Service registry bridge for Docker, sponsored by Weave.
Registrator automatically register/deregisters services for Docker containers based on published ports and metadata from the container environment. Registrator supports pluggable service registries, which currently includes Consul, etcd and SkyDNS 2.
By default, it can register services without any user-defined metadata. This means it works with any container, but allows the container author or Docker operator to override/customize the service definitions.
You can get the latest release of Registrator via Docker Hub:
$ docker pull gliderlabs/registrator:latest
You can pull the last build in master with the master tag. If you want to get a specific release, you can download the release artifact listed in Releases and docker load them:
$ curl -s https://dl.gliderlabs.com/registrator/v5.tgz | docker load
Registrator was designed to just be run as a container. You must pass the Docker socket file as a mount to /tmp/docker.sock, and it's a good idea to set the hostname to the machine host:
$ docker run -d \
-v /var/run/docker.sock:/tmp/docker.sock \
-h $HOSTNAME gliderlabs/registrator <registry-uri>
By default, when registering a service, registrator will assign the service address by attempting to resolve the current hostname. If you would like to force the service address to be a specific address, you can specify the -ip argument.
If the argument -internal is passed, registrator will register the docker0 internal ip and port instead of the host mapped ones. (etcd, consul, and skydns2 for now). The -internal argument must be passed before the <registry-uri> argument.
The -resync argument controls how often registrator will query Docker for all containers and reregister all services. This allows registrator and the service registry to get back in sync if they fall out of sync. The time is measured in seconds, and if set to zero will not resync.
The consul backend does not support automatic expiry of stale registrations after some TTL. Instead, TTL checks must be configured (see below). For backends that do support TTL expiry, registrator can be started with the -ttl and -ttl-refresh arguments (both disabled by default).
Registrator will discover services running in Docker net=host mode provided that their exposed ports are explicitly listed using the -p flag:
$ docker run --net=host -p 8080:8080 -p 8443:8443 ...
The registry backend to use is defined by a URI. The scheme is the supported registry name, and an address. Registries based on key-value stores like etcd and Zookeeper (not yet supported) can specify a key path to use to prefix service definitions. Registries may also use query params for other options. See also Adding support for other service registries.
To use the Consul service catalog, specify a Consul URI without a path. If no host is provided, 127.0.0.1:8500 is used. Examples:
$ registrator consul://10.0.0.1:8500
$ registrator consul:
This backend comes with support for specifying service health checks. See backend specific features.
The Consul backend also lets you just use the key-value store. This mode is enabled by specifying a path. Consul key-value support does not currently use service attributes/tags. Example URIs:
$ registrator consul:///path/to/services
$ registrator consul://192.168.1.100/services
Service definitions are stored as:
<registry-uri-path>/<service-name>/<service-id> = <ip>:<port>
Etcd support works similar to Consul key-value. It also currently doesn't support service attributes/tags. If no host is provided, 127.0.0.1:4001 is used. Example URIs:
$ registrator etcd:///path/to/services
$ registrator etcd://192.168.1.100:4001/services
Service definitions are stored as:
<registry-uri-path>/<service-name>/<service-id> = <ip>:<port>
SkyDNS 2 support uses an etcd key-value store, writing service definitions in a format compatible with SkyDNS 2. The URI provides an etcd host and a DNS domain name. If no host is provided, 127.0.0.1:4001 is used. The DNS domain name may not be omitted. Example URIs:
$ registrator skydns2:///skydns.local
$ registrator skydns2://192.168.1.100:4001/staging.skydns.local
Using the second example, a service definition for a container with service-name "redis" and service-id "redis-1" would be stored in the etcd service at 192.168.1.100:4001 as follows:
/skydns/local/skydns/staging/<service-name>/<service-id> = {"host":"<ip>","port":<port>}
Note that the default service-id includes more than the container name (see below). For legal per-container DNS hostnames, specify the SERVICE_ID in the environment of the container, e.g.:
docker run -d --name redis-1 -e SERVICE_ID=redis-1 -p 6379:6379 redis
Services are registered and deregistered based on container start and die events from Docker. The service definitions are created with information from the container, including user-defined metadata in the container environment.
For each published port of a container, a Service object is created and passed to the ServiceRegistry to register. A Service object looks like this with defaults explained in the comments:
type Service struct {
ID string // <hostname>:<container-name>:<internal-port>[:udp if udp]
Name string // <basename(container-image)>[-<internal-port> if >1 published ports]
Port int // <host-port>
IP string // <host-ip> || <resolve(hostname)> if 0.0.0.0
Tags []string // empty, or includes 'udp' if udp
Attrs map[string]string // any remaining service metadata from environment
}
Most of these (except IP and Port) can be overridden by container environment metadata variables prefixed with SERVICE_ or SERVICE_<internal-port>_. You use a port in the key name to refer to a particular port's service. Metadata variables without a port in the name are used as the default for all services or can be used to conveniently refer to the single exposed service.
