cumulus-pov-recovery: check pov_hash instead of reencoding data (#2287)

Collators were previously reencoding the available data and checking the
erasure root.
Replace that with just checking the PoV hash, which consumes much less
CPU and takes less time.

We also don't need to check the `PersistedValidationData` hash, as
collators don't use it.

Reason:
#575 (comment)

After systematic chunks recovery is merged, collators will no longer do
any reed-solomon encoding/decoding, which has proven to be a great CPU
consumer.

Signed-off-by: alindima <[email protected]>

cumulus/client/pov-recovery/src/active_candidate_recovery.rs

@@ -16,12 +16,12 @@
 
 use sp_runtime::traits::Block as BlockT;
 
-use polkadot_node_primitives::AvailableData;
+use polkadot_node_primitives::PoV;
 use polkadot_node_subsystem::messages::AvailabilityRecoveryMessage;
 
 use futures::{channel::oneshot, stream::FuturesUnordered, Future, FutureExt, StreamExt};
 
-use std::{collections::HashSet, pin::Pin};
+use std::{collections::HashSet, pin::Pin, sync::Arc};
 
 use crate::RecoveryHandle;
 
@@ -30,9 +30,8 @@ use crate::RecoveryHandle;
 /// This handles the candidate recovery and tracks the activate recoveries.
 pub(crate) struct ActiveCandidateRecovery<Block: BlockT> {
 	/// The recoveries that are currently being executed.
-	recoveries: FuturesUnordered<
-		Pin<Box<dyn Future<Output = (Block::Hash, Option<AvailableData>)> + Send>>,
-	>,
+	recoveries:
+		FuturesUnordered<Pin<Box<dyn Future<Output = (Block::Hash, Option<Arc<PoV>>)> + Send>>>,
 	/// The block hashes of the candidates currently being recovered.
 	candidates: HashSet<Block::Hash>,
 	recovery_handle: Box<dyn RecoveryHandle>,
@@ -68,7 +67,7 @@ impl<Block: BlockT> ActiveCandidateRecovery<Block> {
 		self.recoveries.push(
 			async move {
 				match rx.await {
-					Ok(Ok(res)) => (block_hash, Some(res)),
+					Ok(Ok(res)) => (block_hash, Some(res.pov)),
 					Ok(Err(error)) => {
 						tracing::debug!(
 							target: crate::LOG_TARGET,
@@ -93,8 +92,8 @@ impl<Block: BlockT> ActiveCandidateRecovery<Block> {
 
 	/// Waits for the next recovery.
 	///
-	/// If the returned [`AvailableData`] is `None`, it means that the recovery failed.
-	pub async fn wait_for_recovery(&mut self) -> (Block::Hash, Option<AvailableData>) {
+	/// If the returned [`PoV`] is `None`, it means that the recovery failed.
+	pub async fn wait_for_recovery(&mut self) -> (Block::Hash, Option<Arc<PoV>>) {
 		loop {
 			if let Some(res) = self.recoveries.next().await {
 				self.candidates.remove(&res.0);

cumulus/client/pov-recovery/src/lib.rs

@@ -51,7 +51,7 @@ use sc_consensus::import_queue::{ImportQueueService, IncomingBlock};
 use sp_consensus::{BlockOrigin, BlockStatus, SyncOracle};
 use sp_runtime::traits::{Block as BlockT, Header as HeaderT, NumberFor};
 
-use polkadot_node_primitives::{AvailableData, POV_BOMB_LIMIT};
+use polkadot_node_primitives::{PoV, POV_BOMB_LIMIT};
 use polkadot_node_subsystem::messages::AvailabilityRecoveryMessage;
 use polkadot_overseer::Handle as OverseerHandle;
 use polkadot_primitives::{
@@ -346,15 +346,11 @@ where
 	}
 
