Merge pull request adafruit#9801 from 0xCB-dev/main

add support for 0xCB Gemini rp2040 controller

ports/raspberrypi/boards/0xcb_gemini/board.c

@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Conor Burns for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/raspberrypi/boards/0xcb_gemini/mpconfigboard.h

@@ -0,0 +1,22 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Conor Burns for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+#define MICROPY_HW_BOARD_NAME "0xCB Gemini"
+#define MICROPY_HW_MCU_NAME "rp2040"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO16)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO3)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO6)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO7)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO4)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO1)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO0)

ports/raspberrypi/boards/0xcb_gemini/mpconfigboard.mk

@@ -0,0 +1,9 @@
+USB_VID = 0x1209
+USB_PID = 0xCB65
+USB_PRODUCT = "Gemini"
+USB_MANUFACTURER = "0xCB"
+
+CHIP_VARIANT = RP2040
+CHIP_FAMILY = rp2
+
+EXTERNAL_FLASH_DEVICES = "W25Q128JVxQ"

ports/raspberrypi/boards/0xcb_gemini/pico-sdk-configboard.h

@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Conor Burns for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Put board-specific pico-sdk definitions here. This file must exist.

ports/raspberrypi/boards/0xcb_gemini/pins.c

@@ -0,0 +1,71 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2024 Conor Burns for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // Right side top to bottom
+    { MP_ROM_QSTR(MP_QSTR_GP0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_GP1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_GP2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_SDA),  MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_GP3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_SCL),  MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_GP4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_SDI), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_GP5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_GP6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_GP7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_SDO), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_GP8), MP_ROM_PTR(&pin_GPIO8) },
+
+    // Bottom side right to left
+    { MP_ROM_QSTR(MP_QSTR_GP9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_GP10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_GP11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_GP12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_GP13), MP_ROM_PTR(&pin_GPIO13) },
+
+
+    // Left side bottom to top
+    { MP_ROM_QSTR(MP_QSTR_GP14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_GP15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_GP26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_GP27), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) },
+    { MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO28) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) },
+    { MP_ROM_QSTR(MP_QSTR_GP29), MP_ROM_PTR(&pin_GPIO29) },
+    { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) },
+
+    // Backside bottom to top
+    { MP_ROM_QSTR(MP_QSTR_GP16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_GP17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_GP18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_GP19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO22) },
+    { MP_ROM_QSTR(MP_QSTR_GP23), MP_ROM_PTR(&pin_GPIO23) },
+    { MP_ROM_QSTR(MP_QSTR_GP24), MP_ROM_PTR(&pin_GPIO24) },
+    { MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO25) },
+
+    // VBUS sense voltage divider when jumper connected https://docs.keeb.supply/0xcb-gemini/guide/#split-capability
+    { MP_ROM_QSTR(MP_QSTR_VBUS_SENSE), MP_ROM_PTR(&pin_GPIO19) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);