Additional supported metadata in the same format SERVICE_<metadata>.
IGNORE: Any value for ignore tells registrator to ignore this entire container and all associated ports.
Since metadata is stored as environment variables, the container author can include their own metadata defined in the Dockerfile. The operator will still be able to override these author-defined defaults.
$ docker run -d --name redis.0 -p 10000:6379 dockerfile/redis
Results in Service:
{
"ID": "hostname:redis.0:6379",
"Name": "redis",
"Port": 10000,
"IP": "192.168.1.102",
"Tags": [],
"Attrs": {}
}
$ docker run -d --name redis.0 -p 10000:6379 \
-e "SERVICE_NAME=db" \
-e "SERVICE_TAGS=master,backups" \
-e "SERVICE_REGION=us2" dockerfile/redis
Results in Service:
{
"ID": "hostname:redis.0:6379",
"Name": "db",
"Port": 10000,
"IP": "192.168.1.102",
"Tags": ["master", "backups"],
"Attrs": {"region": "us2"}
}
Keep in mind not all of the Service object may be used by the registry backend. For example, currently none of them support registering arbitrary attributes. This field is there for future use.
$ docker run -d --name nginx.0 -p 4443:443 -p 8000:80 progrium/nginx
Results in two Service objects:
[
{
"ID": "hostname:nginx.0:443",
"Name": "nginx-443",
"Port": 4443,
"IP": "192.168.1.102",
"Tags": [],
"Attrs": {},
},
{
"ID": "hostname:nginx.0:80",
"Name": "nginx-80",
"Port": 8000,
"IP": "192.168.1.102",
"Tags": [],
"Attrs": {}
}
]
$ docker run -d --name nginx.0 -p 4443:443 -p 8000:80 \
-e "SERVICE_443_NAME=https" \
-e "SERVICE_443_ID=https.12345" \
-e "SERVICE_443_SNI=enabled" \
-e "SERVICE_80_NAME=http" \
-e "SERVICE_TAGS=www" progrium/nginx
Results in two Service objects:
[
{
"ID": "https.12345",
"Name": "https",
"Port": 4443,
"IP": "192.168.1.102",
"Tags": ["www"],
"Attrs": {"sni": "enabled"},
},
{
"ID": "hostname:nginx.0:80",
"Name": "http",
"Port": 8000,
"IP": "192.168.1.102",
"Tags": ["www"],
"Attrs": {}
}
]
As you can see by either the Consul or etcd source files, writing a new registry backend is easy. Just follow the example set by those two. It boils down to writing an object that implements this interface:
type RegistryAdapter interface {
Ping() error
Register(service *Service) error
Deregister(service *Service) error
Refresh(service *Service) error
}
Then add a factory which accepts a uri and returns the registry adapter, and register that factory with the bridge like bridge.Register(new(Factory), "<backend_name>").
All health checking integration is going to change soon, so consider these features deprecated.
When using the Consul's service catalog backend, you can specify a health check associated with a service. Registrator can pull this from your container environment data if provided. Here are some examples:
This feature is only available when using the check-http script that comes with the progrium/consul container for Consul.
SERVICE_80_CHECK_HTTP=/health/endpoint/path
SERVICE_80_CHECK_INTERVAL=15s
It works for an HTTP service on any port, not just 80. If its the only service, you can also use SERVICE_CHECK_HTTP.
This feature is only available when using the check-cmd script that comes with the progrium/consul container for Consul.
SERVICE_9000_CHECK_CMD=/path/to/check/script
This runs the command using this service's container image as a separate container attached to the service's network namespace.
SERVICE_CHECK_SCRIPT=curl --silent --fail example.com
The default interval for any non-TTL check is 10s, but you can set it with _CHECK_INTERVAL. The check command will be
interpolated with the $SERVICE_IP and $SERVICE_PORT placeholders:
SERVICE_CHECK_SCRIPT=nc $SERVICE_IP $SERVICE_PORT | grep OK
SERVICE_CHECK_TTL=30s
Remember, this means Consul will be expecting a heartbeat ping within that 30 seconds to keep the service marked as healthy.
As usual, pull requests are welcome. You can also propose releases by opening a PR against the release branch from master. Please be sure to bump the version and update CHANGELOG.md and include your changelog text in the PR body.
Discuss registrator development with us on Freenode in #gliderlabs.
- Zookeeper backend
- discoverd backend
- Netflix Eureka backend
- etc...
Ongoing support of this project is made possible by Weave, the Docker SDN. Big thanks to Michael Crosby for skydock and the Consul mailing list for inspiration.
BSD