 	/// Handle a recovered candidate.
-	async fn handle_candidate_recovered(
-		&mut self,
-		block_hash: Block::Hash,
-		available_data: Option<AvailableData>,
-	) {
-		let available_data = match available_data {
-			Some(data) => {
+	async fn handle_candidate_recovered(&mut self, block_hash: Block::Hash, pov: Option<&PoV>) {
+		let pov = match pov {
+			Some(pov) => {
 				self.candidates_in_retry.remove(&block_hash);
-				data
+				pov
 			},
 			None =>
 				if self.candidates_in_retry.insert(block_hash) {
@@ -373,18 +369,16 @@ where
 				},
 		};
 
-		let raw_block_data = match sp_maybe_compressed_blob::decompress(
-			&available_data.pov.block_data.0,
-			POV_BOMB_LIMIT,
-		) {
-			Ok(r) => r,
-			Err(error) => {
-				tracing::debug!(target: LOG_TARGET, ?error, "Failed to decompress PoV");
+		let raw_block_data =
+			match sp_maybe_compressed_blob::decompress(&pov.block_data.0, POV_BOMB_LIMIT) {
+				Ok(r) => r,
+				Err(error) => {
+					tracing::debug!(target: LOG_TARGET, ?error, "Failed to decompress PoV");
 
-				self.reset_candidate(block_hash);
-				return
-			},
-		};
+					self.reset_candidate(block_hash);
+					return
+				},
+			};
 
 		let block_data = match ParachainBlockData::<Block>::decode(&mut &raw_block_data[..]) {
 			Ok(d) => d,
@@ -595,10 +589,10 @@ where
 				next_to_recover = self.candidate_recovery_queue.next_recovery().fuse() => {
 						self.recover_candidate(next_to_recover).await;
 				},
-				(block_hash, available_data) =
+				(block_hash, pov) =
 					self.active_candidate_recovery.wait_for_recovery().fuse() =>
 				{
-					self.handle_candidate_recovered(block_hash, available_data).await;
+					self.handle_candidate_recovered(block_hash, pov.as_deref()).await;
 				},
 			}
 		}

cumulus/client/relay-chain-minimal-node/src/collator_overseer.rs

@@ -102,7 +102,7 @@ fn build_overseer(
 	let network_bridge_metrics: NetworkBridgeMetrics = Metrics::register(registry)?;
 	let builder = Overseer::builder()
 		.availability_distribution(DummySubsystem)
-		.availability_recovery(AvailabilityRecoverySubsystem::with_availability_store_skip(
+		.availability_recovery(AvailabilityRecoverySubsystem::for_collator(
 			available_data_req_receiver,
 			Metrics::register(registry)?,
 		))

polkadot/node/network/availability-recovery/src/lib.rs

@@ -105,6 +105,17 @@ pub struct AvailabilityRecoverySubsystem {
 	req_receiver: IncomingRequestReceiver<request_v1::AvailableDataFetchingRequest>,
 	/// Metrics for this subsystem.
 	metrics: Metrics,
+	/// The type of check to perform after available data was recovered.
+	post_recovery_check: PostRecoveryCheck,
+}
+
+#[derive(Clone, PartialEq, Debug)]
+/// The type of check to perform after available data was recovered.
+pub enum PostRecoveryCheck {
+	/// Reencode the data and check erasure root. For validators.
+	Reencode,
+	/// Only check the pov hash. For collators only.
+	PovHash,
 }
 
 /// Expensive erasure coding computations that we want to run on a blocking thread.
@@ -344,6 +355,7 @@ async fn launch_recovery_task<Context>(
 	metrics: &Metrics,
 	recovery_strategies: VecDeque<Box<dyn RecoveryStrategy<<Context as SubsystemContext>::Sender>>>,
 	bypass_availability_store: bool,
+	post_recovery_check: PostRecoveryCheck,
 ) -> error::Result<()> {
 	let candidate_hash = receipt.hash();
 	let params = RecoveryParams {
@@ -354,6 +366,8 @@ async fn launch_recovery_task<Context>(
 		erasure_root: receipt.descriptor.erasure_root,
 		metrics: metrics.clone(),
 		bypass_availability_store,
+		post_recovery_check,
+		pov_hash: receipt.descriptor.pov_hash,
 	};
 
 	let recovery_task = RecoveryTask::new(ctx.sender().clone(), params, recovery_strategies);
@@ -390,6 +404,7 @@ async fn handle_recover<Context>(
 	erasure_task_tx: futures::channel::mpsc::Sender<ErasureTask>,
 	recovery_strategy_kind: RecoveryStrategyKind,
 	bypass_availability_store: bool,
+	post_recovery_check: PostRecoveryCheck,
 ) -> error::Result<()> {
 	let candidate_hash = receipt.hash();
 
