Merge branch 'main' into attributes-limit

.github/repository-settings.md

@@ -0,0 +1,38 @@
+# Process
+
+This file documents local admin changes for opentelemetry-cpp,
+per the community process: https://github.com/open-telemetry/community/blob/main/docs/how-to-configure-new-repository.md
+
+Please note that the EasyCLA check **MUST** stay **REQUIRED**,
+it should never be disabled or bypassed, at the risk of tainting the repository.
+
+# Guidelines
+
+The best is to open a PR first that describes the change,
+so it can be discussed during review (maybe it is not needed,
+maybe there is an alternate solution, ...).
+
+The PR must add a log entry in this file, detailing:
+
+* the date the change is implemented
+* what is changed exactly (which setting)
+* a short rationale
+
+Admin changes are then applied only when the PR is merged.
+
+If for some reason a change is implemented in emergency,
+before a PR can be discussed and merged,
+a PR should still be prepared and pushed after the fact to
+describe the settings changed.
+
+# Log of local changes
+
+## 2023-11-03
+
+Created log file `.github/repository-settings.md`, since admin permissions are now granted to maintainers.
+
+See https://github.com/open-telemetry/community/issues/1727
+
+No setting changed.
+
+

.github/workflows/project_management_comment.yml

@@ -12,7 +12,7 @@ jobs:
       issues: write
     steps:
       - name: Add comment
-        uses: peter-evans/create-or-update-comment@c6c9a1a66007646a28c153e2a8580a5bad27bcfa
+        uses: peter-evans/create-or-update-comment@23ff15729ef2fc348714a3bb66d2f655ca9066f2
         with:
           issue-number: ${{ github.event.issue.number }}
           body: |

CHANGELOG.md

@@ -15,23 +15,134 @@ Increment the:
 
