, click the **Add signing request** button.
+#. Enter the desired fields - the information will be included in the signing request.
+   Consult with your certificate supplier which data is required and what values are
+   expected.
+#. Click **Save** to persist the changes. The page is reloaded.
+#. Under the section *Signing request (CSR)*, click the **Download CSR** link.
+
+Now, send the downloaded CSR to your certificate supplier and wait for them to verify
+it and provide you with the matching certificate. This can take some time (hours to
+days), as verification is often a manual process.
+
+Once you have received the certificate, navigate back to the admin and locate your
+signing request.
+
+#. Edit the original signing request record in the admin.
+#. Navigate to the *Upload signed certificate* section.
+#. Upload the certificate provided by the certificate supplier.
+#. Save the changes.
+
+If everything is valid, the private key + public cerificate pair is now available and
+almost ready for use. You can verify it in the admin via **Configuration** >
+**Certificates**.
+
+You can now proceed to :ref:`configuration_authentication_eh_metadata`.
+
+
+.. _configuration_authentication_eh_metadata:
+
+Generating the Service Provider metadata
+========================================
+
+In the admin environment we can configure the DigiD identity provider and select our
+required certificate pair(s). Once this is done, we can generate our service provider
+metadata.
+
+#. Navigate to the **Admin**.
+#. In the menu, navigate to **Configuration** > **EHerkenning/eIDAS configuration**.
+#. Under the *X.509 Certificate* section, click the **Manage (number)** link.
+#. Click the **Add Digid/eHerkenning certificate** button in the top right of the page.
+#. For **Config type**, select "eHerkenning".
+#. For **Certificate**, click the search icon and select the certificate pair that was
+   created earlier (in the :ref:`configuration_authentication_eh_prepare_certificates`
+   section).
+#. **Save** the configuration and close the window/tab.
+#. Continue on the *EHerkenning/eIDAS configuration* page.
+#. In the section *Identity provider*, enter the identity provider
+   **metadata file (XML) URL**. This URL should be provided by your broker/supplier. The
+   metadata will be retrieved and processed.
+#. Next, in the section *SAML configuration*, enter the fields:
+
+   * **Entity ID**: This is the entity ID of Open-Forms.
+   * **Base URL**: Enter the URL where Open-Forms is deployed (and publicly accessible).
+   * **Resolve artifact binding content type**: select ``text/xml`` unless you're using
+     old/legacy brokers or are instructed to pick ``application/soap+xml``.
+   * **Want assertions signed**: This should be **checked**.
+   * **Want assertions encrypted**: This should be **unchecked**.
+   * **Signature algorithm**: Select ``RSA_SHA256``.
+   * **Digest algorithm**: Select ``SHA256``.
+
+#. Continue to the section *Service details* and fill out the fields:
+
+   * **Service name**: This is the name of the service for which authentication is needed.
+   * **Service description**: A description of the service for which authentication is needed.
+   * **OIN**: Enter your OIN_.
+   * **Broker ID**: Specify the OIN_ of your broker.
+   * **Privacy policy**: Enter the link to the webpage where your privacy policy is
+     hosted.
+   * **Service language**: Enter ``nl``.
+
+#. Next, in the section *eHerkenning* you can configurare parameters for eHerkenning:
+
+    * **Requested attributes**: leave empty. Definitely do *not* include
+      ``urn:etoegang:1.9:EntityConcernedID:KvKnr`` as this is managed elsewhere.
+    * **EHerkenning LOA**: "Low (2+)" is the minimum required level.
+
+#. Optionally, configure the same parameters for *eIDAS* or check the **No eIDAS**
+   checkbox to omit it.
+
+#. Finally, you should provide some *organization details* - provide the telephone/e-mail
+   contacts of the organisation responsible for the service requiring eHerkenning/eIDAS
+   authentication.
+
+Click on **Save and continue editing** to persist the configuration changes.
+
+On the top right corner of the configuration page, there is a button
+**View SAML metadata (XML)**. Click this button to download the metadata. The metadata
+needs to be sent to the broker to obtain access to a (pre-)production environment.
+
+.. note::
+
+   Any changes to the configuration in the Admin page cause a change in the metadata.
+   The updated metadata must be then sent to the broker again for the changes to be effective.
+
 .. _`PKIoverheid Private Services Server G1`: https://cert.pkioverheid.nl/
 .. _`PKIO SSL certificate supplier`: https://www.logius.nl/domeinen/toegang/pkioverheidcertificaat-aanvragen
 .. _`eHerkenning`: https://www.logius.nl/diensten/eherkenning