WRITE IN THE FIRST

This repo current is based on bouffalo_sdk:v2.0.0 and give a bsp support for M0sDock(bl616) and M0pDock(bl618) to let you develop our boards easily.

There are also exclusive repo below for specific boards:

• M0sDock

• M0pDock

PREPARE THE ENVIRONMENT

Refer to this repo bouffalo_sdk, and follow the Environment Setup to download toolchain you needed and then complete the Command Line Development.

After that, clone this repo and keep going on.

git clone https://github.com/sipeed/M0P_BL618_examples.git && cd "$(basename "$_" .git)"
git submodule update --init

tips: it will be a long time, you can change the submodule's url to faster mirror maybe

Finally we get all preparation finished, and now let's start the next example.

TRY EXAMPLES

M0pDock

M0pDock has many differences from the official bl616dk, so take patch on the official sdk is needed for normal use of the lcd, the touch and the camera.

cd bouffalo_sdk
git am ../sipeed_support/fixes/m0pdock/*.patch && cd -

Now you can compile all examples we provided in sipeed_support/examples/m0pdock like pt(product testing).

cd sipeed_support/examples/m0pdock
cd pt
make # or make ninja
make flash COMX=/dev/ttyACMx # or COMxx if you are on Windows

Examples in the official SDK also can be tested. But you have pay attention on the Makefile in every example:

• CHIP MUST be bl618

• BOARD MUST be set to m0pdock

• BOARD_DIR MUST be set to /path_to_this_repo_in_your_computer/sipeed_support/boards

example,

BOARD ?= m0pdock
SIPEED_SUPPORT ?= $(realpath $(BL_SDK_BASE)/../sipeed_support)
BOARD_DIR ?= $(SIPEED_SUPPORT)/boards

Then make or make ninja and make flash COMX=xxx just like the above.