Update nice-nano.mdx

docs/build-guides/lily58-wireless/nice-nano.mdx

@@ -48,7 +48,7 @@ If you're using the included headers, you'll need to install your battery **befo
   <TabItem value="no-solder" label="No-Solder Hotswap">
 ```
 Since these are ***no***-solder headers, you won't need to solder anything. Just follow the steps below to install your header to the PCB.
-  1. Take your headers (the part with the holes) and insert them into the top of the PCB (the side with the JST, power switch, and reset button)
+  1. Take your headers and insert them into the top of the PCB (the side with the JST, power switch, and reset button)
   2. Use the plastic part of the header to push the pins into the PCB. The plastic should be flush with the PCB when fully inserted
 ```mdx-code-block
   </TabItem>