Generic65 is an open-source 65% keyboard case. It uses a gasket mounting style and was designed around the KBD67v2 MKII PCB. The plate supports the following layout that everyone seems to love:
Note that this design has not been prototyped or tested, please use at your own risk.
- 65% layout with arrow blocker
- Includes Top Right Blocker and no Top Blocker options
- 5 degree typing angle
- ~18mm front height
- M3x0.5 10mm case screws
- 8x2.5mm 3M bumpons for case feet
- Leverages AEBoards' gasket design https://www.aeboards.com/resources
- 1mm distance between plate and case (66% compression with 1.5mm gasket, 50% compression with 2mm gaskets)
Case design is licensed under Apache License 2.0.
TLDR; this means:
- You are free to use for private and commercial use
- You are free to distribute and modify the files
- Any modifications to the design must also be licensed under Apache 2.0
- Any modifications to the design must be documented
- You must add an attribution notice to any derivative works
- Design cannot be trademarked
- I am not liable for anything that comes out of you using this design
- Design provided as is with no warranty
Although not required, it would be great if you notify me before running any form of group-buy with the Generic65 or its derivatives.