 ## [Unreleased]
 
+* [BUILD] Remove WITH_REMOVE_METER_PREVIEW, use WITH_ABI_VERSION_2 instead
+  [#2370](https://github.com/open-telemetry/opentelemetry-cpp/pull/2370)
+* [BUILD] Make WITH_OTLP_HTTP_SSL_PREVIEW mainstream
+  [#2378](https://github.com/open-telemetry/opentelemetry-cpp/pull/2378)
+* [API] Add InstrumentationScope attributes in TracerProvider::GetTracer()
+  [#2371](https://github.com/open-telemetry/opentelemetry-cpp/pull/2371)
+* [BUILD] enum CanonicalCode names too generic... conflict with old C defines
+  [#2385](https://github.com/open-telemetry/opentelemetry-cpp/pull/2385)
+* [API] Add a new AddLink() operation to Span
+  [#2380](https://github.com/open-telemetry/opentelemetry-cpp/pull/2380)
+
+Important changes:
+
+* [API] Add InstrumentationScope attributes in TracerProvider::GetTracer()
+  [#2371](https://github.com/open-telemetry/opentelemetry-cpp/pull/2371)
+  * TracerProvider::GetTracer() now accepts InstrumentationScope attributes.
+  * Because this is an `ABI` breaking change, the fix is only available
+    with the `CMake` option `WITH_ABI_VERSION_2=ON`.
+  * When building with `CMake` option `WITH_ABI_VERSION_1=ON` (by default)
+    the `ABI` is unchanged, and the fix is not available.
+
+* [API] Add a new AddLink() operation to Span
+  [#2380](https://github.com/open-telemetry/opentelemetry-cpp/pull/2380)
+  * New `API` Span::AddLink() adds a single link to a span.
+  * New `API` Span::AddLinks() adds multiple links to a span.
+  * Because this is an `ABI` breaking change, the fix is only available
+    with the `CMake` option `WITH_ABI_VERSION_2=ON`.
+  * When building with `CMake` option `WITH_ABI_VERSION_1=ON` (by default)
+    the `ABI` is unchanged, and the fix is not available.
+
+* [BUILD] Make WITH_OTLP_HTTP_SSL_PREVIEW mainstream
+  [#2378](https://github.com/open-telemetry/opentelemetry-cpp/pull/2378)
+  * The experimental `CMake` option `WITH_OTLP_HTTP_SSL_PREVIEW`
+    is now promoted to stable. The default is changed to `ON`.
+  * The experimental `CMake` option `WITH_OTLP_HTTP_SSL_TLS_PREVIEW`
+    is now promoted to stable. The default is changed to `ON`.
+  * These build options are scheduled to be removed by the next release,
+    building without SSL/TLS will no longer be possible.
+
+Breaking changes:
+
+* [BUILD] Remove WITH_REMOVE_METER_PREVIEW, use WITH_ABI_VERSION_2 instead
+  [#2370](https://github.com/open-telemetry/opentelemetry-cpp/pull/2370)
+  * The experimental `CMake` option `WITH_REMOVE_METER_PREVIEW` is removed,
+    use option `WITH_ABI_VERSION_2` instead.
+
+* [BUILD] enum CanonicalCode names too generic... conflict with old C defines
+  [#2385](https://github.com/open-telemetry/opentelemetry-cpp/pull/2385)
+  * Header file `opentelemetry/trace/canonical_code.h` is unused,
+    and is now removed.
+  * This header should not be included directly in an application.
+    If this is the case, please remove any remaining include directives.
+
+* [BUILD] Fix exported definitions when building DLL with STL
+  [#2387](https://github.com/open-telemetry/opentelemetry-cpp/pull/2387)
+  * The MeterSelector, MeterSelectorFactory, InstrumentSelector,
+    and InstrumentSelectorFactory APIs now use const std::string&
+    instead of nostd::string_view for name, version and schema to
+    maintain a single export definition for DLL.
+
+## [1.12.0] 2023-10-16
+
+* [BUILD] Support `pkg-config`
+  [#2269](https://github.com/open-telemetry/opentelemetry-cpp/pull/2269)
+* [CI] Do not automatically close stale issues
+  [#2277](https://github.com/open-telemetry/opentelemetry-cpp/pull/2277)
+* [CI] Benchmark workflow fails, C++14 required to build grpc
+  [#2278](https://github.com/open-telemetry/opentelemetry-cpp/pull/2278)
+* [SDK] Increase metric name maximum length from 63 to 255 characters
+  [#2284](https://github.com/open-telemetry/opentelemetry-cpp/pull/2284)
+* [SEMANTIC CONVENTION] Deprecated semconv (in the spec)
+  not deprecated (in C++)
+  [#2285](https://github.com/open-telemetry/opentelemetry-cpp/pull/2285)
+* [SDK] Remove unused member variables from SyncMetricStorage
+  [#2294](https://github.com/open-telemetry/opentelemetry-cpp/pull/2294)
 * [DEPRECATION] Deprecate ZPAGES
   [#2291](https://github.com/open-telemetry/opentelemetry-cpp/pull/2291)
-* [EXPORTER] Prometheus exporter emit resource attributes
-  [#2301](https://github.com/open-telemetry/opentelemetry-cpp/pull/2301)
-* [EXPORTER] Remove explicit timestamps from metric points exported by Prometheus
+* [API] Deliver ABI breaking changes
+  [#2222](https://github.com/open-telemetry/opentelemetry-cpp/pull/2222)
+* [SDK] Allow metric instrument names to contain / characters
+  [#2310](https://github.com/open-telemetry/opentelemetry-cpp/pull/2310)
+* [SDK] Fix Observable Counters/UpDownCounters
+  [#2298](https://github.com/open-telemetry/opentelemetry-cpp/pull/2298)
+* [SDK] Add exemplar reservoir to async metric storage
+  [#2319](https://github.com/open-telemetry/opentelemetry-cpp/pull/2319)
+* [TEST] Fix lifetime issues in prometheus test utils
+  [#2322](https://github.com/open-telemetry/opentelemetry-cpp/pull/2322)
+* [EXPORTER] Prometheus: Remove explicit timestamps from metric points
   [#2324](https://github.com/open-telemetry/opentelemetry-cpp/pull/2324)
-* [EXPORTER] Handle attribute key collisions caused by sanitation
+* [EXPORTER] Prometheus: Handle attribute key collisions from sanitation
   [#2326](https://github.com/open-telemetry/opentelemetry-cpp/pull/2326)
-* [EXPORTER] Replace colons with underscores when converting to Prometheus label
+* [EXPORTER] Prometheus cleanup, test with TranslateToPrometheus
+  [#2329](https://github.com/open-telemetry/opentelemetry-cpp/pull/2329)
+* [SDK] Fix log message in Meter::RegisterSyncMetricStorage
+  [#2325](https://github.com/open-telemetry/opentelemetry-cpp/pull/2325)
+* [DOC] Simplify the project status section
+  [#2332](https://github.com/open-telemetry/opentelemetry-cpp/pull/2332)
+* [EXPORTER] Prometheus: Sanitize labels according to spec
   [#2330](https://github.com/open-telemetry/opentelemetry-cpp/pull/2330)
+* [SDK] Fix deadlock when shuting down http client
+  [#2337](https://github.com/open-telemetry/opentelemetry-cpp/pull/2337)
+* [Exporter] Group spans by resource and instrumentation scope
+  in OTLP export requests
+  [#2335](https://github.com/open-telemetry/opentelemetry-cpp/pull/2335)
+* [BUILD] Need fine-grained HAVE_CPP_STDLIB
+  [#2304](https://github.com/open-telemetry/opentelemetry-cpp/pull/2304)
 * [API] Add InstrumentationScope attributes in MeterProvider::GetMeter()
   [#2224](https://github.com/open-telemetry/opentelemetry-cpp/pull/2224)
 * [REMOVAL] Drop C++11 support
   [#2342](https://github.com/open-telemetry/opentelemetry-cpp/pull/2342)
-* [EXPORTER] Add otel_scope_name and otel_scope_version labels to the prometheus
-  exporter.
+* [EXPORTER] prometheus: add otel_scope_name and otel_scope_version labels
   [#2293](https://github.com/open-telemetry/opentelemetry-cpp/pull/2293)
+* [EXPORTER] Export resource for prometheus
+  [#2301](https://github.com/open-telemetry/opentelemetry-cpp/pull/2301)
+* [BUILD] error: read-only reference ‘value’ used as ‘asm’ output
+  [#2354](https://github.com/open-telemetry/opentelemetry-cpp/pull/2354)
+* [BUILD] Build break with external CMake nlohman_json package
+  [#2353](https://github.com/open-telemetry/opentelemetry-cpp/pull/2353)
+* [BUILD] Upgrade libcurl to version 8.4.0
+  [#2358](https://github.com/open-telemetry/opentelemetry-cpp/pull/2358)
+* [BUILD] Fix opentracing-shim when added in super project
+  [#2356](https://github.com/open-telemetry/opentelemetry-cpp/pull/2356)
+* [BUILD] Fix protoc searching with non-imported protobuf::protoc target
+  [#2362](https://github.com/open-telemetry/opentelemetry-cpp/pull/2362)
+* [BUILD] Support to use different cmake package CONFIG of dependencies
+  [#2263](https://github.com/open-telemetry/opentelemetry-cpp/pull/2263)
+* [SEMANTIC CONVENTION] Upgrade to semconv 1.22.0
+  [#2368](https://github.com/open-telemetry/opentelemetry-cpp/pull/2368)
 
