Replace zcat #468
Merged
Replace zcat #468
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* D3-Enhancements (#78) * Sam/try plots (#71) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- Co-authored-by: Cole Lyman <[email protected]> * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- Co-authored-by: Sam <[email protected]> * Try catch all futures * Fix test fail plots * Point test to try-plots * Fix d3 not showing and plotly mixing with matplotlib * Use logger for warnings and debug statements * Point tests back at master --------- Co-authored-by: mbowcut2 <[email protected]> Co-authored-by: Cole Lyman <[email protected]> * Sam/fix plots (#72) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- Co-authored-by: Cole Lyman <[email protected]> * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- Co-authored-by: Sam <[email protected]> * Try catch all futures * Fix test fail plots * Fix d3 not showing and plotly mixing with matplotlib --------- Co-authored-by: mbowcut2 <[email protected]> Co-authored-by: Cole Lyman <[email protected]> * Remove token from integration tests file * Provide sgRNA_sequences to plot_nucleotide_quilt plots * Passing sgRNA_sequences to plot * Refactor check for determining when to use CRISPREssoPro or matplotlib for Batch plots * Add max-height to Batch report samples * Change testing branch * Fix wrong check for large Batch plots * Fix typo and move flexiguide to debug (#77) * Change flexiguide output to debug level * Fix typo in fastp merged output file name * Adding id tags for d3 script enhancements * pointing to test branch * Add amplicon_name parameter to allele heatmap and line plots * Add function to extract quantification window regions from include_idxs * Scale the quantification window according to the coordinates of the sgRNA plot * added c2pro check, added space in args.json * Correct the quantification window indexes for multiple guides * Fix name of nucleotide conversion plot when guides are not the same * Fix jinja variables that aren't found * Fix multiple guide errors where the wrong sgRNA sequence was associated in d3 plot * Remove unneeded variable and extra whitespace * Switch test branch to master --------- Co-authored-by: Samuel Nichols <[email protected]> Co-authored-by: mbowcut2 <[email protected]> Co-authored-by: Cole Lyman <[email protected]> * Replace zcat with gunzip -c in `get_most_frequent_reads` --------- Co-authored-by: Trevor Martin <[email protected]> Co-authored-by: Samuel Nichols <[email protected]> Co-authored-by: mbowcut2 <[email protected]>
mbowcut2
added a commit
to edilytics/CRISPResso2
that referenced
this pull request
Aug 15, 2024
* D3-Enhancements (#78) * Sam/try plots (#71) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Point test to try-plots * Fix d3 not showing and plotly mixing with matplotlib * Use logger for warnings and debug statements * Point tests back at master --------- * Sam/fix plots (#72) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Fix d3 not showing and plotly mixing with matplotlib --------- * Remove token from integration tests file * Provide sgRNA_sequences to plot_nucleotide_quilt plots * Passing sgRNA_sequences to plot * Refactor check for determining when to use CRISPREssoPro or matplotlib for Batch plots * Add max-height to Batch report samples * Change testing branch * Fix wrong check for large Batch plots * Fix typo and move flexiguide to debug (#77) * Change flexiguide output to debug level * Fix typo in fastp merged output file name * Adding id tags for d3 script enhancements * pointing to test branch * Add amplicon_name parameter to allele heatmap and line plots * Add function to extract quantification window regions from include_idxs * Scale the quantification window according to the coordinates of the sgRNA plot * added c2pro check, added space in args.json * Correct the quantification window indexes for multiple guides * Fix name of nucleotide conversion plot when guides are not the same * Fix jinja variables that aren't found * Fix multiple guide errors where the wrong sgRNA sequence was associated in d3 plot * Remove unneeded variable and extra whitespace * Switch test branch to master --------- * Replace zcat with gunzip -c in `get_most_frequent_reads` --------- Co-authored-by: Trevor Martin <[email protected]> Co-authored-by: Samuel Nichols <[email protected]> Co-authored-by: mbowcut2 <[email protected]>
mbowcut2
added a commit
to edilytics/CRISPResso2
that referenced
this pull request
Oct 14, 2024
