Merge pull request adafruit#746 from blmorris/master

Enable 16-bit memory addresses for i2c.mem_read and i2c_mem_write

stmhal/i2c.c

@@ -453,14 +453,15 @@ STATIC mp_obj_t pyb_i2c_recv(uint n_args, const mp_obj_t *args, mp_map_t *kw_arg
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_recv_obj, 1, pyb_i2c_recv);
 
-/// \method mem_read(data, addr, memaddr, timeout=5000)
+/// \method mem_read(data, addr, memaddr, timeout=5000, addr_size=8)
 ///
 /// Read from the memory of an I2C device:
 ///
 ///   - `data` can be an integer or a buffer to read into
 ///   - `addr` is the I2C device address
 ///   - `memaddr` is the memory location within the I2C device
 ///   - `timeout` is the timeout in milliseconds to wait for the read
+///   - `addr_size` selects width of memaddr: 8 or 16 bits
 ///
 /// Returns the read data.
 /// This is only valid in master mode.
@@ -469,6 +470,7 @@ STATIC const mp_arg_t pyb_i2c_mem_read_args[] = {
     { MP_QSTR_addr,    MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
     { MP_QSTR_memaddr, MP_ARG_REQUIRED | MP_ARG_INT, {.u_int = 0} },
     { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 5000} },
+    { MP_QSTR_addr_size, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} },
 };
 #define PYB_I2C_MEM_READ_NUM_ARGS MP_ARRAY_SIZE(pyb_i2c_mem_read_args)
 
@@ -490,8 +492,13 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw
     // get the addresses
     mp_uint_t i2c_addr = vals[1].u_int << 1;
     mp_uint_t mem_addr = vals[2].u_int;
+    // determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width
+    mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT;
+    if (vals[4].u_int != 8) {
+        mem_addr_size = I2C_MEMADD_SIZE_16BIT;
+    }
 
-    HAL_StatusTypeDef status = HAL_I2C_Mem_Read(self->i2c, i2c_addr, mem_addr, I2C_MEMADD_SIZE_8BIT, bufinfo.buf, bufinfo.len, vals[3].u_int);
+    HAL_StatusTypeDef status = HAL_I2C_Mem_Read(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int);
 
     if (status != HAL_OK) {
         // TODO really need a HardwareError object, or something
@@ -507,14 +514,15 @@ STATIC mp_obj_t pyb_i2c_mem_read(uint n_args, const mp_obj_t *args, mp_map_t *kw
 }
 STATIC MP_DEFINE_CONST_FUN_OBJ_KW(pyb_i2c_mem_read_obj, 1, pyb_i2c_mem_read);
 
-/// \method mem_write(data, addr, memaddr, timeout=5000)
+/// \method mem_write(data, addr, memaddr, timeout=5000, addr_size=8)
 ///
 /// Write to the memory of an I2C device:
 ///
 ///   - `data` can be an integer or a buffer to write from
 ///   - `addr` is the I2C device address
 ///   - `memaddr` is the memory location within the I2C device
 ///   - `timeout` is the timeout in milliseconds to wait for the write
+///   - `addr_size` selects width of memaddr: 8 or 16 bits
 ///
 /// Returns `None`.
 /// This is only valid in master mode.
@@ -537,8 +545,13 @@ STATIC mp_obj_t pyb_i2c_mem_write(uint n_args, const mp_obj_t *args, mp_map_t *k
     // get the addresses
     mp_uint_t i2c_addr = vals[1].u_int << 1;
     mp_uint_t mem_addr = vals[2].u_int;
+    // determine width of mem_addr; default is 8 bits, entering any other value gives 16 bit width
+    mp_uint_t mem_addr_size = I2C_MEMADD_SIZE_8BIT;
+    if (vals[4].u_int != 8) {
+        mem_addr_size = I2C_MEMADD_SIZE_16BIT;
+    }
 
-    HAL_StatusTypeDef status = HAL_I2C_Mem_Write(self->i2c, i2c_addr, mem_addr, I2C_MEMADD_SIZE_8BIT, bufinfo.buf, bufinfo.len, vals[3].u_int);
+    HAL_StatusTypeDef status = HAL_I2C_Mem_Write(self->i2c, i2c_addr, mem_addr, mem_addr_size, bufinfo.buf, bufinfo.len, vals[3].u_int);
 
     if (status != HAL_OK) {
         // TODO really need a HardwareError object, or something

stmhal/qstrdefsport.h

@@ -161,6 +161,7 @@ Q(baudrate)
 Q(gencall)
 Q(data)
 Q(memaddr)
+Q(addr_size)
 Q(timeout)
 Q(init)
 Q(deinit)