 Important changes:
 
@@ -70,6 +181,11 @@ Breaking changes:
   [#2342](https://github.com/open-telemetry/opentelemetry-cpp/pull/2342)
   * Building with C++11 is no longer supported.
 
+Deprecations:
+
+* [DEPRECATION] Deprecate ZPAGES
+  [#2291](https://github.com/open-telemetry/opentelemetry-cpp/pull/2291)
+
 ## [1.11.0] 2023-08-21
 
 * [BUILD] Fix more cases for symbol name for 32-bit win32 DLL build

CMakeLists.txt

@@ -275,12 +275,12 @@ endif()
 
 option(WITH_ASYNC_EXPORT_PREVIEW "Whether to enable async export" OFF)
 
-# EXPERIMENTAL
-option(WITH_OTLP_HTTP_SSL_PREVIEW "Whether to enable otlp http ssl export" OFF)
+# STABLE
+option(WITH_OTLP_HTTP_SSL_PREVIEW "Whether to enable otlp http ssl export" ON)
 
-# EXPERIMENTAL
+# STABLE
 option(WITH_OTLP_HTTP_SSL_TLS_PREVIEW
-       "Whether to enable otlp http ssl tls min/max/cipher options" OFF)
+       "Whether to enable otlp http ssl tls min/max/cipher options" ON)
 
