fix broken links to modes.md

sensei-hacker · Apr 1, 2024 · 9146001 · 9146001
1 parent 2612c13
commit 9146001
Show file tree

Hide file tree

Showing 4 changed files with 6 additions and 7 deletions.
diff --git a/build_docs.sh b/build_docs.sh
@@ -21,7 +21,6 @@ doc_files=(
 	'Buzzer.md'
 	'Sonar.md'
 	'Profiles.md'
-	'Modes.md'
 	'Inflight Adjustments.md'
 	'Controls.md'
 	'Gtune.md'
@@ -49,7 +48,7 @@ if which gimli >/dev/null; then
 	done
 	rm -f ${filename}.pdf
 	gimli -f ${filename}.md -stylesheet override.css \
-	  -w '--toc --title "Cleanflight Manual" --footer-right "[page]" --toc-depth 1'
+	  -w '--toc --title "INAV Manual" --footer-right "[page]" --toc-depth 1'
 	rm ${filename}.md
 	popd >/dev/null
 else

diff --git a/docs/API/MSP_extensions.md b/docs/API/MSP_extensions.md
@@ -23,7 +23,7 @@ Unassigned slots have rangeStartStep == rangeEndStep. Each element contains the
 
 | Data | Type | Notes |
 |------|------|-------|
-| permanentId | uint8 | See Modes.md for a definition of the permanent ids |
+| permanentId | uint8 | See [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for a definition of the permanent ids |
 | auxChannelIndex | uint8 | The Aux switch number (indexed from 0) |
 | rangeStartStep | uint8 | The start value for this element in 'blocks' of 25  where 0 == 900 and 48 == 2100 |
 | rangeEndStep | uint8 | The end value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
@@ -45,7 +45,7 @@ sending this message for all auxiliary slots.
 | Data | Type | Notes |
 |------|------|-------|
 | sequence id | uint8 | A monotonically increasing ID, from 0 to the number of slots -1 |
-| permanentId | uint8 | See Modes.md for a definition of the permanent ids |
+| permanentId | uint8 | See [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for a definition of the permanent ids |
 | auxChannelIndex | uint8 | The Aux channel number (indexed from 0) |
 | rangeStartStep | uint8 | The start value for this element in 'blocks' of 25  where 0 == 900 and 48 == 2100 |
 | rangeEndStep | uint8 | The end value for this element in 'blocks' of 25 where 0 == 900 and 48 == 2100 |
@@ -157,5 +157,5 @@ INAV.
 
 See also
 --------
-Modes.md describes the user visible implementation for the INAV
+[The wiki](https://github.com/iNavFlight/inav/wiki/Modes) describes the user visible implementation for the INAV
 modes extension.
diff --git a/docs/Getting Started.md b/docs/Getting Started.md
@@ -70,7 +70,7 @@ Now, there are two ways to [configure CF](Configuration.md); via  the Configurat
     * Verify the range of each channel goes from ~1000 to ~2000.  See also [controls](Controls.md). and `rx_min_usec` and `rx_max_usec`.
     * You can also set EXPO here instead of your Tx.
     * Click Save!
-* Modes tab: Setup the desired modes. See the [modes](Modes.md) chapter for what each mode does, but for the beginning you mainly need HORIZON, if any.
+* Modes tab: Setup the desired modes. See the [Modes in the wiki](https://github.com/iNavFlight/inav/wiki/Modes) for what each mode does.
 
 * Before finishing this section, you should calibrate the ESCs, install the FC to the frame, and connect the RSSI cable, buzzer and battery if you have chosen to use those.
 

diff --git a/docs/Safety.md b/docs/Safety.md
@@ -6,7 +6,7 @@ As many can attest, multirotors and RC models in general can be very dangerous,
 
 ## Before Installing
 
-Please consult the [Cli](Cli.md), [Controls](Controls.md), [Failsafe](Failsafe.md) and [Modes](Modes.md) 
+Please consult the [Cli](Cli.md), [Controls](Controls.md), [Failsafe](Failsafe.md) and [Modes](https://github.com/iNavFlight/inav/wiki/Modes) 
 pages for further important information.
 
 You are highly advised to use the Receiver tab in the INAV Configurator, making sure your Rx channel