OctoPrint-Framer

author:

• Ricardo Riet Correa

license:

GNUv3

date:

2022-04-05

Links

homepage: https://github.com/rriet/OctoPrint-Framer

source: https://github.com/rriet/OctoPrint-Framer

archive: https://github.com/rriet/OctoPrint-Framer/archive/master.zip

Description

This plugin adds a button to verify the working area of a Gcode on a CNC or Laser cutter. It works by extracting the maximum and minimum X and Y and sending a G0 code to move the CNC/Laser to the corner locations.

tags:

• Octoprint
• Laser
• CNC

screenshots:

Setup

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/rriet/OctoPrint-Framer/archive/master.zip

Usage

Configuration

After installation restart OctoPrint, go to the Settings tab and set the CNC/Laser movement speed.

Frame function

• Connect the CNC/Laser
• Upload and load the Gcode file
• Home the CNC/Laser or use a G92 code to set the origin point
• Click the Frame button
• Observe the movement of the CNC/Laser to see where the work area is on the plataform. Be ready to stop the machine to avoid colisions.

Warmings:

• The plugin will not move the Z axis
• Make sure the area is clear to avoid colisions.

Disclaimer:

I, the plugin author cannot be held responsible for any damage to equipment or injuries that may arise from using the plugin. I, the plugin author, make no guarantees that this plugin will work or continue to work.