 # Exemplar specs status is experimental, so behind feature flag by default
 option(WITH_METRICS_EXEMPLAR_PREVIEW
@@ -430,6 +430,11 @@ if(WITH_OTLP_GRPC OR WITH_OTLP_HTTP)
   if(TARGET protobuf::protoc)
     project_build_tools_get_imported_location(PROTOBUF_PROTOC_EXECUTABLE
                                               protobuf::protoc)
+    # If protobuf::protoc is not a imported target, then we use the target
+    # directly for fallback
+    if(NOT PROTOBUF_PROTOC_EXECUTABLE)
+      set(PROTOBUF_PROTOC_EXECUTABLE protobuf::protoc)
+    endif()
   elseif(Protobuf_PROTOC_EXECUTABLE)
     # Some versions of FindProtobuf.cmake uses mixed case instead of uppercase
     set(PROTOBUF_PROTOC_EXECUTABLE ${Protobuf_PROTOC_EXECUTABLE})
@@ -683,6 +688,7 @@ if(NOT WITH_API_ONLY)
 endif()
 
 include(cmake/opentelemetry-build-external-component.cmake)
+include(cmake/patch-imported-config.cmake)
 
 if(OPENTELEMETRY_INSTALL)
   # Export cmake config and support find_packages(opentelemetry-cpp CONFIG)

api/CMakeLists.txt

@@ -114,11 +114,6 @@ if(WITH_ASYNC_EXPORT_PREVIEW)
   target_compile_definitions(opentelemetry_api INTERFACE ENABLE_ASYNC_EXPORT)
 endif()
 
-if(WITH_REMOVE_METER_PREVIEW)
-  target_compile_definitions(opentelemetry_api
-                             INTERFACE ENABLE_REMOVE_METER_PREVIEW)
-endif()
-
 target_compile_definitions(
   opentelemetry_api
   INTERFACE OPENTELEMETRY_ABI_VERSION_NO=${OPENTELEMETRY_ABI_VERSION_NO})

api/include/opentelemetry/metrics/meter_provider.h

@@ -126,7 +126,19 @@ class MeterProvider
                                             nostd::string_view schema_url = "") noexcept = 0;
 #endif
 
-#ifdef ENABLE_REMOVE_METER_PREVIEW
+#if OPENTELEMETRY_ABI_VERSION_NO >= 2
+  /**
+   * Remove a named Meter instance (ABI).
+   *
+   * This API is experimental, see
+   * https://github.com/open-telemetry/opentelemetry-specification/issues/2232
+   *
+   * @since ABI_VERSION 2
+   *
+   * @param[in] name Meter instrumentation scope
+   * @param[in] version Instrumentation scope version, optional
+   * @param[in] schema_url Instrumentation scope schema URL, optional
+   */
   virtual void RemoveMeter(nostd::string_view name,
                            nostd::string_view version    = "",
                            nostd::string_view schema_url = "") noexcept = 0;

api/include/opentelemetry/metrics/noop.h

@@ -214,7 +214,7 @@ class NoopMeterProvider final : public MeterProvider
   }
 #endif
 
-#ifdef ENABLE_REMOVE_METER_PREVIEW
+#if OPENTELEMETRY_ABI_VERSION_NO >= 2
   void RemoveMeter(nostd::string_view /* name */,
                    nostd::string_view /* version */,
                    nostd::string_view /* schema_url */) noexcept override

api/include/opentelemetry/plugin/tracer.h

@@ -7,6 +7,7 @@
 
 #include "opentelemetry/common/key_value_iterable.h"
 #include "opentelemetry/plugin/detail/tracer_handle.h"
+#include "opentelemetry/trace/span_context_kv_iterable.h"
 #include "opentelemetry/trace/tracer.h"
 #include "opentelemetry/version.h"
 
@@ -49,6 +50,19 @@ class Span final : public trace::Span
     span_->AddEvent(name, timestamp, attributes);
   }
 
+#if OPENTELEMETRY_ABI_VERSION_NO >= 2
+  void AddLink(const trace::SpanContext &target,
+               const common::KeyValueIterable &attrs) noexcept override
+  {
+    span_->AddLink(target, attrs);
+  }
+
+  void AddLinks(const trace::SpanContextKeyValueIterable &links) noexcept override
+  {
+    span_->AddLinks(links);
+  }
+#endif
+
   void SetStatus(trace::StatusCode code, nostd::string_view description) noexcept override
   {
     span_->SetStatus(code, description);