Add a warning when the user runs an outdated Raspberry Pi OS

src/locales/c.json

@@ -103,6 +103,8 @@
   "msg.modal-p2": "",
   "msg.offline.not-responsing": "",
   "msg.offline.please-wait": "",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": "",
   "msg.sla-pour-resin": "",
   "msg.sla-refill": "",
   "msg.sysupgrade.pending": "",

src/locales/source/cs.json

@@ -275,5 +275,7 @@
   "logs.file-size-unknown": "",
   "ntf.calibration-error": "",
   "ntf.low-resin.message": "",
-  "ntf.low-resin.title": ""
+  "ntf.low-resin.title": "",
+  "msg.outdated-os.message": "PrusaLink běží na zastaralém obrazu systému. Nahrajte ho prosím znovu podle <a href='https://help.prusa3d.com/guide/_221744#222170'>tohoto návodu</a>. Bohužel bude nutné PrusaLink znovu nastavit",
+  "msg.outdated-os.title": "Raspberry Pi OS je zastaralý"
 }

src/locales/source/de.json

@@ -289,5 +289,7 @@
   "logs.file-size-unknown": "Die Protokolldatei hat eine unbekannte Größe und ist daher nur zum Herunterladen verfügbar",
   "ntf.calibration-error": "Kalibrierungsfehler",
   "ntf.low-resin.message": "Die gemessene Harzmenge ist zu gering. Der Druck kann fortgesetzt werden, es kann jedoch ein Nachfüllen erforderlich sein.",
-  "ntf.low-resin.title": "Harz niedrig"
+  "ntf.low-resin.title": "Harz niedrig",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/en.json

@@ -278,5 +278,7 @@
   "msg.sysupgrade.title": "Upgrade System Package?",
   "msg.sysupgrade.wait-for-printer": "Waiting for the printer...",
   "conn.error_status": "Error",
-  "conn.printer.not-supported": ""
+  "conn.printer.not-supported": "",
+  "msg.outdated-os.message": "Your PrusaLink is running on an outdated Raspberry Pi OS. Follow <a href='https://help.prusa3d.com/guide/_221744#222170'>this guide to flash the latest version</a>. This will reset PrusaLink",
+  "msg.outdated-os.title": "Raspberry Pi OS is out-of-date"
 }

src/locales/source/es.json

@@ -270,5 +270,7 @@
   "logs.file-size-unknown": "El archivo de registro es de tamaño desconocido y, por lo tanto, solo está disponible para su descarga.",
   "ntf.calibration-error": "Error de calibración",
   "ntf.low-resin.message": "El volumen de resina medido es demasiado bajo. La impresión puede continuar, sin embargo, es posible que se requiera una recarga.",
-  "ntf.low-resin.title": "Poca resina"
+  "ntf.low-resin.title": "Poca resina",
+  "msg.outdated-os.message": "Tu PrusaLink está funcionando con un Raspberry Pi OS obsoleto. Sigue <a href='https://help.prusa3d.com/guide/_221744#222170'>esta guía para flashear la última versión</a>. Esto reiniciará PrusaLink",
+  "msg.outdated-os.title": "El SO de la Raspberry Pi está desactualizado"
 }

src/locales/source/fr.json

@@ -281,5 +281,7 @@
   "logs.file-size-unknown": "Le fichier de journal est d'une taille inconnue et n'est donc disponible que pour le téléchargement",
   "ntf.calibration-error": "Erreur de Calibration",
   "ntf.low-resin.message": "Le volume de résine mesuré est trop bas. L'impression peut continuer, mais un remplissage pourra être nécessaire.",
-  "ntf.low-resin.title": "Niveau de résine bas"
+  "ntf.low-resin.title": "Niveau de résine bas",
+  "msg.outdated-os.message": "Votre PrusaLink fonctionne sur un système un Raspberry Pi OS obsolète. Suivez <a href='https://help.prusa3d.com/guide/_221744#222170'>ce guide pour flasher la dernière version</a>. Cela réinitialisera PrusaLink",
+  "msg.outdated-os.title": "Raspberry Pi OS est obsolète"
 }

src/locales/source/it.json

@@ -270,5 +270,7 @@
   "logs.file-size-unknown": "Il file di log è di dimensioni sconosciute e quindi è disponibile solo per il download.",
   "ntf.calibration-error": "Errore di calibrazione",
   "ntf.low-resin.message": "Il volume di resina misurato è troppo basso. La stampa può continuare, ma potrebbe essere necessaria una ricarica.",
-  "ntf.low-resin.title": "Resina bassa"
+  "ntf.low-resin.title": "Resina bassa",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/kr.json

@@ -279,5 +279,7 @@
   "logs.file-size-unknown": "로그파일의 크기를 알 수 없으므로 다운로드만 가능합니다.",
   "ntf.calibration-error": "캘리브레이션 에러",
   "ntf.low-resin.message": "측정된 레진양이 적습니다. 인쇄는 계속할 수 있지만 리필이 필요할 수는 있습니다.",
-  "ntf.low-resin.title": "레진 부족함"
+  "ntf.low-resin.title": "레진 부족함",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/lt.json

