Flipper addons by Electronic Cats

ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v14 & v15) using RS485 internal network.

RS485 to Wi-Fi gateway.

🍀 A SLAM-Robot-Controller to drive six-dc-motors with rotary-encoder use RS485/CAN BUS to communicate with Jetson TX2

A project that logs data from sofar solar inverter and sends the data to blynk server using RS485 modbus interface.

Easy to use RS485 Master Library.

sc16is750/752 driver for esp-idf

Simple OPC Server bases on prOPC (Delphi)

ElectroSoul EMS configuration tool.

SMWiredPy is python library for Sensemore vibration/accelerometer sensors

Process fragmented bytes via a buffer to packages

Sistema de monitoreo GSM para compost / GSM compost monitoring system

Generic Sensor and RS485 EKM Meter Gateway

This is a Wing board for the RS-485 transceiver, which will convert a UART serial stream to RS-485

A smart Battery Management System(BMS) that supports external communication protocols UART,RS232,RS485,Bluetooth,CAN

This is a package that makes MDROBOT's motor driver available in ROS2.

This is a temperature sensor package designed for modbus. Implemented in pymodbus only.

This is a LAN system library using UART on Raspberry Pi Pico.

Contains examples of Modbus (RS485) communication with Arduino. In the examples, Arduino Mega is used as the Master, and Arduino Uno is used as the Slaves. The Arduino RS485 Module is used for RS485 communication. There are three examples in the repository.

CERN NSW Micromegas Detectors gas Dew point (DMT143) measurement with RS485 comunication