* D3-Enhancements (#78) * Sam/try plots (#71) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Point test to try-plots * Fix d3 not showing and plotly mixing with matplotlib * Use logger for warnings and debug statements * Point tests back at master --------- * Sam/fix plots (#72) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Fix d3 not showing and plotly mixing with matplotlib --------- * Remove token from integration tests file * Provide sgRNA_sequences to plot_nucleotide_quilt plots * Passing sgRNA_sequences to plot * Refactor check for determining when to use CRISPREssoPro or matplotlib for Batch plots * Add max-height to Batch report samples * Change testing branch * Fix wrong check for large Batch plots * Fix typo and move flexiguide to debug (#77) * Change flexiguide output to debug level * Fix typo in fastp merged output file name * Adding id tags for d3 script enhancements * pointing to test branch * Add amplicon_name parameter to allele heatmap and line plots * Add function to extract quantification window regions from include_idxs * Scale the quantification window according to the coordinates of the sgRNA plot * added c2pro check, added space in args.json * Correct the quantification window indexes for multiple guides * Fix name of nucleotide conversion plot when guides are not the same * Fix jinja variables that aren't found * Fix multiple guide errors where the wrong sgRNA sequence was associated in d3 plot * Remove unneeded variable and extra whitespace * Switch test branch to master --------- * Replace zcat with gunzip -c in `get_most_frequent_reads` --------- Co-authored-by: Trevor Martin <[email protected]> Co-authored-by: Samuel Nichols <[email protected]> Co-authored-by: mbowcut2 <[email protected]>
mbowcut2
added a commit
to edilytics/CRISPResso2
that referenced
this pull request
Nov 8, 2024
* D3-Enhancements (#78) * Sam/try plots (#71) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Point test to try-plots * Fix d3 not showing and plotly mixing with matplotlib * Use logger for warnings and debug statements * Point tests back at master --------- * Sam/fix plots (#72) * Fix batch mode pandas warning. (#70) * refactor to call method on DataFrame, rather than Series. Removes warning. * Fix pandas future warning in CRISPRessoWGS --------- * Functional * Cole/fix status file name (#69) * Update config file logging messages This removes printing the exception (which is essentially a duplicate), and adds a condition if no config file was provided. Also changes `json` to `config` so that it is more clear. * Fix divide by zero when no amplicons are present in Batch mode * Don't append file_prefix to status file name * Place status files in output directories * Update tests branch for file_prefix addition * Load D3 and plotly figures with pro with multiple amplicons * Update batch * Fix bug in CRISPRessoCompare with pointing to report datas with file_prefix Before this fix, when using a file_prefix the second run that was compared would not be displayed as a data in the first figure of the report. * Import CRISPRessoPro instead of importing the version When installed via conda, the version is not available * Remove `get_amplicon_output` unused function from CRISPRessoCompare Also remove unused argparse import * Implement `get_matching_allele_files` in CRISPRessoCompare and accompanying unit tests * Allow for matching of multiple guides in the same amplicon * Fix pandas FutureWarning * Change test branch back to master --------- * Try catch all futures * Fix test fail plots * Fix d3 not showing and plotly mixing with matplotlib --------- * Remove token from integration tests file * Provide sgRNA_sequences to plot_nucleotide_quilt plots * Passing sgRNA_sequences to plot * Refactor check for determining when to use CRISPREssoPro or matplotlib for Batch plots * Add max-height to Batch report samples * Change testing branch * Fix wrong check for large Batch plots * Fix typo and move flexiguide to debug (#77) * Change flexiguide output to debug level * Fix typo in fastp merged output file name * Adding id tags for d3 script enhancements * pointing to test branch * Add amplicon_name parameter to allele heatmap and line plots * Add function to extract quantification window regions from include_idxs * Scale the quantification window according to the coordinates of the sgRNA plot * added c2pro check, added space in args.json * Correct the quantification window indexes for multiple guides * Fix name of nucleotide conversion plot when guides are not the same * Fix jinja variables that aren't found * Fix multiple guide errors where the wrong sgRNA sequence was associated in d3 plot * Remove unneeded variable and extra whitespace * Switch test branch to master --------- * Replace zcat with gunzip -c in `get_most_frequent_reads` --------- Co-authored-by: Trevor Martin <[email protected]> Co-authored-by: Samuel Nichols <[email protected]> Co-authored-by: mbowcut2 <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Replace
zcatwithgunzip -cinget_most_frequent_readsasgunzip -cis more reliable on most systems.