@@ -278,5 +278,7 @@
   "logs.file-size-unknown": "",
   "ntf.calibration-error": "",
   "ntf.low-resin.message": "",
-  "ntf.low-resin.title": ""
+  "ntf.low-resin.title": "",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/nl.json

@@ -278,5 +278,7 @@
   "logs.file-size-unknown": "",
   "ntf.calibration-error": "",
   "ntf.low-resin.message": "",
-  "ntf.low-resin.title": ""
+  "ntf.low-resin.title": "",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/pl.json

@@ -270,5 +270,7 @@
   "logs.file-size-unknown": "Plik logu ma nieznany rozmiar i dlatego jest dostępny tylko do pobrania",
   "ntf.calibration-error": "Błąd kalibracji",
   "ntf.low-resin.message": "Zmierzona ilość żywicy jest zbyt niska. Drukowanie można kontynuować, jednak konieczne może być uzupełnienie w trakcie.",
-  "ntf.low-resin.title": "Niski poziom żywicy"
+  "ntf.low-resin.title": "Niski poziom żywicy",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/locales/source/sk.json

@@ -281,5 +281,7 @@
   "logs.file-size-unknown": "",
   "ntf.calibration-error": "",
   "ntf.low-resin.message": "",
-  "ntf.low-resin.title": ""
+  "ntf.low-resin.title": "",
+  "msg.outdated-os.message": "",
+  "msg.outdated-os.title": ""
 }

src/printer/components/settings.js

@@ -13,12 +13,13 @@ import {
   getSerialNumber,
 } from "./settingsActions";
 import { handleError } from "./errors";
-import { success } from "./toast";
+import {success, warning} from "./toast";
 import { modal } from "./modal";
 
 let serialNumber = null;
 let prusaLinkVersion = null;
 let connectUrl = null;
+let shownOutdatedOs = false;
 
 const logsModule = process.env.WITH_LOGS
   ? require("./settings/logs").default
@@ -68,13 +69,27 @@ function updateApiKey(apiKey) {
   }
 }
 
+function checkOldLink(data) {
+  if (shownOutdatedOs ||
+      typeof data.version.system === "undefined" ||
+      typeof data.version.system.RELEASE === "undefined" ||
+      data.version.system.RELEASE >= 12) {
+    return;
+  }
+  const message = translate("msg.outdated-os.message");
+  const title = translate("msg.outdated-os.title");
+  warning(title, message, ()=> {}, false);
+  shownOutdatedOs = true;
+}
+
 function initBaseSettings() {
   getJson("/api/version?system=1")
     .then((result) => {
       const data = {
         version: result.data,
       };
       prusaLinkVersion = data.version.server;
+      checkOldLink(data);
       updateProperties("settings", data);
       updateSystemVersionProperties(data);
     })

src/printer/components/toast.js

@@ -35,7 +35,7 @@ export const createToast = (title, message, type) => {
  *  onClose: () => void,
  * }}
  */
-function show({ title, message, type, onClose }) {
+function show({ title, message, type, onClose, autoClose = true }) {
   const article = createToast(title, message, type);
   const close = () => {
     if (toast_context.contains(article)) {
@@ -50,7 +50,7 @@ function show({ title, message, type, onClose }) {
   });
 
   const timeout = timeouts[type];
-  if (timeout)
+  if (timeout && autoClose)
     setTimeout(close, timeout);
 
   toast_context.appendChild(article);
@@ -62,8 +62,8 @@ function show({ title, message, type, onClose }) {
  * @param {string} message
  * @param {() => void | undefined} onClose
  */
-export function info(title, message, onClose) {
-  show({ type: "info", title, message, onClose });
+export function info(title, message, onClose , autoClose = true ) {
+  show({ type: "info", title, message, onClose, autoClose });
 }
 
 /**
@@ -72,8 +72,8 @@ export function info(title, message, onClose) {
  * @param {string} message
  * @param {() => void | undefined} onClose
  */
-export function warning(title, message, onClose) {
-  show({ type: "warning", title, message, onClose });
+export function warning(title, message, onClose , autoClose = true ) {
+  show({ type: "warning", title, message, onClose, autoClose });
 }
 
 /**
@@ -82,8 +82,8 @@ export function warning(title, message, onClose) {
  * @param {string} message
  * @param {() => void | undefined} onClose
  */
-export function success(title, message, onClose) {
-  show({ type: "success", title, message, onClose });
+export function success(title, message, onClose , autoClose = true ) {
+  show({ type: "success", title, message, onClose, autoClose });
 }
 
 /**
@@ -92,8 +92,8 @@ export function success(title, message, onClose) {
  * @param {string} message
  * @param {() => void | undefined} onClose
  */
-export function error(title, message, onClose) {
-  show({ type: "error", title, message, onClose });
+export function error(title, message, onClose , autoClose = true ) {
+  show({ type: "error", title, message, onClose, autoClose });
 }
 
 export default { info, warning, success, error };