@@ -486,6 +501,7 @@ async fn handle_recover<Context>(
 				metrics,
 				recovery_strategies,
 				bypass_availability_store,
+				post_recovery_check,
 			)
 			.await
 		},
@@ -527,15 +543,17 @@ async fn query_chunk_size<Context>(
 
 #[overseer::contextbounds(AvailabilityRecovery, prefix = self::overseer)]
 impl AvailabilityRecoverySubsystem {
-	/// Create a new instance of `AvailabilityRecoverySubsystem` which never requests the
-	/// `AvailabilityStoreSubsystem` subsystem.
-	pub fn with_availability_store_skip(
+	/// Create a new instance of `AvailabilityRecoverySubsystem` suitable for collator nodes,
+	/// which never requests the `AvailabilityStoreSubsystem` subsystem and only checks the POV hash
+	/// instead of reencoding the available data.
+	pub fn for_collator(
 		req_receiver: IncomingRequestReceiver<request_v1::AvailableDataFetchingRequest>,
 		metrics: Metrics,
 	) -> Self {
 		Self {
 			recovery_strategy_kind: RecoveryStrategyKind::BackersFirstIfSizeLower(SMALL_POV_LIMIT),
 			bypass_availability_store: true,
+			post_recovery_check: PostRecoveryCheck::PovHash,
 			req_receiver,
 			metrics,
 		}
@@ -550,6 +568,7 @@ impl AvailabilityRecoverySubsystem {
 		Self {
 			recovery_strategy_kind: RecoveryStrategyKind::BackersFirstAlways,
 			bypass_availability_store: false,
+			post_recovery_check: PostRecoveryCheck::Reencode,
 			req_receiver,
 			metrics,
 		}
@@ -563,6 +582,7 @@ impl AvailabilityRecoverySubsystem {
 		Self {
 			recovery_strategy_kind: RecoveryStrategyKind::ChunksAlways,
 			bypass_availability_store: false,
+			post_recovery_check: PostRecoveryCheck::Reencode,
 			req_receiver,
 			metrics,
 		}
@@ -577,15 +597,21 @@ impl AvailabilityRecoverySubsystem {
 		Self {
 			recovery_strategy_kind: RecoveryStrategyKind::BackersFirstIfSizeLower(SMALL_POV_LIMIT),
 			bypass_availability_store: false,
+			post_recovery_check: PostRecoveryCheck::Reencode,
 			req_receiver,
 			metrics,
 		}
 	}
 
 	async fn run<Context>(self, mut ctx: Context) -> SubsystemResult<()> {
 		let mut state = State::default();
-		let Self { mut req_receiver, metrics, recovery_strategy_kind, bypass_availability_store } =
-			self;
+		let Self {
+			mut req_receiver,
+			metrics,
+			recovery_strategy_kind,
+			bypass_availability_store,
+			post_recovery_check,
+		} = self;
 
 		let (erasure_task_tx, erasure_task_rx) = futures::channel::mpsc::channel(16);
 		let mut erasure_task_rx = erasure_task_rx.fuse();
@@ -675,7 +701,8 @@ impl AvailabilityRecoverySubsystem {
 										&metrics,
 										erasure_task_tx.clone(),
 										recovery_strategy_kind.clone(),
-										bypass_availability_store
+										bypass_availability_store,
+										post_recovery_check.clone()
 									).await {
 										gum::warn!(
 											target: LOG_TARGET,